$Id$ Approximate change log for AVRDUDE by version. (For detailed changes, see the version control system logs.) ---------------------------------------------------------------------- Changes since version 6.4: * Major changes compared to the previous version: - Completely revamped Windows support, including MSVC - Started to add CMake (by now, parallel with autoconf/automake) - New-architecture devices (AVR8X mega and tiny) can access all fuses, and memory display shows meaningful alias names - The "safemode" feature has been removed. The major class of programmers it has been designed for (lowlevel bitbang programmers on parallel or serial ports) virtually doesn't exist anymore, and the fuse combination that was covered by it do not match the fuses of modern AVR devices anyway. - avrdude.conf is now being looked up in the location of the executable file first, before considering the configured default location; this eases a "portable use" where the entire suite is not installed into its configured default location. (Basically only relevant for unixoid systems; on Windows, this search order has been used for many years already.) * New devices supported: - ATtiny828, ATtiny87, ATtiny167, ATtiny48, ATtiny102, ATtiny104 - LGT8F88P, LGT8F168P, LGT8F328P (fixed names of these parts) - ATmeg164A, ATmega169A, ATmega169P, ATmega169PA, ATmega329A, ATmega329PA, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649A, ATmega649P, ATmega6490A, ATmega6490P, ATmega165, ATmega165A, ATmega165P, ATmega165PA, ATmega325A, ATmega325P, ATmega325PA, ATmega645A, ATmega645P, ATmega3250A, ATmega3250P, ATmega3250PA, ATmega6450A, ATmega6450P - ATmega48A/48PA/88A/88PA/168A/168PA, ATmega164A/644A/644PA, ATmega16A/32A/64A/128A, ATtiny13A, ATtiny24A/44A/84A, ATtiny261A/461A/861A, ATtiny828R, ATtiny2313A, ATtiny1634R - ATtiny3224, ATtiny3226 and ATtiny3227 - AVR16DD14/20/28/32, AVR32DD14/20/28/32 and AVR64DD14/20/28/32 - AVR8EA28/32, AVR16EA28/32/48, AVR32EA28/32/48 and AVR64EA28/32/64 - ATmega16U4 * New programmers supported: - SerialUPDI (UPDI devices connected to serial port with few passive parts) - PicKit4 / SNAP (now also in ISP and PDI mode) - Teensy bootloader (PR #802) - Micronucleus bootloader (PR #786) - ft232h (generic variant, PR #842) * Issues fixed: - Curiosity Nano and terminal mode #790 (only the actual bugs reported) - CMake doesn't correctly handle conditionals in avrdude.conf.in #776 - CMake doesn't detect FreeBSD's libusb-1.0 (compatibility) #775 - CMake doesn't correctly handle conditionals in avrdude.conf.in #776 - CMake: Recognize more than just bison #785 - [bug #26007] ATTiny167 not supported #150 - [bug #47375] ATtiny102/104 descriptions missing in configuration file #409 - No error message when connecting to a not-connected AVRISP mkII programmer #813 - [bug #53180] missing programmer or bad -P option argument doesn't result in error message #471 - ATmega328P reported as lgt8fx328p #812 - [bug #48004] Dead link for linuxgpio in avrdude description #419 - Segmentation fault when writing ATtiny104 fuse #823 - USBasp returns ERANGE for unknown error #848 - Compiler warnings #856 - Can't get serialupdi to work #874 - Rework HID support for Windows #881 - List of signing keys? #884 - Pickit4 UPDI is writing at offset 0x4000 into flash instead of 0x0000. #892 - SerialUPDI programmer can't write to usersig/userrow in terminal mode #889 - Signature read command for ATmega165* was wrong (no-id) - Cannot use non-standard baud rates for uploading on MacOS #771 - Wrong values in avrdude.conf #897 - AVR-Eclipse plugin broken by missing -u commandline option #890 - Timeout passed to hid_read_timeout() is too short for instances where the EDBG AVRISP 'Enter Programming Mode' command fails #900 - Terminal write mode doesn't support string input (yet) #913 - Terminal mode: memory fill with strings may cause Avrdude to crash. #922 - Some parts have wrong or missing ISP commands #915 * Pull requests: - GitHub Migration #765 - Update toplevel files. #767 - GitHub Migration part 2 #768 - Remove 'windows' folder with giveio.sys driver #769 - SerialUPDI implementation - release candidate 1 #772 - Fix typos #777 - Fix memory leaks #779 - As promised, documentation for SerialUPDI programmer #782 - Improve CMake project #783 - Fix avr_read() for page reads #784 - Serialupdi manpage #787 - Add PicKit4 and SNAP programmers #791 - Use yacc/byacc as an alternative to bison, closes #785 #793 - Derive program version string from last commit #794 - Find 'avrdude.conf' based on absolute path to executable #780 - buspirate: fix -Wtautological-constant-out-of-range-compare #796 - avrftdi: don't use the deprecated ftdi_usb_purge_buffers routine #792 - Ignore ctags index file #804 - term: fix memleakOnRealloc #806 - Add missing ATtiny targets to avrdude.conf #803 - Add support for Teensy bootloader #802 - Conffile clean up #801 - Fix typos all over the code #807 - Add MSVC builds and better WinUSB/FTDI support #798 - buspirate: fix invalidScanfArgType_int warning #808 - Ignore ac_cfg.h.in~ #810 - Notify open failure #814 - Print expected part #817 - pindefs: conform to the function declaration #818 - Add support for Micronucleus bootloader #786 - Remove ac_cfg.h from libavrdude.h #820 - CMake: enable dynamic-link library for libavrdude #826 - Fix for TPI fuse write (issue #823) #828 - Add missing ATmega__5 and ATmega__9 targets to avrdude.conf #809 - Add missing ATmega and ATtiny targets #832 - Added missing RTS/DTR management feature to serialupdi programmer #811 - Add missing tinyAVR-2, AVR DD and AVR EA targets #836 - Add a new programmer ft232h #842 - Reduce verbosity when setting fuses and uploading programs #845 - jtagmkii: Reduce the number of sync attempts to 10 + print number of attempts #844 - CMake: add initial support for installing lib and include files #829 - Add SPI support to USBtiny #816 - Add more memory sections to read from #815 - Add a build script for Unix-like systems #849 - Fix receive buffer implementation in ftdi_syncbb programmer #843 - CMake: split configuration in two files #852 - Set number of connection retry attempts for Arduino/STK500 programmer #854 - Fix libusb-1.0 error strings #850 - Assign proper type to msg[] in errstr() #857 - Fix Arduino retry attempts #855 - CMake: use CMAKE_CURRENT_BINARY_DIR to locate avrdude.conf #858 - Remove the "safemode" feature. #859 - Add support for reading from more memory sections #863 - Alias keyword #868 - Add fuse name aliases to avrdude.conf + tweak update.c #869 - Print JTAG3 clocks after configuration + string formatting #853 - Tweak programmer info formatting strings #872 - Remove libhid support in ser_avrdoper.c in favor of libhidapi #882 - Reduce jtag3 output verbosity #877 - Fix Curiosity Nano target voltage #878 - Smallest possible fix for PL2303HX #885 - Add missing USBtiny derived programmers #873 - Cleanup of POSIX serial init code #886 - Avrdude terminal write improvements #880 - Add userrow and usersig aliases #888 - For UPDI devices do not add offset when accessing flash. #895 - Support both userrow and usersig names #893 - Fix ugly terminal write bug #896 - Improve terminal read functionality #894 - Macos nonstandard baudrates #898 - Fix errors in Avrdude.conf #899 - Minor terminal write improvements #902 - Term docs #903 - Add progressbar for read and write command #912 - Add MacOS serial/parallel port note #908 - Add ATmega16U4 to avrdude.conf #910 - Mask out unused ATmega32U4 efuse bits #909 - Increased timeout passed to hid_read_timeout() #901 - Add terminal write string functionality #914 - Update documentation link to new URL #929 - Fix terminal write buffer overflow issue #924 * Internals: - Development moved to Github - Addition of "alias" keyword to avrdude.conf.in syntax; used for fuse name aliases right now Version 6.4: * Major changes compared to the previous version: - libhidapi support (part of patch #8717) - use libhidapi as (optional) transport for CMSIS-DAP compliant debuggers (JTAGICE3 with firmware 3+, AtmelICE, EDBG, mEDBG) - UPDI support added (AVR8X family) - TPI support for USBtinyISP - TPI support for ft245r - TPI support for linuxgpio - AVR Doper uses libhidapi rather than raw libusb (patch #9033) - -P net:host:port can use IPv6 now (Posix systems only) - New configure option: -disable-libusb_1_0 - extended UPDI device context (> 64 Ki flash) - major overhaul of ft245r driver (patch #9327/#9328) - some improvements in linuxspi driver - Use -B rather than -b for linuxspi driver - unused lock byte bits are not masked on read anymore - parport support disabled by default; configure with --enable-parport to explicitly enable it * New devices supported: - ATmega328PB - AVR8X family, ATtiny1617, ATtiny817, ATtiny202, ATtiny204, ATtiny402, ATtiny404, ATtiny406, ATtiny804, ATtiny806, ATtiny807, ATtiny1604, ATtiny1606, ATtiny1607, ATtiny212, ATtiny214, ATtiny412, ATTiny414, ATtiny416, ATtiny417, ATtiny814, ATtiny816, ATtiny1614, ATtiny1616, ATtiny3214, ATtiny3216, ATtiny3217, ATmega3208, ATmega3209, ATmega4808, ATmega4809 - ATtiny841, ATtiny441 - ATmega64M1 - ATmega324A - ATmega808, ATmega809, ATmega1608, ATmega1609, AVR DA, AVR DB - LGT8FX88P, LGT8FX168P, LGT8FX328P - ATmega324PB - ATmega8A * New programmers supported: - ehajo-isp (commercial version of USBtiny) - XplainedPro in UPDI mode - XplainedMini in UPDI mode - JTAGICE3 in UPDI mode - Atmel Powerdebugger in all modes (JTAG, PDI, UPDI, debugWIRE, ISP) - linuxspi (direct SPI bus e.g. on Raspberry Pi devices) - PICkit4, Snap, PKoB - iseavrprog - XBeeBoot * Bugfixes: bug #47550: Linux GPIO broken bug #47718: "lfuse reads as" not displayed in verbose mode - SOLUTION bug #48084: Avoid compiled-in timestamp for reproducible release builds bug #47376: ATtiny841 description missing in configuration file bug #49455: support for tiny441 bug #57428: document when 'arduino' or 'wiring' should be used, and -D requirement of latter bug #58095: error setting efuse on atmega328pb variant bug #51409: Can't program EFUSE on ATmega32M1 bug #60753: Patch #1436 breaks multiple programmer/device combinations on MacOS BigSur bug #59525: Bogus error message because Copy/Paste typo in stk500.c bug #58078: [PATCH] buspirate: remove compound literals (fixes GCC>=9) bug #57453: [PATCH] fix reference to nonexistant -m option by changing to -U bug #59227: Add new part. How does one get a part added to the CONF file? bug #55009: no efuses for m164a/pa bug #55734: USBtiny programming of ATmega328p broken by Patch #9278 bug #58495: Add atmega324pb support to avrdude.conf.in bug #60863: avrftdi programming error probably caused by multiple, consecutive empty pages bug #50517: Reading fails if "immediate mode" for output file format is selected - fileio: invalid operation=1 bug #50630: Erase Cycle Counter options ( -y -Y n ) should be removed from usage Message bug #48767: ser_drain() for TCP on Windows doesn't work bug #46759: avrdude 6.1 -> 6.2 regression: lock byte verification error bug #58440: linuxgpio PIN limit too low bug #55462: wrong programmer id check in jtag3_getsync() and jtag3_close() bug #58994: VPP PWM still enabled at the end of programming process bug #57338: if safemode has to change fuses avrdude should exit with non-zero exit code bug #60575: Permission denied on macOS Big Sur * Patches: patch #9482: Add support for UPDI and AVR8X patch #9508: Add PowerDebugger and XPlained Mini in UPDI mode patch #9507: Fix UPDI chip erase patch #9506: Script to create device configuration stub from Atmel ATDF files patch #9423: Support ATtiny841 and ATtiny441 patch #9530: Update URL to Ladyada's USBtinyISP page. patch #9317: Support atmega64m1 as part patch #9222: Enable silent build patch #8924: Enable TPI for usbtiny patch #9033: avrdoper backend uses libhidapi instead of libusb patch #8580: FT245r support to select device by serial number patch #8910: ATxmega32c4 and ATxmega16c4 have wrong signatures patch #8219: Fix boot_start for xmega devices on jtagmkII patch #9185: Add extended_param to usbasp.c - erasing patch #8311: Add IPv6 support to the -Pnet:host:port option patch #9542: Correct "usersig" on avr8x devices patch #8128: Added new option to configure.ac script patch #8444: Proposal for modifications in -B and -U command options managment (partially) patch #9735: spelling error fix: psuedo -> pseudo patch #9893: [PATCH] Reader reads ftdi handle after main thread close it patch #9819: Address several leaks in SVN rev 1429 patch #9820: Fix some out-of-bounds/uninitialized issues patch #9818: correct typos in SVN rev 1429 patch #9732: usbtiny_paged_load overflows buffer e.g. when reading EEPROM patch #9966: Add JTAGICE3 in UPDI mode patch #9963: UsbAsp 3 MHz patch for UsbAsp-flash firmware patch #9816: Implement new programmer type: linuxspi patch #9811: ATmega328pb has efuse bit 3 patch #9744: Patch for ATMega324A support patch #10000: Add support for extended UPDI device context patch #9697: Add iseavrprog support patch #10017: uspasp / tpi: Automatically clear configuration byte (fuse) before writing it patch #8957: Allow reading prodsig memory from stk500v2 on xmega devices patch #9110: Let reserved fuse bits to be read as *don't care* patch #9253: Fix for giving terminal_mode commands more than 20 arguments patch #9320: fix TPI RESET in bitbang.c patch #9079: Fix ftdi_syncbb teardown (supersedes #9893, superseded by #9328) patch #9122: Fixed MISO sampling in ftdi_syncbb patch #9123: ftdi_syncbb: use FT245R_CYCLES in ft245r_set_bitclock() patch #8719: Support Over-the-Air bootloading with XBeeBoot patch #9757: Fix ATtiny817 Xplained Mini programmer patch #9327: ft245r.c: add TPI support (patches 1-4) patch #9328: ft245r.c: add TPI support (patches 5-7) patch #10027: linuxspi: Add reset pulse, according to AVR programming algorithm patch #10028: linuxspi: close() only when necessary patch #10029: linuxspi: Report GPIO_GET_LINEHANDLE_IOCTL errors patch #10030: linuxspi: Support inverted GPIO pin patch #10031: linuxspi: Support GPIO uAPI v2 (no-id): Improve documentation of linuxspi driver, provide portname default (no-id): Use -B rather than -b for linuxspi driver patch #9304: [Bug #48767] Implemented WinSock variation of "ser_drain(...)" functionality patch #8996: Remove lock byte read mask (bug#21954, bug#46759) patch #8923: Enable TPI for linuxgpio patch #10153: linuxspi: Support "-E reset" and "-E noreset" * Internals: - New avrdude.conf keyword "family_id", used to verify SIB attributes on AVR8X architecture if device is locked. Version 6.3: * Major changes compared to the previous version: - Backout of patch #8380: adds 500k 1M 2M baud to ser_posix.c It broke the functionality in too many situations (bug #46610/46483) * New devices supported: - ATmega48PB, ATmega88PB, ATmega168PB - ATtiny28 (HVPP-only device) * New programmers supported: - Atmel mEDBG: xplainedmini, xplainedmini_dw * Bugfixes - bug #46610: Floating point exception (core dumped) arch linux rpi2 - bug #46483: version 6.2. ser_open(): can't set attributes for device - patch #8435: Implementing mEDBG CMSIS-DAP protocol - patch #8735: ATtiny28 support in avrdude.conf - patch #8896: Silence cppcheck warnings in 6.2 code - patch #8895: Spelling in 6.2 code Version 6.2: * Major changes compared to the previous version: - The stk500v2 implementation now uses its own higher-level command implementation for byte-wide access, rather than the historic SPI_MULTI command where all the low-level ISP implementation had to be assembled manually inside AVRDUDE. In addition to the traditional STK500, this implementation is also used by all the more modern Atmel tools (AVRISPmkII, JTAGICEmkII in ISP mode, STK600 in ISP mode). - The -B option can be suffixed with "Hz", "kHz", or "MHz", in order to specify a bitclock frequency rather than period. - Print part id after signature (patch #8440 ) - buspirate: Also support "cpufreq" extended parameter in binary mode (patch #8504 ) - The "-P net:" syntax (forwarding of serial data over TCP) is now also implemented for Win32 systems. - Allow for arbitrary serial baudrates under Linux (OSX and *BSD could already handle it). * New devices supported: - AT90PWM216 (bug #42310: New part description for AT90PWM216) - ATmega32M1 (patch #7694 Add support for the atmega32m1) * New programmers supported: - ftdi_syncbb + uncompatino, ttl232r (FTDI TTL232R-5V with ICSP adapter) (patch #8529 2 more ftdi_syncbb devices) * Bugfixes - bug #45727: Wrong atmega8u2 flash parameters - bug #46020: Add TIAO TUMPA to the conf file. - bug #46021: Please add read in the memory lock section of ATtiny85 - bug #42337 avrdude.conf updates for UM232H/CM232H - bug #42056: double free or corruption triggered at exit - bug #42158: Linux GPIO - Source Typo - bug #42516 spelling-error-in-binary - patch #8419 fix ftdi_syncbb hang with libftdi 1 - bug #43002 usbasp debug output typo - patch #8511 Fix reset on FT245R - bug #40142 Floating point exception on Ubuntu 10.04 - bug #22248: Read efuse error (partial fix) - bug #42267: jtag3isp fails to read lock and fuse bytes directly after changing lock byte - bug #41561: AVRDUDE 6.0.1/USBasp doesn't write first bytes of flash page - bug #43078: AVRDUDE crashes after sucessfully reading/writing eeprom - bug #43137: Writing and reading incorrect pages when using jtagicemkI - bug #40870: config nitpick: ATtiny25/45/85 have 1 calibration byte not 2 - bug #42908: no external reset at JTAGICE3 - patch #8437: [PATCH] Serial-over-ethernet for Win32 - bug #44717: avrdude creates empty flash dump * Internals: - Removing exit calls from config parser - bug #42662 clang warnings under FreeBSD 10.x Version 6.1: * Major changes compared to the previous version: - Atmel EDBG protocol support added (JTAGICE3, XplainedPro, Atmel-ICE) * New programmers supported: - Atmel DFU, using FLIP protocol version 1 (AT90USB and ATmega*U* devices), or version 2 (Xmega devices) - Atmel-ICE (ARM/AVR), JTAG, PDI, debugWIRE, ISP modi * Bugfixes - bug #40055: AVRDUDE segfaults when writing eeprom - bug #40085: Typo fix in fuses report (for 6.1-svn-20130917) - bug #40782: Verify errors for object size > 16 k on x32e5 due to typo in avrdude.conf - bug #40817: Elf file support (possibly) not working on 6.0.1 windows build - bug #40897: AT Mega2560 not correctly programmed with stk500(v1) ISP (solution patch) - bug #41357: OS X: Avrdude messes with the usb stack? - bug #41402: dfu.c missing include - patch #7896: DFU FLIPv2 programming support - patch #XXXX: xxx * Internals: - (Some) programmers can take a list of USB PIDs now. Version 6.0: * Major changes compared to the previous version: - Programmer types in configuration file are no longer keywords but specified as string. So you need to change 'type = XYZ;' to 'type = "XYZ";' in own config files. (internal: The parser does not need to know all programmer types now, new programmers will update only the table in pgm_type.c.) - The erase cycle counter (formerly options -y / -Y) has been removed. - Specifying a -U option without a memory type (short form of option argument list) now defaults to "application" memory for Xmega devices, and "flash" for everything else. This ensures the Xmega bootloader is not accidentally touched. - For programmers that support it, the default erase method is a page erase now, rather than a chip erase (Xmega only). - Keep track of input file contents Memory segments are being tracked to remember whether they've been actually read from a file. Only segments that came from a file are being programmed into the device, or considered for verification. This drastically improves handling speed for sparse files (e.g. files that have a second bootloader segment), and it ensures the device contents is actually compared for everything mentioned in the file (even in case the file has large 0xFF blocks). - The -U option now accepts ELF files as input files, and extracts the appropriate section contents that matches the requested memory region. To enable this feature, the host system used for the compilation must have a libelf around, including the respective header files (i.e., package "libelf-devel" on many Linux systems). - Programmers and parts lists They are now sorted at output with '-c ?'/'-p ?'. (patch #7671: Sorting programmers and parts lists for console output) Programmers and parts lists in documentation generated from lists mentioned above. (patch #7687: Autogenerating programmers and parts lists for docs) Output list of programmer types with '-c ?type', add list to documentation - Configuration files now accepts parent parts/programmers, parts starting with '.' (eg. .xmega) are not included in output parts list and can be used as abstract parents (bug #34302: Feature request : device configuration with parent classes) (patch #7688: Implement parent programmers feature) - Additional config files which are read after default can be specified on command line using '-C +filename' (patch #7699 Read additional config files) - "Safemode" can now be turned off by default from within a configuration file (like ~/.avrduderc). - The new option -l logfile allows to redirect diagnostic messages to a logfile rather than stderr. Useful to record debugging traces, in particular in environments which do not offer shell-style redirection functionality for standard streams. - When leaving debugWIRE mode, immediately retry with ISP rather than bailing out completely. - The USBasp programmer implementation now supports detailed traces with -vvv, and device communication traces with -vvvv. - The "verbose" terminal mode command allows to query or modify the verbosity level. * New devices supported: - ATmega48P (patch #7629 add support for atmega48p) - AT90PWM316 (bug #21797: AT90PWM316: New part description) - ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4 - ATmega256RFR2, ATmega128RFR2, ATmega64RFR2, ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2 - ATtiny1634 - ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega16A4U, ATxmega16C4, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4U, ATxmega32C4, ATxmega384C3, ATxmega384D3, ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3 - ATtiny43U - ATmega406 - ATxmega8E5, ATxmega16E5, ATxmega32E5 - ATtiny20, ATtiny40 * New programmers supported: - linuxgpio + any (embedded) Linux system with 4 GPIOs available can be used as a programmer with little or no additional hardware. - avrftdi + o-link (patch #7672 adding support for O-Link (FTDI based JTAG) as programmer) + 4232h (patch #7715 FT4232H support) - TPI support + openmoko (bug #37977 Support for Openmoko Debug Board) - usbasp + nibobee (previously specified as '-c usbasp -P nibobee) + usbasp-clone (same as usbasp but ignores vendor and product string, checks only vid/pid) - ftdi_syncbb (new type for synchronous bitbanging with ft232r/ft245r) + ft245r (FT245R Synchronous BitBang, miso = D1, sck = D0, mosi = D2, reset = D4) + ft232r (FT232R Synchronous BitBang, miso = RxD, sck = RTS, mosi = TxD, reset = DTR) + bwmega (BitWizard ftdi_atmega builtin programmer, miso = DSR, sck = DCD, mosi = CTS, reset = RI) + arduino-ft232r (Arduino: FT232R connected to ISP, miso = CTS X3(1), sck = DSR X3(2), mosi = DCD X3(3), reset = RI X3(4)) + diecimila (alias for arduino-ft232r) - pickit2 - Atmel JTAGICE3 - buspirate_bb (TPI programming using the BusPirate in bitbang mode) * Bugfixes - bug #34027: avrdude AT90S1200 Problem - bug #34518: loading intel hex files > 64k using record-type 4 - patch #7667: Minor memory handling fixes - patch #7680: Fixing timeout problem in ser_recv in ser_win32.c - patch #7693: Fix config file atmel URLs (+ URLs in avrdude.texi and avrpart.h) - bug #21663: AT90PWM efuse incorrect, bug #30438: efuse bits written as 0 on at90pwmxx parts - bug #35261: avrftdi uses wrong interface in avrftdi_paged_(write|load) - patch #7437 modifications to Bus Pirate module - patch #7686 Updating buspirate ascii mode to current firmware, use AUX as clock generator, and setting of serial receive timeout - bug #34768 Proposition: Change the name of the AVR32 devices - patch #7718: Merge global data of avrftdi in a private data structure - bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly - bug #34518: loading intel hex files > 64k using record-type 4 (Extended Linear Address Record) - bug #34027: avrdude AT90S1200 Problem - bug #30451: Accessing some Xmega memory sections gives not supported error - bug #28744: Can't load bootloader to xmega128a1 - bug #29019: pagel/bs2 warning when uploading using stk500 to xmega - bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't read device signature - bug #37265: wrong page sizes for XMega64xx in avrdude.conf - bug #37942: Latest SVN can't program in dragon_jtag mode - patch #7876 JTAGICE mkII fails to connect to attiny if debugwire is enabled AND target has a very slow clock - bug #39893: Verification failure with AVRISPmkII and Xmega - bug #38713: Compilation of the documentation breaks with texinfo-5 - bug #38023: avrdude doesn't return an error code when attempting to upload an invalid Intel HEX file - bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 - bug #35800: Compilation error on certain systems if parport is disabled - bug #38307: Can't write usersig of an xmega256a3 - bug #38580: Current svn head, xmega and fuses, all fuses tied to fuse0 - bug #39691: Buffer overrun when reading EEPROM byte with JTAGICE3 - bug #38951: AVR109 use byte offset instead of word offset - patch #7769: Write flash fails for AVR910 programmers - bug #38732: Support for ATtiny1634 - bug #36901: flashing Atmega32U4 EEPROM produces garbage on chip - bug #28344: chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P - bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly) - bug #35456: The progress bar for STK500V2 programmer is "wrong". - patch #5708: avrdude should make 10 synchronization attempts instead of just one - patch #7606: ATtiny43u support - patch #7657: Add ATmega406 support for avrdude using DRAGON + JTAG - bug #35474: Feature request: print fuse values in safemode output. - patch #7710: usb_libusb: Check VID/PID before opening device - [no-id]: Fix SCK period adjustment for STK500v2 - bug #40040: Support for ATtiny20 and ATtiny40 * Internals: - Restructuring and compacting programmer definition part of grammar for config file. - Cleanup of parser code, removing unused definitions/ functions. Using yylex_destroy if available. - Fixed some more memory leaks, added cleanup code at program exit (to minimize the number of non-freed memory blocks reported by valgrind) - Fixed some findings reported by cppcheck. Version 5.11: * New devices supported: - ATmega88P/168P - ATmega8U2/16U2/32U2 - ATtiny4313 * New programmers supported: - TPI programming through bitbang programmers (both, serial and parallel ones) - FT2232 (and relatives) based programmers (MPSSE bitbang mode) - Wiring environment (http://wiring.org.co/) - butterfly-style bootloader of the Mikrokopter.de device * Bugfixes Version 5.10: * Bugfixes - bug #28660: Problem with loading intel hex rom files that exceed 0x10000 bytes - see ChangeLog for further details * New Features - (JTAG ICE / AVR Dragon) apply external reset if JTAG ID could not be read Version 5.9: * New devices supported: - AVR32A0512 (JTAGMKII only) - ATmega32U4 - ATtiny4 - ATtiny5 - ATtiny9 - ATtiny10 * New programmers supported: - BusPirate - Arduino - JTAGICEmkII and AVR Dragon in PDI mode (ATxmega devices) - STK600 and AVRISP mkII in TPI mode (ATtiny4/5/9/10) * Bugfixes - see ChangeLog and ChangeLog-2009 for details Version 5.8: * Bugfixes; most importantly, fix a serious memory corruption for that JTAG ICE mkII and AVR Dragon in ISP/HVSP/PP mode. Version 5.7: * New devices supported: - ATXMEGA64A1 - ATXMEGA192A1 - ATXMEGA256A1 - ATXMEGA64A3 - ATXMEGA128A3 - ATXMEGA192A3 - ATXMEGA256A3 - ATXMEGA256A3B - ATXMEGA16A4 - ATXMEGA32A4 - ATXMEGA64A4 - ATXMEGA128A4 * Major Xmega fixes for the JTAG ICE mkII (patch #6825) * Bugfixes. Version 5.6: * New devices supported: - AT90USB82 - AT90USB162 - ATtiny88 - ATmega328P - ATmega1284P - ATmega128RFA1 - ATxmega128A1 rev D - ATxmega128A1 - ATxmega256A3 * New programmers supported: - AT89ISP cable (patch #6069) - Arduino * Add support for the -x option to pass extended parameters to the programmer backend. * Add support for JTAG daisy-chains, using the -x daisychain= option. * Add support for the Atmel STK600 for "classic" AVRs (AT90, ATtiny, ATmega), using either ISP or high-voltage programming modes. * Add support for the -x devcode extended parameter to the avr910 programmer, to allow overriding the device code sent to the programmer. * Add support for the Crossbow MIB510 programmer (patch #6074, #6542). * Add support to bootstrap with GNU autoconf 2.61, and automake 1.10, respectively. * Add support for ATxmega128A1 (including the revision D engineering samples) for STK600 and AVRISPmkII tools using PDI * The option combination -tF now enters terminal mode even if the device initialization failed, so the user can modify programmer parameters (like Vtarget). * Add preliminary support for ATxmega128A1 for the JTAG ICE mkII using JTAG. * Add support for direct SPI transfers (bug #25156). * Bugfixes. Version 5.5: * Add support for the USBtinyISP programmer (patch #6233) * Add support for the C2N232I serial bitbang programmer (patch #6121) * Bugfixes. Version 5.4: * New devices supported: - AT90PWM2B/AT90PWM3B * Bugfixes. * Source code rearranged so that the functionality is now built into a libavrdude.a library where main.c is currently the only existing frontend. * Implement ATmega256x support for butterfly/avr109. Version 5.3.1: * Add support for the AVR Dragon (all modes: ISP, JTAG, HVSP, PP, debugWire). * Add support for debugWire (both, JTAG ICE mkII, and AVR Dragon). * Add support for the AVR Doper USB HID-class programmer. * Bugfixes. Version 5.2: * New devices supported: - AT90USB646/647/1286/1287 - ATmega2560/2561 - ATmega325/3250/645/6450 - ATtiny11 (HVSP only device) - ATtiny261/461/861 * Fixed paged flash write operations for AT90PWMx devices (error in datasheet). * Add signature verification. * Add high-voltage mode programming for the STK500 (both, parallel, and high-voltage serial programming). * Add support for using the JTAG ICE mkII as a generic ISP programmer. * Allow for specifying the ISP clock delay as an option for bit-bang programming adapters. * Add support for Thomas Fischl's USBasp low-cost USB-attached programmer. * The "stk500" programmer type is now implemented as a stub that tries to probe for either "stk500v1" or "stk500v2". * Many bugfixes. Version 5.1: * New devices supported: - ATmega640/1280/1281 - ATtiny24/44/84 * JTAG mkII support now works with libusb-win32, too * JTAG ICE mkI support has been added * Solaris support has been added (including ecpp(7D) parallel-port bit-bang mode) Version 5.0: * Support for JTAGICE MkII device * Support for STK500 Version 2 Protocol * New devices supported: - AT90CAN128 - ATmega329x/649x - ATmega164/324/644 - AT90PWM2/3, - ATmega164/324/644 - ATmega329x/649x - ATtiny25/45/85 * Support for serial bit-bang adapters: Ponyprog serial, UISP DASA, UISP DASA3. * DAPA programmer pinout supported * New "safemode" feature where fuse bits are verified before exit and if possible recovered if they have changed. This is intended to protect against changed fuses which were not requested which is reported to sometimes happen due to improper power supply or other reasons. * Various fixes for avr910 and butterfly programmers * Full support for AVR109 boot loaders (butterfly) * Adding -q -q suppresses most terminal output Version 4.4.0: * Native Win32 support: The windows build doesn't need Cygwin anymore. Additionally, the delay timing on windows should be more accurate now. Contributed by Martin Thomas * Add support for - ATmega48, ATmega88 (contributed by Galen Seitz) - ATtiny2313 (contributed by Bob Paddock) - ATtiny13 (contributed by Pawel Moll) * Added command to change the SCK of STK500-programmers. Now it is possible to program uC with slow oscillator. Contributed by Galen Seitz * Baudrate for serial programmers (STK500 and AVR910) is configurable in the config or at the command-line. This way some more tweaked bootloaders and programmers can be used. * Deprecated options have been removed. Now the "-U" option must be used. * MacOS X now supported by default. Version 4.3.0: * Added support for "Butterfly" evaluation board. * Make cycle-count work with AVR910-programmers. * Added "Troubleshooting"-Appendix to the manual. * Add ATmega8515 support. Contributed by: Matthias Weißer * Add ATmega64 support. Contributed by: Erik Christiansen * Improved polling algorithm to speed up programming of byte oriented parallel programmers. Contributed by: Jan-Hinnerk Reichert * Add "fuse" and "lock" definitions for the AT90S8535. * STK500 skips empty pages in paged write resulting in faster downloads when there are empty blocks in between code (such as files that contain application code and bootloader code). Version 4.2.0: * Add basic support for reading and writing fuses via SPI with avr910 programmers. Submitted by Jan-Hinnerk Reichert . * Perform an auto erase before programming if the flash memory is anywhere specified to be written by any of the -U requests. Old style memory specification options (-f, -i, -I, -m, and -o) are deprecated in favor of the new -U options. Auto erase is disabled if any of the old-style options (specifically -i and -o) are specified. * Add new -U option for specifying programming operations - allows multiple memory operations on a single command line. * New progress reporting, looks nicer and is nicer to wrapper environments such as emacs. * Fix long-standing timing (verify) problems on Windows platform. Submitted by Alex Shepherd . * Add new file format option - 'm' for "immediate mode." In this case, the filename argument of the -o, -i, or -U options is treated as the data for uploading - useful for specifying fuse bits without having to create a single-byte file for uploading. * Add support for displaying and setting the various STK500 operational parameters (Vtarget, Varef, Master clock). * Add 'picoweb' programming cable programmer. Contributed by Rune Christensen . * Add support for the sp12 programmer. Submitted by Larry Barello . Version 4.1.0 * Add support for the Bascom SAMPLE programmer. Submitted by Larry Barello . * Add support for avr910 type programmers (mcu00100, pavr avr910, etc). * Support new devices: ATmega8535, ATtiny26 Version 4.0.0 * Now support Linux - added by "Theodore A. Roth" . * Now support Windows - added by "Eric B. Weddington" . * Use 'configure' scripts to tailor the code to the system avrdude is getting ready to be compiled on - added by "Theodore A. Roth" . * Motorola S-Record support - submitted by "Alexey V.Levdikov " . * Support parallel programming on the STK500. Introduce 'pagel' and 'bs2' keywords to the config file for this purpose. * Add support for the AT90S2343 * Add support for the ATmega169 * Add ability to specify system defaults within the config file (default parallel port, default serial port). * Specify the default programmer seperately from the programmer definition. This is now done in the config file using the 'default_programmer' keyword. * Support a per-user config file (~/.avrduderc) so that one can override system wide defaults if desired. * Follow the datasheet more closely for several parts in the "retry" code when entering programming mode fails initially. Introduce 'retry_pulse' to the config file for this purpose. Version 3.1.0 * This change represents a name change only. There is currently an effort to port AVRPROG to other platforms including Linux and Windows. Since Atmel's programmer binary that's included within their AVR Studio software is named AVRPROG.EXE on the Windows OS, there is the chance for confusion if we keep calling this program AVRPROG as well. Up until now the name hasn't really been a problem since there was no chance to confuse 'avrprog' on Unix with Atmel's AVRPROG because Atmel's tools only run on Windows. But with the Unix 'avrprog' possibly being ported to Windows, I felt a name change was the best way to avoid problems. So - from this point forward, my FreeBSD Unix program formerly known as AVRPROG will subsequently be known as AVRDUDE (AVR Downloader/UploaDEr). This change also represents a time when the AVRDUDE sources move from my own private repository to a public repository. This will give other developers a chance to port AVRDUDE to other platforms and extend its functionality to support additional programming hardware, etc. So goodbye AVRPROG, welcome AVRDUDE! Version 3.0.0 * Rewrite parts of the code to make it easy to support other types of programmers besides the directly connected parallel port programmer (PPI). * Add support for Atmel's STK500 programmer/development board. The STK500's "paged mode" read/write is supported which makes this programmer very fast. This is sorely needed on parts with large memories such as the ATmega128. My 12K test program burns in about 5 seconds, add another 5 to read it back out for verification. Version 2.1.5: * When getting ready to initiate communications with the AVR device, first pull /RESET low for a short period of time before enabling the buffer chip. This sequence allows the AVR to be reset before the buffer is enabled to avoid a short period of time where the AVR may be driving the programming lines at the same time the programmer tries to. Of course, if a buffer is being used, then the /RESET line from the programmer needs to be directly connected to the AVR /RESET line and not via the buffer chip. Feature contributed by Rick C. Petty . * When in interactive terminal mode and dumping memory using the 'dump ' command without any address information, and the end of memory is reached, wrap back around to zero on the next invocation. Version 2.1.4: * Fix -Y option. Version 2.1.3: * Be backward compatible when reading 2-byte rewrite cycle counters as written by avrprog version 2.1.0. Version 2.1.1 changed over to a 4-byte counter, which caused avrprog versions 2.1.1 and 2.1.2 to report a negative count for parts that were initialized using version 2.1.0. Thanks to Joerg Wunsch for noticing this. Version 2.1.2: * Add '-V' option to disable automatic verify check with uploading data. Version 2.1.1: * Fix ATmega128 instruction sequences for reading fuse bits - contributed by Joerg Wunsch. * Modify erase-rewrite cycle counter code to use a 4 byte counter instead of a two byte counter. Version 2.1.0: * Implement a per-part erase-rewrite cycle counter; requires the use of two bytes of EEPROM memory. Version 2.0.5: * Support for ATtiny15 - contributed by Asher Hoskins Version 2.0.4: * Config file fixes for various parts. Version 2.0.3: * Work around problem programming fuse bits on parts like the at90s4433 as described in the following errata: http://www.atmel.com/atmel/acrobat/doc1280.pdf * Add part definition for at90s4414, at90s4433. * Add fuse/lock bit memory instructions for the at90s1200, at90s2333, at90s4433 and at90s8515. * Fix setting of programmer status LEDs under certain write-fail conditions. Version 2.0.2 : * Fix writing to read-only memories such as the lock bits of the AT90S2313. * Copyright updates. Version 2.0.1 : * Use correct parallel port pins for VCC. * Add programmer definition for Atmel's STK200. * Add programmer definition for the AVR3 board. * Fix address bit encoding for many parts. * Allow the ``BUFF'' signal to be asserted by multiple pins of the parallel port (like VCC) instead of just one. The STK200 appears to need this feature. Version 2.0.0 : * Add support for programming fuse and lock bits if supported by the part. * Move instruction encoding into the config file. Now any part can be supported as long as it uses the same basic serial programming instruction format. * Add part definitions for the ATMega163 and ATMega8 devices. Version 1.4.3 : * Mostly internal code cleanup. Version 1.4.2 : * Fixes for ATMega paged memory support. * Support for ATMega16 device. Version 1.4.1 : * No functional changes, update to Copyrights only. Version 1.4.0 : * Add part definitions to the config file. * Add initial support for Atmel's ATMega paged memory parts. * Config file documentation added. * Add a definition for the Dontronics DT006 programmer. * Fix Intel Hex support for addresses larger than 64k. Version 1.3.0 : * Make programmer pin assignments configurable. Version 1.2.2 : * Initial public release.