2010-01-15 Joerg Wunsch * jtagmkII.c: If entering JTAG mode fails with a bad JTAG ID message, retry with external reset applied (in case the target is in sleep mode or has asserted the JTD bit). 2010-01-15 Joerg Wunsch Submitted by Aurelien Jarno: * configure.ac: Fix build for GNU/kFreeBSD, fix FreeBSD default serial port name. * ppi.c: Fix build for GNU/kFreeBSD. * par.c: (Dito.) 2010-01-15 Joerg Wunsch * configure.ac: Bump version for post-5.8. 2010-01-15 Joerg Wunsch * configure.ac: Bump version for release 5.8. 2010-01-15 Joerg Wunsch Submitted by Soren Jorvang: bug #28611: -i delay not being applied to all serial port bit banging state transitions * serbb_win32.c: Apply ispdelay everywhere. * serbb_posix.c: (Dito.) 2010-01-15 Joerg Wunsch * stk500v2_private.h: Implement TPI mode for AVRISPmkII/STK600 * config_gram.y: (Dito.) * avrpart.h: (Dito.) * stk500v2.c: (Dito.) * main.c: (Dito.) * lexer.l: (Dito.) * avrdude.conf.in: Add ATtiny4/5/9/10 * avrdude.1: Document TPI and new device support. * doc/avrdude.texi: (Dito.) 2010-01-14 Joerg Wunsch Submitted by clint fisher: patch #7038: Adding Atmega32U4 Device to avrdude.conf.in * avrdude.conf.in (atmega32u4): New device. * avrdude.1: Document the new device support. * doc/avrdude.texi: (Dito.) 2010-01-14 Joerg Wunsch Submitted by Thomas Pircher: patch #6927: Documentation patches * doc/avrdude.texi: Fix various typos, and remove the last remnants of obsoleted options -i/-o/-m/-f. * avrdude.1: Merge typo fixes from avrdude.texi where applicable. 2010-01-14 Joerg Wunsch * avrdude.1: Update documentation to match the reality (device support, memory areas). * doc/avrdude.texi: Update documentation to match the reality (device support, programmer support, memory areas). Merge buspirate-specific comments from avrdude.1. * jtagmkII.c: Add some firmware feature checks. 2010-01-13 Joerg Wunsch * jtagmkII.c: Implement PDI mode support for the JTAG ICE mkII and the AVR Dragon. * jtagmkII.h: (Dito.) * config_gram.y: (Dito.) * jtagmkII_private.h: (Dito.) * avrdude.conf.in: (Dito.) * lexer.l: (Dito.) 2010-01-13 Joerg Wunsch * stk500v2.c: Update STK600 routing and socket card data from XML file. 2010-01-13 Joerg Wunsch * stk500v2.c: Cleanup the open/close handling to avoid accessing unallocated memory (in the atexit handler) in case of bailing out. * main.c: (Ditto.) 2010-01-13 Joerg Wunsch * jtagmkII.c: Stylistic changes: move #defines out into jtagmkII_private.h, drop all #if 0 blocks, fold overly long lines, move the *_initpgm() functions to the end of the file; while being here, remove all trailing whitespace. * jtagmkII_private.h: move AVR32 #defines here. 2010-01-12 Joerg Wunsch * bootstrap: autoconf 2.62 works well. 2010-01-12 Joerg Wunsch Various fixes for Xmega devices. * avrdude.conf.in: Correctly declare EEPROM page sizes for all Xmega devices (0x20 instead of 0x100). * avr.c: If a memory region has a page size declared, try using the paged IO routines regardless of the target memory name. Xmega EEPROM requires to be written in paged mode. Correctly use a long (rather than unsigned long) variable to evaluate the success status of the paged mode write attempt. * stk500v2.c: Don't apply TIF space offsets twice (bug #27995: AVRDUDE 5.8svn fails to program and read XMEGA); use stk500v2_loadaddr() prior to paged mode (EEPROM and flash) writes, otherwise programming of flash areas will fail; while being there, check the return value of stk500v2_loadaddr() everywhere; use the correct write/erase mode bits (same as AVR Studio does). 2010-01-12 Michal Ludvig * buspirate.c: Initialise firmware version to v0.0 prior to parsing the buspirate banner. 2010-01-11 Joerg Wunsch Clean-up the Xmega erase functions. * jtagmkII_private.h: Add CMND_XMEGA_ERASE as well as the various XMEGA_ERASE_* definitions (from updated appnote AVR067) * jtagmkII.c (jtagmkII_chip_erase): Correctly implement Xmega chip erase based on CMND_XMEGA_ERASE. After erasing an Xmega part, do *not* reinitialize the world, as a subsequent programming operation will fail (for unknown reasons). Actually, this was really only required for ancient AVRs, but doesn't hurt on mega and tiny devices. * jtagmkII.c (jtagmkII_pre_write): Remove, this turned out to be just a chip erase. * jtagmkII.c (jtagmkII_program_disable): Don't try reading "hfuse" for Xmega parts; they don't have it. * main.c (main): Re-enable auto-erase. It's been done before (as "jtagmkII_pre_write") in jtagmkII_paged_write() anyway. Xmega boot and application flash areas should be handled separately in the future, so auto_erase can only affect the area just being programmed. 2010-01-11 Joerg Wunsch * main.c (main): disable safemode for Xmega parts. 2010-01-12 Michal Ludvig * buspirate.c: If the BusPirate doesn't respond to a standard a reset command assume it was in binmode and attempt to exit to text mode first. 2010-01-08 Joerg Wunsch * bitbang.c: Fix Win32 build error: move freq up to the file level. * buspirate.c: Fix Win32 build warning: include to to get a declaration for alloca(). 2010-01-08 Thomas Fischl bug #28520: Programming with USBasp with low clock speed fails * usbasp.c: Change blocksize depending on sck frequency to avoid usb transmition timeouts. 2010-01-08 Joerg Wunsch bug #27505: serbb_posix does not cope with inverted pins * serbb_posix (serbb_highpulsepin): apply PIN_MASK when checking pin numbers. * serbb_win32 (serbb_highpulsepin): (Dito.) 2010-01-08 Joerg Wunsch bug #28516: Linux/Dragon: Error message on exit * stk500v2.c: Fix the "bad response to GO command: RSP_ILLEGAL_EMULATOR_MODE" message. jtagmkII_close() has been called with the wrong pgm->cookie. Wrap it inside stk500v2_jtagmkII_close(), adjusting the cookie data appropriately. 2010-01-08 Joerg Wunsch Submitted by Doug: patch #7010: Win32 enhanced bitbang_delay * bitbang.c (bitbang_calibrate_delay, bitbang_delay): On Win32, use the high-resolution performance counter rather than the uneducated delay loop guess if it is available on the target hardware. 2010-01-08 Joerg Wunsch Submitted by Gerard: patch #6828: Using arbitrary BAUD rates * ser_posix.c (serial_baud_lookup): Allow non-standard baud rates. * ser_win32.c (serial_baud_lookup): (Dito.) 2010-01-07 Joerg Wunsch Submitted by Eric Trein: bug #27596: AT90s2333 is not correctly supported in avrdude.conf * avrdude.conf.in (at90s2333): add various STK500v2 parameters. 2010-01-07 Joerg Wunsch Submitted by Gyorgy Szekely: bug #28458: Buffer line is incorrectly released for PP programmers * par.c (par_close): use par_setmany() rather than par_setpin() for PPI_AVR_BUFF. 2010-01-07 Joerg Wunsch Submitted by Lukasz Goralczyk: bug #27507: SIGSEGV when using avrdragon (avrdude 5.8) * stk500v2.c (stk500v2_dragon_isp_initpgm): Use stk500v2_jtagmkII_setup/stk500v2_jtagmkII_rather than their jtagII counterparts, to get the private data properly initialized. 2010-01-07 Joerg Wunsch * buspirate.c: Cosmetics: remove UTF-8 dashes, adjust for 8-column hard tabs. 2010-01-07 Joerg Wunsch * buspirate.c: add $ Id $ line. * buspirate.h: add $ Id $ line. 2010-01-07 Joerg Wunsch Fix a few warnings that came up recently (some of them only triggered by recent GCC versions). * config_gram.y (parse_cmdbits): "brkt possibly used uninitialized" (GCC errs here) * jtagmkII.c (jtagmkII_reset32): "status possibly used uninitialized" (I think GCC errs, too) * buspirate.c: "pointers differ in signedness" (mismatch between string processing and the use of "unsigned char" throughought the AVRDUDE API) 2010-01-01 Joerg Wunsch * jtagmkII.c (jtagmkII_smc_init32): replace sleep() by usleep() for win32 compatibility.