2004-07-04 Jan-Hinnerk Reichert * avrdude.conf.in: Added support for ATtiny2313 (contributed by Bob Paddock) 2004-06-25 Joerg Wunsch * avrdude.conf.in: Fix efuse bits for ATmega169. 2004-04-17 Jan-Hinnerk Reichert * avrdude.conf.in: Added support for - tiny13 (contributed by Pawel Moll) - mega48 and mega88 (contributed by Galen Seitz) However, the STK500-code for mega8 remains unchanged. 2004/05/19 Brian S. Dean * main.c: * stk500.c: Allow the baud rate to be specified on the command line with a new -b switch. The specified baud rate will override the default serial port baud rate for a particular programmer. 2004/05/19 Brian S. Dean * ppi.c: Stub-out the ppi_* functions in ppi.c with empty wrappers that simply return an error code in order to build successfully on MacOS X. This allows avrdude to work on MacOS X and was tested using a USB<->RS232 cable adapter, specifically Keyspan model USA-19HS. 2004-04-23 Joerg Wunsch * lists.h, lists.c: Drop LISTSZ and the check for it in lcreat(). 2004-04-17 Jan-Hinnerk Reichert * avr910.c: Hopefully fixed that weird "first byte not programmed"-error in a good way (previous fix was not working with all firmwares) 2004-02-10 Jan-Hinnerk Reichert * avrdude.1, doc/avrdude.texi, doc/TODO: Removed the deprecated options from documentation 2004-02-10 Jan-Hinnerk Reichert * main.c: Removed deprecated options. 2004-01-28 Jan-Hinnerk Reichert * pgm.c, main.c, avr910.c, butterfly.c, stk500.c: Changed default for powerup, powerdown and LED-commands to do nothing and return OK. Then removed these commands from avr910, butterfly and stk500. * pgm.c: Fixed wrong type for default_open introduced by the cleanup yesterday. 2004-01-29 Jan-Hinnerk Reichert * par.c: changed order of port-read/writes in par_txrx(). This change should increase immunity to delays in the programmer-hardware. Also did some unrelated cleanup in par_txrx(). 2004-01-28 Jan-Hinnerk Reichert * pgm.[ch], main.c, par.c, avr910.c, butterfly.c, stk500.c: Move save/restore-functionality into open/close. * par.c: open/close now saves/restores PPICTRL, too. * TODO: exitspecs don't work if RESET is in PPICTRL. 2004-01-26 Theodore A. Roth * configure.ac (AC_INIT): Post release version update. 2004-01-26 Theodore A. Roth * AVRDUDE 4.3.0 has been released (cvs release tag is "release_4_3_0"). 2004-01-26 Theodore A. Roth * configure.ac: Update copyright year. (AC_INIT): Set version to 4.3.0. 2004-01-25 Theodore A. Roth * ChangeLog: Minor formatting cleanups. Move to all 2003 entries to ChangeLog-2003. * ChangeLog-2003: New file. * Makefile.am: Update copyright year. (EXTRA_DIST): Add ChangeLog-2003. 2004-01-17 Jan-Hinnerk Reichert * doc/avrdude.texi: Get rid of those black boxes marking "overfull hbox". 2004-01-17 Jan-Hinnerk Reichert * doc/avrdude.texi: New appendix "Troubleshooting". 2004-01-12 Jan-Hinnerk Reichert * avr910.c, avrpart.c, avrpart.h, doc/TODO: Look up devicecode and report device. 2004-01-03 Jan-Hinnerk Reichert * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates. * avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation. 2004-01-03 Jan-Hinnerk Reichert * avr910.c: Removed debugging stuff that is no longer needed. 2004-01-03 Jan-Hinnerk Reichert * doc/TODO: Removed two items. 2004-01-03 Jan-Hinnerk Reichert * main.c, avr.c, avr.h, par.c, stk500.c: Add function avr_chip_erase() to unify handling of cycle-count. Makes cycle-count work for avr910-programmers.