2007-10-29 Joerg Wunsch Submitted by Wolfgang Moser: patch #6121: ISP support for the C2N232I device (serial port bitbanging) * avrdude.conf.in: Add entry for c2n232i. 2007-10-29 Joerg Wunsch Submitted by : patch #6141: accept binary format immediate values * fileio.c: Detect a 0b prefix, and call strtoul() differently in that case. 2007-10-29 Joerg Wunsch bug #21076: -vvvv serial receive prints are empty in Win32 build * ser_win32.c (ser_recv): Drop the essentially unused variable "len", and use the variable "read" in order to track how many bytes have just been read in. 2007-10-29 Joerg Wunsch bug #21145: atmega329p not recognized * avrdude.conf.in: Add definitions for the ATmega329P/3290P. Same as ATmega329/3290 except of the different signature. 2007-10-29 Joerg Wunsch bug #21152: Unable to program atmega324p with avrdude 5.4 and AVRISP using default configuration file. * avrdude.conf.in: Uncomment the (bogus) stk500_devcode lines for the ATmega164P, ATmega324P, ATmega644, and ATmega644P definitions. This only affects users of STK500v1 firmware. 2007-10-29 Joerg Wunsch Submitted by : Patch #6233: Add support for USBtinyISP programmer * usbtiny.c: New file. * usbtiny.h: (Ditto.) * Makefile.am: Include usbtiny into the build. * avrdude.conf.in: (Ditto.) * config_gram.y: (Ditto.) * lexer.l: (Ditto.) * avrdude.1: Document the usbtiny support. * doc/avrdude.texi: (Ditto.) 2007-10-29 Joerg Wunsch * doc/avrdude.texi: Sort list of supported programmers into alphabetical order, add all missing programmers. 2007-07-24 Thomas Fischl * usbasp.c: Added long addresses to support devices with more than 64kB flash. Closes bug #20558: Long address problem with USBasp. 2007-06-27 Joerg Wunsch * Makefile.am (EXTRA_DIST): Add ChangeLog-2004-2006. 2007-05-16 Joerg Wunsch * configure.ac (AC_INIT): Bump version for post-release. 2007-05-16 Joerg Wunsch * configure.ac (AC_INIT): Bump version, releasing avrdude-5.4. 2007-05-16 Joerg Wunsch * avrdude.conf.in: Fix AVR910 devcodes. It seems that the AVR109 listing refers to "BOOT"-type code, while the standard codes are different (usually one below). 2007-05-16 Joerg Wunsch * avr.c (avr_read, avr_write): only use the paged_load and paged_write backend functions iff the memory area in question has a page_size != 0. This is supposed to fix bug #19234: avrdude-5.3.1 segfaults when stk500v1 tries to program an ATtiny15 2007-05-15 Joerg Wunsch * avr910.c: Fall back to avr_{read,write}_byte_default(). Fixes bug #18803: Fuse reading regression in avrdude 5.3.1 with avr910 programmer 2007-05-15 Colin O'Flynn * avrdude.conf.in: Rename the ATmega164 and ATmega324 into ATmega164P and ATmega324P, resp. Add an entry for the ATmega644P. Fixes bug #19769: ATmega164p not recognized 2007-05-15 Joerg Wunsch * ser_posix.c (ser_send): Don't select() on the output fd before trying to write something to the serial line. That kind of polling isn't very useful anyway, and it seems it breaks for the Linux CP210x USB<->RS-232 bridge driver which is certainly a bug in the driver, but we can just avoid that bug alltogether. 2007-05-15 Joerg Wunsch * avrdude.conf.in: Fix the STK500v2 ISP delay parameter for ATmega640/1280/1281/2560/2561. Atmel has changed the XML files after the initial release. 2007-05-01 Colin O'Flynn * safemode.c: -Oops - bug in verbose output. Fixed. -Fixed handling of cases where programmer cannot read fuses (AVR910) * main.c: -Also fixing handling of cases where programmer cannot read fuses This should close one or more bugs (18803, 19570) 2007-05-01 Colin O'Flynn * safemode.c: Added verbose output from safemode routines. 2007-03-25 Colin O'Flynn * stk500generic.c: Forgot to close the serial port before trying to open it again, caused problems on Windows machines. Closes bug #19411 2007-02-26 Joerg Wunsch * avrdude.conf.in: Add the AT90PWM2/3B devices. 2007-02-02 Thomas Fischl * usbasp.c: Changed return value of function usbasp_initialize to stop avrdude on communication errors between programmer and target. Closes bug #18581: safemode destroys fuse bits 2007-02-01 Joerg Wunsch * config_gram.y: Remove duplicate definition of token K_WRITEPAGE 2007-01-30 Joerg Wunsch * butterfly.c: Implement ATmega256x support for butterfly/avr109. 2007-01-30 Joerg Wunsch * configure.ac: Fix subdir handling. Now finally, "make distcheck" will include the documentation into the tarball even if the configure had been run without the --enable-doc. 2007-01-30 Joerg Wunsch * safemode.c: Obtain progname from avrdude.h rather than trying to roll our own (duplicate) copy of it. * avr910.c: Constify char pointers. * avrpart.c: (Ditto.) * avrpart.h: (Ditto.) * butterfly.c: (Ditto.) * config.c: (Ditto.) * config.h: (Ditto.) * jtagmkI.c: (Ditto.) * jtagmkII.c: (Ditto.) * par.c: (Ditto.) * pgm.c: (Ditto.) * pgm.h: (Ditto.) * serbb_posix.c: (Ditto.) * serbb_win32.c: (Ditto.) * stk500.c: (Ditto.) * stk500v2.c: (Ditto.) * usbasp.c: (Ditto.) 2007-01-29 Joerg Wunsch * avrpart.c: More backend/library abstraction and generalization: turn the list_parts() and list_programmers() functions into general list iteration functions that call a caller-supplied callback for each element. Implement list_parts() and list_programmers() as private functions in main.c based on that approach. * avrpart.h: (Ditto.) * main.c: (Ditto.) * pgm.c: (Ditto.) * pgm.h: (Ditto.) 2007-01-25 Joerg Wunsch * Makefile.am: Rearrange everything so it is now built into a libavrdude.a library, and link main.c against that library. * configure.ac: Add AC_PROG_RANLIB as we are building a library now. 2007-01-24 Joerg Wunsch Major code cleanup. - Make all internal functions "static". - Make sure each module's header and implementation file match. - Remove all library-like functionality from main.c, so only the actual frontend remains in main.c. - Add C++ brackets to all header files. * avr.c: (Ditto.) * avr.h: (Ditto.) * avr910.c: (Ditto.) * avr910.h: (Ditto.) * avrdude.h: (Ditto.) * avrpart.c: (Ditto.) * avrpart.h: (Ditto.) * bitbang.h: (Ditto.) * butterfly.h: (Ditto.) * config.c: (Ditto.) * config.h: (Ditto.) * confwin.h: (Ditto.) * crc16.c: (Ditto.) * crc16.h: (Ditto.) * fileio.c: (Ditto.) * fileio.h: (Ditto.) * jtagmkI.h: (Ditto.) * jtagmkII.h: (Ditto.) * lexer.l: (Ditto.) * lists.h: (Ditto.) * main.c: (Ditto.) * par.h: (Ditto.) * pgm.c: (Ditto.) * pgm.h: (Ditto.) * ppi.c: (Ditto.) * ppi.h: (Ditto.) * safemode.h: (Ditto.) * serbb.h: (Ditto.) * serial.h: (Ditto.) * stk500.h: (Ditto.) * stk500v2.c: (Ditto.) * stk500v2.h: (Ditto.) * term.c: (Ditto.) * term.h: (Ditto.) * usbasp.h: (Ditto.) * update.c: New file. * update.h: New file. * Makefile.am: Include update.c and update.h. 2007-01-24 Joerg Wunsch Move all "extern" declarations into a centreal header file. * Makefile.am: Add new avrdude.h. * avrdude.h: New file. * avr.c: Replace private extern decl's by #include "avrdude.h". * avr910.c: (Ditto.) * avrpart.c: (Ditto.) * bitbang.c: (Ditto.) * butterfly.c: (Ditto.) * config.c: (Ditto.) * config_gram.y: (Ditto.) * fileio.c: (Ditto.) * jtagmkI.c: (Ditto.) * jtagmkII.c: (Ditto.) * lexer.l: (Ditto.) * main.c: (Ditto.) * par.c: (Ditto.) * pgm.c: (Ditto.) * ppi.c: (Ditto.) * ppiwin.c: (Ditto.) * ser_avrdoper.c: (Ditto.) * ser_posix.c: (Ditto.) * ser_win32.c: (Ditto.) * serbb_posix.c: (Ditto.) * serbb_win32.c: (Ditto.) * stk500.c: (Ditto.) * stk500generic.c: (Ditto.) * stk500v2.c: (Ditto.) * term.c: (Ditto.) * usb_libusb.c: (Ditto.) * usbasp.c: (Ditto.) 2007-01-13 Joerg Wunsch * avrdude.conf.in (ATmega8): Bump the delay values for flash and EEPROM, based on the current Atmel XML file. 2007-01-12 Joerg Wunsch * configure.ac: Improve the detection of the Win32 HID library, and the presence of the header ddk/hidsdi.h. It now works correctly under Cygwin and several flavours of MinGW. * Makefile.am: Add new LIBHID pattern. 2007-01-11 Joerg Wunsch * butterfly.c (butterfly_initialize): when sending the 'T' command (which is ignored by current AVR109 bootloaders), send the first reply from the list of supported device codes back rather than using avrdude.conf's idea about an AVR910 device code. Apparently, this solves disagreements between different versions of at least the ATmega8 AVR910 device code. Closes bug #18727: Writing flash failed 2007-01-07 Joerg Wunsch Reported by Till Harbaum: * avrdude.conf.in (ATtiny25/45/85): Change HVSP reset from 500 microseconds to 1 ms, matching the most recent Atmel XML specs.