2014-10-06 Joerg Wunsch bug #22248: Read efuse error * avrdude.conf.in (m168, m328, m48, m88, t1634, t26, t261, t461, t861, t88): In efuse (or hfuse for t26) read operation, turn all bits in byte 3 from "x" to "o" (output); this is a first step towards fixing the symptoms mentioned in the bug, by unifying the behaviour between different AVRs. Not touched are the historic devices where the fuses are not documented to form a full byte each (2333, 4433, 4434, 8535, m103, m161, m163). 2014-09-22 Joerg Wunsch bug #43268: usb_drain() call causes LUFA AVR-ISP MKII Code to Fail * usb_libusb.c (usbdev_drain): Make this a dummy function only. 2014-08-19 Rene Liebscher patch #7694 Add support for the atmega32m1 * avrdude.conf.in: added ATmega32M1 2014-08-18 Rene Liebscher patch #8440 Print part id after signature When printing the part signature also print the part id. * avrpart.c (locate_part_by_signature): New function. * libavrdude.h (locate_part_by_signature): New function. * main.c (main): Use the new function to find the part and print its id. 2014-08-18 Rene Liebscher patch #8511 Fix reset on FT245R * ft245r.c: applied patch 2014-08-18 Rene Liebscher bug #43002 usbasp debug output typo * usbasp.c: fixed typos 2014-07-16 Joerg Wunsch bug #42662 clang warnings under FreeBSD 10.x * avrftdi.h: Fix header guard macro name. * pgm_type.c (programmers_types): Remove duplicate "const". 2014-07-16 Rene Liebscher bug #42662 clang warnings under FreeBSD 10.x * avrftdi.c: remove warnings * buspirate.c: (Dito.) * dfu.c: (Dito.) * fileio.c: (Dito.) * libavrdude.h: (Dito.) * pickit2.c: (Dito.) * safemode.c: (Dito.) * ser_avrdoper.c: (Dito.) * ser_posix.c: (Dito.) * ser_win32.c: (Dito.) * stk500v2.c: (Dito.) * usb_libusb.c: (Dito.) * usbasp.c: (Dito.) * config_gram.y: fix problem when using parent part with usbpid lists (existing list was extended not overwritten) 2014-07-11 Axel Wachtler * avrftdi.c: rollback to vfprintf, fixed error from -r1305, (patch #8463) 2014-06-23 Rene Liebscher * linux_ppdev.h: added missing msg level for avrdude_message in ppi_claim/ppi_release macros * avrftdi.c: added break at end of default 2014-06-21 Rene Liebscher patch #8419 fix ftdi_syncbb hang with libftdi 1 * ft245r.c: set pthread cancel type to asynchronous, reorder ftdi_usb_close/deinit 2014-06-17 Rene Liebscher * avrftdi_private.h: added missing msg level for avrdude_message in E/E_VOID macros 2014-06-17 Rene Liebscher Removing exit calls from config parser * config.h: cleanup, left only internally needed definitions * config.c: removed exit calls, use yyerror and yywarning * config_gram.y: (Dito.) * lexer.l: (Dito.) * libavrdude.h: removed internal definitions of config parser * main.c: removed yyerror, it is now in config.c * jtagmkII.c: added missing free in error case * pgm.c: replaced exits by returns * pickit2.c: add missing return 2014-06-13 Axel Wachtler start removing global "verbose" variable, for avrdude library. * arduino.c: added verbose level in avrdude_message() * avr910.c: (Dito.) * avr.c: (Dito.) * avrdude.h: (Dito.) * avrftdi.c: (Dito.) * avrpart.c: (Dito.) * bitbang.c: (Dito.) * buspirate.c: (Dito.) * butterfly.c: (Dito.) * config.c: (Dito.) * config_gram.y: (Dito.) * dfu.c: (Dito.) * fileio.c: (Dito.) * flip1.c: (Dito.) * flip2.c: (Dito.) * ft245r.c: (Dito.) * jtag3.c: (Dito.) * jtagmkI.c: (Dito.) * jtagmkII.c: (Dito.) * lexer.l: (Dito.) * libavrdude.h: (Dito.) * linuxgpio.c: (Dito.) * main.c: (Dito.) * par.c: (Dito.) * pgm.c: (Dito.) * pickit2.c: (Dito.) * pindefs.c: (Dito.) * ppi.c: (Dito.) * ppiwin.c: (Dito.) * safemode.c: (Dito.) * ser_avrdoper.c: (Dito.) * serbb_posix.c: (Dito.) * serbb_win32.c: (Dito.) * ser_posix.c: (Dito.) * ser_win32.c: (Dito.) * stk500.c: (Dito.) * stk500generic.c: (Dito.) * stk500v2.c: (Dito.) * term.c: (Dito.) * update.c: (Dito.) * usbasp.c: (Dito.) * usb_libusb.c: (Dito.) * usbtiny.c: (Dito.) * wiring.c: (Dito.) 2014-06-11 Rene Liebscher bug #42516 spelling-error-in-binary * stk500v2.c, avrftdi.c, usbasp.c: fixed spelling errors 2014-06-01 Rene Liebscher bug #42337 avrdude.conf updates for UM232H/CM232H * avrdude.conf.in: fixed entries as proposed 2014-05-19 Joerg Wunsch bug #41854: avrdude 6.1 does not compile on systems without libUSB Submitted by Didrik Madheden: * flip1.c: Provide dummy functions for the #ifndef HAVE_LIBUSB case * flip2.c: (Dito.) 2014-05-19 Joerg Wunsch * libavrdude.h: Join the former "public" header files (avr.h avrpart.h pindefs.h serial.h fileio.h safemode.h update.h pgm_type.h config.h confwin.h lists.h) into a single header that can be included by anyone wanting to link against the library * avr.h: Remove file. * avrpart.h: (Dito.) * pindefs.h: (Dito.) * serial.h: (Dito.) * fileio.h: (Dito.) * safemode.h: (Dito.) * update.h: (Dito.) * pgm.h: (Dito.) * pgm_type.h: (Dito.) * config.h: (Dito.) * confwin.h: (Dito.) * lists.h: (Dito.) * Makefile.am: Adapt for new include file constellation; install shared lib * configure.ac: Bump version date * arduino.c: #include rather than a bunch of different headers * avr910.c: (Dito.) * avr910.h: (Dito.) * avr.c: (Dito.) * avrftdi.c: (Dito.) * avrftdi_private.h: (Dito.) * avrftdi_tpi.c: (Dito.) * avrftdi_tpi.h: (Dito.) * avr.h: (Dito.) * avrpart.c: (Dito.) * avrpart.h: (Dito.) * bitbang.c: (Dito.) * buspirate.c: (Dito.) * butterfly.c: (Dito.) * config.c: (Dito.) * config_gram.y: (Dito.) * config.h: (Dito.) * confwin.c: (Dito.) * confwin.h: (Dito.) * dfu.c: (Dito.) * fileio.c: (Dito.) * fileio.h: (Dito.) * flip1.c: (Dito.) * flip1.h: (Dito.) * flip2.c: (Dito.) * flip2.h: (Dito.) * ft245r.c: (Dito.) * ft245r.h: (Dito.) * jtag3.c: (Dito.) * jtagmkI.c: (Dito.) * jtagmkII.c: (Dito.) * lexer.l: (Dito.) * libavrdude.h: (Dito.) * linuxgpio.c: (Dito.) * lists.c: (Dito.) * lists.h: (Dito.) * main.c: (Dito.) * par.c: (Dito.) * pgm.c: (Dito.) * pgm_type.c: (Dito.) * pgm_type.h: (Dito.) * pickit2.c: (Dito.) * pickit2.h: (Dito.) * pindefs.c: (Dito.) * pindefs.h: (Dito.) * ppi.c: (Dito.) * ppiwin.c: (Dito.) * safemode.c: (Dito.) * safemode.h: (Dito.) * ser_avrdoper.c: (Dito.) * serbb_posix.c: (Dito.) * serbb_win32.c: (Dito.) * serial.h: (Dito.) * ser_posix.c: (Dito.) * ser_win32.c: (Dito.) * stk500.c: (Dito.) * stk500generic.c: (Dito.) * stk500v2.c: (Dito.) * stk500v2_private.h: (Dito.) * term.c: (Dito.) * term.h: (Dito.) * update.c: (Dito.) * update.h: (Dito.) * usbasp.c: (Dito.) * usbasp.h: (Dito.) * usb_libusb.c: (Dito.) * usbtiny.c: (Dito.) * usbtiny.h: (Dito.) * wiring.c: (Dito.) 2014-05-19 Joerg Wunsch * main.c: Cleanup unused include files. 2014-05-19 Joerg Wunsch * linux_ppdev.h: Caught two more instances of exit() * configure.ac: Add AC_CONFIG_MACRO_DIR as suggested by libtoolize * Makefile.am: add -I m4 to ACLOCAL_AMFLAGS as suggested by libtoolize 2014-05-16 Axel Wachtler * arduino.c: Replacing all occurences of fprintf(stderr,...) with avrdude_message(...) in potential library functions. * avr910.c: (Dito.) * avr.c: (Dito.) * avrdude.h: (Dito.) * avrftdi.c: (Dito.) * avrftdi_private.h: (Dito.) * avrpart.c: (Dito.) * bitbang.c: (Dito.) * buspirate.c: (Dito.) * butterfly.c: (Dito.) * config.c: (Dito.) * config_gram.y: (Dito.) * dfu.c: (Dito.) * fileio.c: (Dito.) * flip1.c: (Dito.) * flip2.c: (Dito.) * ft245r.c: (Dito.) * jtag3.c: (Dito.) * jtagmkI.c: (Dito.) * jtagmkII.c: (Dito.) * lexer.l: (Dito.) * linuxgpio.c: (Dito.) * linux_ppdev.h: (Dito.) * main.c: (Dito.) * par.c: (Dito.) * pgm.c: (Dito.) * pickit2.c: (Dito.) * pindefs.c: (Dito.) * ppi.c: (Dito.) * ppiwin.c: (Dito.) * safemode.c: (Dito.) * ser_avrdoper.c: (Dito.) * serbb_posix.c: (Dito.) * serbb_win32.c: (Dito.) * ser_posix.c: (Dito.) * ser_win32.c: (Dito.) * stk500.c: (Dito.) * stk500generic.c: (Dito.) * stk500v2.c: (Dito.) * term.c: (Dito.) * update.c: (Dito.) * usbasp.c: (Dito.) * usb_libusb.c: (Dito.) * usbtiny.c: (Dito.) * wiring.c: (Dito.) 2014-05-16 Joerg Wunsch * configure.ac: Bump version, add libtool hooks * Makefile.am: First attempt to define building a shared library (not to be installed by now) 2014-05-16 Joerg Wunsch * dfu.c (dfu_open, dfu_init): Fix signature of the dummy functions (in the !HAVE_LIBUSB case) to match prototypes. 2014-05-16 Joerg Wunsch * avr910.c: Replace all occurences of exit() in potential library functions by appropriate return values * avrftdi.c: (Dito.) * bitbang.c: (Dito.) * bitbang.h: (Dito.) * buspirate.c: (Dito.) * butterfly.c: (Dito.) * config.c: (Dito.) * flip2.c: (Dito.) * ft245r.c: (Dito.) * jtagmkI.c: (Dito.) * jtagmkII.c: (Dito.) * linuxgpio.c: (Dito.) * main.c: (Dito.) * par.c: (Dito.) * pgm.c: (Dito.) * pickit2.c: (Dito.) * pindefs.c: (Dito.) * pindefs.h: (Dito.) * ser_avrdoper.c: (Dito.) * ser_posix.c: (Dito.) * ser_win32.c: (Dito.) * serbb_posix.c: (Dito.) * serbb_win32.c: (Dito.) * stk500.c: (Dito.) * stk500v2.c: (Dito.) 2014-05-07 Rene Liebscher bug #42310: New part description for AT90PWM216 * avrdude.conf.in: added pwm216 entry 2014-05-07 Rene Liebscher bug #42158: Linux GPIO - Source Typo * pindefs.h: fixed typo 2014-04-14 Rene Liebscher bug #42056: double free or corruption triggered at exit * pgm.c: copy usbpid list in pgm_dup 2014-04-05 Joerg Wunsch * avrdude.1: Remove the note that users might edit the system-wide config file. This file will be overwritten by the next installation, so it's not a good idea to manually modify it. Using the -C +file option is a much better way for user modifications. * doc/avrdude.texi: (Dito.) * avrdude.conf.in: Add a warning to not modify the file manually. 2014-03-13 Joerg Wunsch * configure.ac (AC_INIT): Bump version for post-6.1. 2014-03-12 Joerg Wunsch * configure.ac (AC_INIT): Bump version to 6.1. 2014-03-12 Joerg Wunsch * pgm.c (pgm_free): Cleanup police: destroy the p->usbpid list when freeing the programmer struct. 2014-03-12 Joerg Wunsch bug #40782: Verify errors for object size > 16 k on x32e5 due to typo in avrdude.conf * avrdude.conf.in (ATmega8E5, ATmega32E5): fix boot location 2014-02-28 Joerg Wunsch * avrdude.conf.in (atmelice, atmelice_pdi, atmelice_dw, atmelice_isp): New entries. * avrdude.1: Document the Atmel-ICE addition. * doc/avrdude.texi: (Dito.) * usbdevs.c (USB_DEVICE_ATMEL_ICE): New entry. 2014-02-28 Joerg Wunsch * main.c: Bump copyright year. 2014-02-28 Joerg Wunsch * jtag3.c (jtag3_recv): avoid memmov'ing more data than available 2014-02-27 Joerg Wunsch * avrdude.1: Documentation update for EDBG. * doc/avrdude.texi: (Dito.) 2014-02-27 Joerg Wunsch * jtag3.c: For EDBG protocol, always use 512-byte block I/O. The lower layers will split this according to the EP's maxsize. This makes it work over USB 1.1 connections (albeit very slowly, due to the interrupt transfers used). 2014-02-27 Joerg Wunsch * config_gram.y: Turn the usbpid parameter of the programmer into a list of PIDs. Make the JTAGICE3 programmer handle a list of PIDs, by trying each of them in sequence. Use a single, central jtag3_open_common() function to handle the common code of all jtag3_open_* functions. Centralize all USB VID/PID definitions in usbdevs.h. * flip1.c: (Dito.) * ft245r.c: (Dito.) * stk500v2.c: (Dito.) * jtag3.c: (Dito.) * jtag3.h: (Dito.) * flip2.c: (Dito.) * usbdevs.h: (Dito.) * pgm.c: (Dito.) * serial.h: (Dito.) * pgm.h: (Dito.) * usbtiny.c: (Dito.) * usbasp.c: (Dito.) * avrftdi.c: (Dito.) * usbtiny.h: (Dito.) * avrdude.conf.in: (Dito.) * usbasp.h: (Dito.) * usb_libusb.c: (Dito.) 2014-02-27 Joerg Wunsch * usb_libusb.c (usbdev_open): Replace all calls to exit(1) by return -1 2014-02-26 Joerg Wunsch * jtag3_private.h: Add EDBG/CMSIS-DAP specific constants. * jtag3.c: Add EDBG/CMSIS-DAP protocol implementation. * serial.h: (Dito.) * usbdevs.h: (Dito.) * usb_libusb.c: (Dito.) * configure.ac: (Dito.) * avrdude.conf.in: Add JTAGICE3 and XplainedPro entries using EDBG. * configure.ac: Bump version date. 2014-02-22 Joerg Wunsch * usb_libusb.c (usbdev_recv_frame): Fix a bug where a new recv request was issued even though all desired data had aldready been received. 2014-02-21 Joerg Wunsch * serial.h: Change the second parameter of the ser_open method from "baud" into a "union pinfo", so the USB parameters can be passed without hacks. * arduino.c: (Dito.) * avr910.c: (Dito.) * buspirate.c: (Dito.) * butterfly.c: (Dito.) * jtag3.c: (Dito.) * jtagmkI.c: (Dito.) * jtagmkII.c: (Dito.) * ser_avrdoper.c: (Dito.) * ser_posix.c: (Dito.) * ser_win32.c: (Dito.) * stk500.c: (Dito.) * stk500v2.c: (Dito.) * usb_libusb.c: (Dito.) * wiring.c: (Dito.) 2014-01-30 Joerg Wunsch [bug #41402] dfu.c missing include * dfu.c: include where uint16_t is defined 2014-01-28 Joerg Wunsch * avrdude.conf.in (ATmega256RFR2 et al.): Fix EEPROM size. 2014-01-27 Joerg Wunsch [bug #41357] OS X: Avrdude messes with the usb stack? * usb_libusb.c (usbdev_close): Only issue the usb_reset() for Linux systems, as these are the only ones that seem to require it under some circumstances. 2014-01-22 Joerg Wunsch * configure.ac (libelf): check against elf_getshdrstrndx() rather than just elf_begin() only, so it is clear we found a sufficiently recent libelf to work with. 2014-01-22 Joerg Wunsch Contributed by Alan Horstmann: bug #40897: AT Mega2560 not correctly programmed with stk500(v1) ISP (solution patch) * stk500.c: Implement extended address byte handling. * avrdude.conf.in (ATmega2560): enable stk500_devcode so STK500v1 protocol actually starts at all. 2014-01-17 Joerg Wunsch * flip1.c: Implement the meat of FLIP version 1 protocol. * avrdude.1: Document the new protocol. * doc/avrdude.texi: (Dito.) 2014-01-17 Joerg Wunsch * flip2.c (flip2_page_erase): Remove unimplemented function. * dfu.h: Correctly conditionalize vs. ; add adjustable timeout (struct dfu_dev); add dfu_abort() * dfu.c (dfu_abort): New function; implement adjustable timeout. 2014-01-17 Joerg Wunsch * configure.ac (libhid): Turn from AC_TRY_RUN into AC_TRY_COMPILE, so it also works for cross-compilation setups. 2014-01-16 Joerg Wunsch * dfu.c (dfu_init): Move the descriptor checks up into the FLIP protocol implementation. * flip2.c (flip2_initialize): (Dito.) * flip1.c (flip1_initialize): (Dito.) 2014-01-16 Joerg Wunsch * flip2.c: Rename from flip.c * flip2.h: Rename from flip.h * Makefile.am: Reflect the renaming. * dfu.c: Update information how to get GPL. * dfu.h: (Dito.) 2014-01-16 Joerg Wunsch * flip.c (flip2_initialize): Check user is running on an Xmega device. 2014-01-15 Joerg Wunsch * flip.c: Added some verbose-level messages (-vv) * dfu.c: Added some verbose-level messages (-vvvv) 2014-01-15 Joerg Wunsch Submitted by Kirill Levchenko: patch #7896: DFU FLIPv2 programming support * pgm_type.c: Add the flip2 programmer type. * config_gram.y: Allow for the usbid keyword in a device definition. * avrdude.conf.in: Add usbpid values to those Xmega devices where applicable. * avrpart.h: Add usbpid device field. * dfu.c: (New file.) * dfu.h: (New file.) * flip.c: (New file.) * flip.h: (New file.) * Makefile.am: Add new files. * doc/avrdude.texi: Document the changes. * avrdude.1: (Dito.) 2014-01-15 Joerg Wunsch * ChangeLog-2013: Annual changelog rotation.