2012-06-07 Joerg Wunsch * usbtiny.c (usbtiny_paged_load, usbtiny_paged_write): fix breakage introduced by the recent page handling reorg; it used to cause an infinite loop 2012-05-04 Joerg Wunsch Xmega page erase implementation for XPROG (AVRISPmkII, STK600) * stk500v2.c (stk600_xprog_page_erase): New function. 2012-05-04 Joerg Wunsch Xmega page erase implementation for JTAGICEmkII * jtagmkII.c: Handle flash pages sizes > 256 bytes, implement page_erase() method * avrdude.conf.in: Change flash pagesize for all Xmega devices to 512 bytes * avr.c: Implement auto_erase, using page_erase if available * avr.h: Remove unused parameters from avr_read(), replace unused parameter in avr_write)() by auto_erase * stk500v2.c: Handle flash page sizes > 256 bytes * update.c (do_op): Handle new updateflags parameter * main.c: Implement auto_erase as page_erase if possible * update.h (enum updateflags): New enum * pgm.h (struct programmer_t): Add page_erase method 2012-04-26 Joerg Wunsch * jtagmkII.c (jtagmkII_paged_load, jtagmkII_paged_write): fix bug in memory type calculation for Xmega "boot" memory region. 2012-04-25 Joerg Wunsch * update.c (parse_op): do not assume default memtype here * main.c: after locating the part information, determine default memtype for all update options that didn't have a memtype specified; this is "application" for Xmega parts, and "flash" for everything else. 2012-04-24 Joerg Wunsch * fileio.c: Rework the way ELF file sections are considered: while scanning the program header table, the offsets from a program header entry must never be used directly when checking the bounds of the current AVR memory region. Instead, they must always be checked based on the corresponding section's entry. That way, Xmega devices now properly take into account whether the segment fits into any of the application/apptable/boot memory region. 2012-04-20 Joerg Wunsch bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't read device signature * main.c: When reading the signature yields 0x000000 or 0xffffff, retry (up to twice) after some progressive delay. 2012-04-20 Joerg Wunsch * avrdude.conf.in (ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4): New devices. As Xmega D doesn't feature a fuse0 memory cell, move that one out from the generic .xmega part into the individual Xmega A parts. 2012-04-19 Joerg Wunsch bug #29019: pagel/bs2 warning when uploading using stk500 to xmega * stk500.c (stk500_initialize): Insert dummy values for PAGEL and BS2 if they are not present in the config file, in order to be able to proceed with the stk500_set_extended_parms() anyway. 2012-04-19 Joerg Wunsch * stk500v2_private.h (struct pdata): add boot_start * stk500v2.c: For the "flash" pseudo-memory of Xmega devices, distinguish addresses between "application" and "boot" area. 2012-04-18 Joerg Wunsch * fileio.c (elf2b): When checking the bounds of the current program header segment, subtract `low' from ph[n].p_paddr in order to correct the magic section offsets for the AVR's non-flash memory regions. 2012-04-18 Joerg Wunsch * fileio.c (elf_get_scn): Rather than trying to just match whether any given section maps straight to a program header segment, use a more sophisticated decision that matches any section as long as it fits into the segment. This is needed for situations where the program header segment spans a larger area than the section data provided. (This can e.g. happen in an ELF file that contains no data at address 0, like a bootloader only.) 2012-04-13 Joerg Wunsch bug #28744: Can't load bootloader to xmega128a1 (part 2, fix for firmware >= V7.x) * jtagmkII.c: Add firmware-version dependent handling of Xmega parameters. V7.x firmware expects the NVM offsets being specified through the Xmega parameters command, but left out as part of the memory address itself. * jtagmkII_private.h: Add CMND_SET_XMEGA_PARAMS, and struct xmega_device_desc. * config_gram.y: Add mcu_base keyword. * avrpart.h: (Dito.) * lexer.l: (Dito.) * avrdude.conf.in (.xmega): add mcu_base, and data memory segment. 2012-03-30 Joerg Wunsch bug #28744: Can't load bootloader to xmega128a1 (part 1, fix for firmware < V7.x) * jtagmkII.c: When going to write to the boot section of flash, use MTYPE_BOOT_FLASH rather than MTYPE_FLASH * jtagmkII_private.h: add MTYPE_BOOT_FLASH constant 2012-03-30 Joerg Wunsch * jtagmkII_private.h: Sort commands, response codes and events into numerical order. 2012-03-29 Joerg Wunsch bug #30451: Accessing some Xmega memory sections gives not supported error * stk500v2.c: Handle all Xmega memory sections (except "prodsig" which is not documented in AVR079) * fileio.c: Treat the "boot", "application", and "apptable" regions (which are actually subregions of "flash") all as being flash, i.e. suppress trailing 0xFF bytes when reading them * avr.c: (Dito.) 2012-03-20 Joerg Wunsch * jtagmkII.c (jtagmkII_close): The GO command before signing off turned out to be not required for normal megaAVR devices, and to cause the exact opposite (i.e. the target stopping) on Xmega devices being programmed to JTAG. However, programming Xmega devcies through PDI *does* need the GO command. 2012-03-20 Joerg Wunsch * configure.ac: Print a configuration summary at the end of the configure run 2012-02-11 Rene Liebscher patch #7718: Merge global data of avrftdi in a private data structure * avrftdi.[ch]: moved global data into private data structure, moved private defines from header file into source file 2012-02-06 Rene Liebscher patch #7720 Bug in EEPROM write * avrftdi.c: fixed wrong buffer address initialization in paged_write * fileio.c: added #include 2012-02-05 Rene Liebscher bug #30559 Ft232 bit-bang support * ft245r.c: cancel reader thread before exiting program 2012-02-04 Rene Liebscher patch #7717 avrftdi_flash_write is broken * avrftdi.c: fixed wrong buffer address initialization in paged_write bug #35296 Extraneous newlines in output. * main.c: fixed output of newlines at 100% progress 2012-02-03 Rene Liebscher patch #7715 FT4232H support * avrdude.conf.in: added programmer 4232h 2012-02-03 Rene Liebscher patch #7687: Autogenerating programmers and parts lists for docs (generating the programmers lists) * doc/avrdude.texi: Add include of generated table of programmers * doc/Makefile.am: Add generating of table of programmers in programmers.texi 2012-02-03 Rene Liebscher bug #34768 Proposition: Change the name of the AVR32 devices * avrdude.conf.in: renamed ucr2 to uc3a0512 * avrpart.c: added cast to avoid compiler warning 2012-02-03 Joerg Wunsch * fileio.c (fileio_elf): Fix a copy'n-paste-o. 2012-02-03 Joerg Wunsch * par.c (par_desc): Move to end of file, outside the #if HAVE_PARPORT 2012-02-02 Joerg Wunsch Implement ELF file reading (finally). Requires libelf(3) to be present on the host system. * configure.ac (HAVE_LIBELF): Add logic to detect presence of libelf(3) * Makefile.am (avrdude_LDADD): Add @LIBELF@ * fileio.h (FILEFMT): add FMT_ELF * fileio.c: Implement ELF file reader. * update.c (parse_op): add 'e' format specifier * avrdude.1: Document the ELF file reading capability * doc/avrdude.texi: (Dito.) 2012-02-01 Rene Liebscher bug #30559 Ft232 bit-bang support * ft245r.[ch]: new programmer type implementation * configure.ac: add pthread as link library * avrdude.conf.in: added some new programmers * Makefile.am: added new source files to compile * pindefs.h: change PIN_MASK, PIN_INVERSE to highest bit of unsigned int * pgm.[ch]: added generic function to print pin assignments (taken from par.c) * par.c: moved pin assigment print function to pgm.c 2012-02-01 Joerg Wunsch * lexer.l: Sort keyword tokens into alphabetic order. 2012-01-31 Rene Liebscher * config_gram.y, lexer.l: removed unused ID/TKN_ID definitions * config.[hc]: removed unused function id(), use value.type to select values 2012-01-31 Rene Liebscher patch #7437 modifications to Bus Pirate module patch #7686 Updating buspirate ascii mode to current firmware, use AUX as clock generator, and setting of serial receive timeout * buspirate.c: added paged_write, changed binary mode setup/detection, added clock output on AUX pin * avrdude.1: updated documentation * doc/avrdude.texi: updated documentation 2012-01-31 Rene Liebscher Parser does not need to know all programmer types now, new programmers will update only the table in pgm_type.c. * config_gram.y, lexer.l: removed programmer type keywords, use now locate_programmer_type() function * pgm_type.[ch]: added new files for table of programmer types * main.c: allow list of programmer types by -c ?type * avrdude.conf.in: changed all type keywords to quoted strings * doc/avrdude.texi: changed description of type definition, list of valid types is now included from generated file * doc/Makefile.am: generate list of programmer types for doc * all programmers [hc]: add xxx_desc string for description of programmer 2012-01-30 Rene Liebscher * configure.ac: fixed detection of yylex_destroy availability by checking the version number of flex; bump required autoconf version to 2.60 (for AC_PROG_SED) 2012-01-30 Joerg Wunsch * lexer.l: Replace the old, now-defunct #define YY_NO_UNPUT by the new %option nounput. This gets rid of a compiler warning. 2012-01-30 Joerg Wunsch Add a connection_type attribute to each programmer, rather than trying to hard-code the default port name in main.c. * pgm.h: Add conntype to struct pgm. * lexer.l: Extend grammar for connection_type. * config_gram.y: (Dito.) * config.h: Add DEFAULT_USB, for symmetry with default_parallel and default_serial. * main.c: Replace old default portname hack by avrdude.conf-based knowledge. * usbtiny.c: Drop an old hack that's no longer necessary. * avrdude.conf.in: Add connection_type to each programmer definition. 2012-01-27 Rene Liebscher * avrdude.conf.in: used parent parts for some other parts, added abstract .xmega part as parent for xmegas * main.c: hide parts starting with '.' from parts list 2012-01-22 Rene Liebscher patch #7688: Implement parent programmers feature * avrdude.conf.in: updated documentation comment and some programmers have now parents * config_gram.y: initpgm will now called at first use of programmer in main. parser sets only the function pointer in the pgm structure. Pin and pin lists definitions can now be empty to remove the parents setting. * doc/avrdude.texi: updated documentation * main.c: added call to pgm->initpgm after locate_programmer * pgm.[hc]: added field initpgm in structure, added function pgm_dup 2012-01-21 Rene Liebscher bug #21797: AT90PWM316: New part description * avrdude.conf.in: added pwm316 with parent pwm3b but 16KB flash 2012-01-20 Joerg Wunsch * configure.ac: Check for presence of lusb_usb.h as an alternative to usb.h; libusb-win32 switched to this name in version 1.2.5.0. * avrftdi.c: Decide whether to include , or . * ser_avrdoper.c: (Dito.) * usbasp.c: (Dito.) * usb_libusb.c: (Dito.) * usbtiny.c: (Dito.) 2012-01-19 Rene Liebscher * avr.c: Unsigned variable was used for return code of paged_write/load functions. So a negative return code led never to a fallback to byte functions. 2012-01-17 Rene Liebscher bug #34302: Feature request : device configuration with parent classes * config_gram.y: if memory section is overwritten old entry is removed (not in original patch) * config_gram.y: if programmer or part is defined twice, a warning is output and the first instance is removed General cleanup and free functions, so valgrind does not report any lost blocks at program end. * avrpart.[hc]: added avr_free_(opcode|mem|part) functions * pgm.[hc]: added pgm_free function * update.[hc]: added free_update functions * config.[hc]: added cleanup_config function, use yylex_destroy to reset the lexer after usage. (So it can be reused.) * main.c: add cleanup_main function which is called by atexit() (This frees all lists so that at program exit only really lost memory is reported by valgrind.) * usbasp.c: added libusb_free_device_list() and libusb_exit() calls to avoid lost memory * buspirate.c: moved memory allocation from initpgm to setup and added free in teardown * configure.ac: add definition of HAVE_YYLEX_DESTROY if $LEX is flex. * Makefile.am: added . in front of SUBDIRS to build avrdude before trying to use it for creating the part list for the docs. 2012-01-17 Rene Liebscher * usbasp.c: USB vid/pid/vendor/product from config file are used, for id "usbasp" nibobee and old usbasp are tried as they were currently implemented within usbasp * avrdude.conf.in: added usb params to "usbasp", added new entry "nibobee" with params which were hardcoded in usbasp.c, and added an entry "usbasb-clone" which only checks vid/pid. 2012-01-10 Rene Liebscher bug #35261 avrftdi uses wrong interface in avrftdi_paged_(write|load) * avrftdi.c: Fixed interface and implementation of avrftdi_paged_(write|load) patch #7672 adding support for O-Link (FTDI based JTAG) as programmer * avrdude.conf.in: added o-link entry 2012-01-10 Rene Liebscher patch #7699 Read additional config files * main.c: Added reading of additional config files * avrdude.1: updated man page * doc/avrdude.texi: updated documentation 2012-01-10 Joerg Wunsch Submitted by Bob Frazier: bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly * arduino.c (arduino_open): Bump the timeout between pulling the DTR and RTS lines low and high. 2012-01-08 Rene Liebscher Fixed following findings reported by cppcheck * avr910.c:625 (error) Possible null pointer dereference: cmd - otherwise it is redundant to check if cmd is null at line 624 * avr910.c:626 (error) Possible null pointer dereference: cmd - otherwise it is redundant to check if cmd is null at line 624 * avr910.c:168 (information) The scope of the variable 'devtype_1st' can be reduced * avr910.c:169 (information) The scope of the variable 'dev_supported' can be reduced * avrftdi.c:647 (error) Using sizeof for array given as function argument returns the size of pointer. * stk500v2.c:3347 (error) Memory leak: b * stk500v2.c:3452 (error) Memory leak: b * usbasp.c:554 (error) Using sizeof for array given as function argument returns the size of pointer. * usbasp.c:485 (information) The scope of the variable 'dly' can be reduced 2012-01-03 Joerg Wunsch Reported by Jason Kotzin: * usbasp.c (usbasp_spi_paged_load, usbasp_spi_paged_write): Fix buffer address calculation. 2012-01-03 Rene Liebscher patch #7629 add support for atmega48p * avrdude.conf.in: Added m48p with parent m48 + different signature * avrdude.conf.in: made part parents (m88p = m88 + different signature, m168p = m168 + different signature) 2012-01-02 Rene Liebscher bug #21663 AT90PWM efuse incorrect bug #30438 efuse bits written as 0 on at90pwmxx parts * avrdude.conf.in: (pwm2, pwm2b, pwm3, pwm3b) : Write eight bits * avrdude.conf.in: made part parents (pwm3 = pwm2, pwm3b = pwm2b, pwm2b = pwm2 + different signature) * ChangeLog-2011: New file, rotate ChangeLog for new year.