Commit Graph

9 Commits

Author SHA1 Message Date
Joerg Wunsch 86432b91d9 Submitted by Brett Hagman:
Add support for the "Wiring" board/bootloader
* wiring.c: New file.
* wiring.h: (Ditto.)
* Makefile.am: Add new files.
* stk500v2_private.h: Reorganize so some functions and struct
pdata are globally known.
* stk500v2.c: (Ditto.)
* stk500v2.h: (Ditto.)
* lexer.l: Add new programmer keywords.
* config_gram.y: (Ditto.)
* avrdude.conf.in: Add "wiring" programmer entry.
* avrdude.1: Document the new programmer.
* doc/avrdude.texi: (Ditto.)
* AUTHORS: Add Brett Hagman.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@987 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 20:22:09 +00:00
Joerg Wunsch ec2df64017 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
Joerg Wunsch 5bf9e2d9f2 Major code cleanup.
- Make all internal functions "static".
- Make sure each module's header and implementation file match.
- Remove all library-like functionality from main.c, so only
  the actual frontend remains in main.c.
- Add C++ brackets to all header files.

That effectively leaves the various module C files as something like
an "avrdude library", with main.c being the currently only frontend
program for that library.  In theory, it should be possible to write
different frontends using the same library backend functions though.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@722 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 22:43:46 +00:00
Joerg Wunsch 31f93ccb59 Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
Joerg Wunsch 90d6100d88 Add support for the AVR Dragon (JTAG and ISP mode).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@675 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-26 21:14:10 +00:00
Joerg Wunsch 995bd68034 Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
Joerg Wunsch dbf083fb4d Implement STK500 (v2) HVSP mode.
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-21 21:53:49 +00:00
Joerg Wunsch 8bdbf1774e First stab at an implementation of the STK500 parallel programming
feature (v2 firmware only), named "stk500pp".  Still not yet
complete: EEPROM writes not working, documentation missing, only
ATmega16 parameters available in avrdude.conf.in, some parameters
not yet implemented.

* avrdude.conf.in: Add sample parameters for PP mode to ATmega16.
* avrpart.h: Add the parallel programming control parameters.
* avrpart.c: (Ditto.)
* config_gram.y: Add stk500pp configuration grammar.
* lexer.l: Add stk500pp token recognition.
* stk500v2.h: Add declaration for stk500pp_initpgm().
* stk500v2.c: Add stk500pp implementation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@587 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-16 21:30:14 +00:00
Joerg Wunsch 04831af970 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00