Commit Graph

144 Commits

Author SHA1 Message Date
joerg_wunsch 9049b590bd Add "efuse" sections to the ATmega164/324/644 definitions.
Iff enter_progmode failed with RSP_ILLEGAL_JTAG_ID, give the user a
hint that their JTAGEN fuse might be unset.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@476 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-14 21:44:34 +00:00
joerg_wunsch 57c42005c6 Add support for the ATmega164/324/644.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@475 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-14 20:18:42 +00:00
joerg_wunsch 2bf1b6b9f4 Fix broken page/intrapage address bit assignments for the ATmega649x.
Now loading flash works on these devices even for simple parallel ISP
adapters.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@474 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-13 21:24:06 +00:00
joerg_wunsch ce34239c67 Add support for the ATmega329x/649x chips. Note that STK500v1 is not
officially supported for this device.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@473 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-11 21:27:09 +00:00
joerg_wunsch cac225a77b Add an "jtag2fast" programmer that connects to the JTAG ICE at 115200 Bd.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@463 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-14 07:57:24 +00:00
joerg_wunsch 6ba0f493b4 Quite some cleanup of the JTAG ICE mkII stuff.
. Implement the new EECRAddress field in the device descriptor that is
  required by the 4.x firmware; make an uneducated guess about what
  firmware requires what length of device descriptor -- perhaps Atmel
  can be convinced to publish an official matrix for that.

. Specify EECR in the config file where required.  Obviously, only
  locations that differ from the 0x3c default are mentioned in the
  XML files, so by now, this only affects the AT90CAN128 for us.

. After clarification with Atmel, EnablePageProgramming should really
  default to 1, and only cleared if specified by an XML parameter.  So
  far, only the XML files for the ATmega256x and ATmega406 do specify
  it at all, and they specify a 1, too.

. Drop the entire OCDEN fuse heuristic.  If OCDEN is unprogrammed at
  startup, issue a warning that single-byte EEPROM updates won't be
  possible.  Leave it to the user to program the fuse if desired.
  That way, we won't run into any issue of prematurely wearing out the
  hfuse EEPROM cell.  Interestingly enough, this also solved the
  problem of the target not restarting from scratch upon sign-off.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@461 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:06:23 +00:00
joerg_wunsch bfa4540470 I missed to commit the allowfullpagebitstream attributes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@456 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 21:04:55 +00:00
joerg_wunsch b49dc8f645 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
bdean 789333011b Add support for "Xilinx JTAG cable".
Contributed by: Tymm <tymm@booyaka.com>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@437 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:30:30 +00:00
bdean b5909a4070 Add support for the AT90CAN128. Not sure if all the instruction
encoding is correct, specifically the address bits don't exactly match
those of the preliminary datasheet that I have, but I don't see how
they could be right.  Tested with STK500 and it works there.
Instruction encodings have not been tested due to lack of a parallel
port on my Mac.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@436 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:24:39 +00:00
hinni 07c3b68841 avrdude.conf.in: Added support for ATtiny2313 (contributed by Bob Paddock)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@421 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-04 12:09:29 +00:00
joerg_wunsch 3f54c9771b Fix writing the efuse bits for the ATmega169. The original pattern
was based on a typo in the datasheet which Atmel agreed is going to be
fixed.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@420 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-25 14:28:26 +00:00
hinni b26c4652fc avrdude.conf.in: Added support for tiny13 (contributed by Pawel Moll), mega48 and mega88 (contributed by Galen Seitz)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@418 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-22 17:38:54 +00:00
bdean 94dfac9f86 Add the Futurlec programming cable definition.
Contributed by:  Gianmario.Scotti@nokia.com


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@406 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-27 15:16:16 +00:00
hinni 1fe6d367ce * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates
* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@398 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:36:44 +00:00
bdean 885d915a1c Add support for the Atmel Butterfly board which talks to the
Butterfly's supplied bootloader firmware.

Contributed by: Michael Mayer <michael-mayer@gmx.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@387 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 15:16:48 +00:00
bdean 8e75250c16 Config file cleanup and part additions:
* The second poll value for flash is corrected for all devices

  * Delays are corrected for all devices, I have a datasheet for on my
    harddisk

  * mega161 is added

  * avr910_devcode added for all devices except mega64, mega162,
    mega169 and mega8535. Numbers are taken from uisp-source.

Contributed by Jan-Hinnerk Reichert <jan-hinnerk_reichert@hamburg.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@382 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-20 04:05:53 +00:00
bdean ee43f2f071 Add ATmega64 part.
Contributed by Erik Christiansen <erik@dd.nec.com.au>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@378 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-14 04:43:55 +00:00
joerg_wunsch db673fe09d Add "fuse" and "lock" definitions for the AT90S8535. Actually, this is
stolen from the AT90S8515 since the datasheet says it's the same there.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@377 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-08 21:15:42 +00:00
arcanum 55b2a88358 *avrdude.conf.in: Fix for unterminated character error.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@375 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-10-13 21:20:01 +00:00
arcanum f3b606d616 * avrdude.conf.in: Add ATmega8515 definition.
Contributed by: Matthias Weißer <matthias@matwei.de>
	* NEWS: Add note about ATmega8515 definition.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@374 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-10-13 17:53:56 +00:00
bdean c6046e01ff Add new programmer config: ABCmini Board, contributed by Christian
Catchpole <trio@catchpole.net>.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@373 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-10-02 18:59:47 +00:00
bdean e1c2db2ab1 Add ATmega162 part definition.
Contributed by: Stephan Eisvogel <eisvogel@hawo.stw.uni-erlangen.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@368 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-08 14:51:28 +00:00
bdean 1015d6ab46 Update a few programmer entries (descriptions only).
Add the supported programmer list to the manual.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@343 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 18:31:08 +00:00
bdean b1106ed404 Add 'picoweb' programming cable programmer.
Contributed by Rune Christensen <rune.christensen@adslhome.dk>.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@334 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-07-22 01:29:19 +00:00
bdean 3f6564ba98 Add the 'sp12' (Steve Bolt's) programmer.
Submitted by Larry Barello <larryba@barello.net>.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@333 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-06-18 02:47:52 +00:00
bdean a16b1d35c0 Properly identify the "ALF" programmer.
Extend ATmega8 calibration memory to support all 4 calibration bytes.
Savannah bug #3835.  Submitted by Francisco T. A. Silva
<ftas@geodigitus.com.br>.

Add a few AVR910 programmer device codes.  Savannah bug #3569 - sorry
I can't tell who submitted this to give proper credit.

Add support for the ATtiny12.  Submitted by Pontifex <pontifex@isys.ca>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@332 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-06-17 21:35:39 +00:00
troth be7339ca94 * avrdude.conf.in: Add pagel and bs2 entries for at90s1200 device.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@328 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-14 03:54:17 +00:00
troth 1149aadc4d * avrdude.conf.in: Add avr decodes for devices known in avr910
firmware version 2.3.
Add missing stk500 devocde for 2343.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@322 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-02 16:23:30 +00:00
bdean fa68be629f Change deprecated 'devicecode' to 'stk500_devcode' and remove
extraneous carraige returns.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@312 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-17 22:50:41 +00:00
arcanum 9c960703c1 Change name of pony programmer to pony-stk200 to better describe the hw.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@311 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-17 17:34:01 +00:00
arcanum e5d13ed1ba Add ATtiny26 support submitted by Artur Lipowski <LAL@pro.onet.pl>.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@309 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-16 23:00:29 +00:00
arcanum 2bfb32f8a8 Add ATmega8535 support submitted by Alexander <apeter@gmx.de>
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@308 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-16 22:44:55 +00:00
bdean 6189880dd5 Add the ATmega32 part. This part definition was contributed by:
Daniel Williamson <dannyw@maconmgt.co.uk>
and
	Ruwan Jayanetti <rjayanetti@sri.crossvue.com>

The resulting part definition used was actually somewhat of a merge of
the two submitted definitions.

Thanks for the contributions!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@302 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-29 15:02:07 +00:00
troth 19c7e69151 * avrdude.conf.in: Fix typo for devicecode deprecation comment.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@295 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-18 05:49:29 +00:00
arcanum 0a1bdbc522 Add Bascom programmer. Submitted by Larry Barello <larryba@barrello.net>
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@294 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 17:57:55 +00:00
troth 58f2a417cb * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if
available.
* avr910.c (avr910_vfy_cmd_sent): New function.
(avr910_chip_erase): Add support for chip erase.
(avr910_enter_prog_mode): New function.
(avr910_leave_prog_mode): New function.
(avr910_initialize): Add code to select device type and enter prog mode.
(avr910_close): Leave programming mode before closing serial port.
(avr910_read_sig_bytes): New function.
(avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer.
* avrdude.conf.in: Add note about deprecating devicecode.
Change all occurences of devicecode to stk500_devcode.
Add avr910_devcode to a few parts for testing.
* avrpart.h (struct avrpart): Change devicecode field to stk500_devcode.
(struct avrpart): Add avr910_devcode field.
* config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens.
Generate an error if devicecode is found in the config file.
Handle parsing of avr910_devcode and stk500_devcode.
* lexer.l: Handle parsing of avr910_devcode and stk500_devcode.
* pgm.c: Initialize pgm->read_sig_bytes field.
* pgm.h: Add pgm->read_sig_bytes field.
* stk500.c: Use stk500_devcode instead of devicecode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@293 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 06:20:02 +00:00
troth ae3f4e852f * avrdude.conf.in: Add avr910 and pavr programmers.
* config_gram.y: Add parsing of avr910 programmer.
* lexer.l: Add avr910 token.
* avr910.c: [this is still work in progress]
Add some debug output.
Add probe for programmer presense.
* main.c: Set port to default_serial if programmer type is avr910.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@292 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-16 18:19:37 +00:00
joerg_wunsch 6d5ebff60a Add a definition for the popular Ponyprog dongle.
Submitted by:	Daniel Williamson <dannyw@maconmgt.co.uk>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@263 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 13:47:37 +00:00
bdean 21c0c54028 Fix device codes for at90s8515 and at90s8535.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@258 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 02:33:30 +00:00
bdean b52d86ae9d Add PAGEL and BS2 parms for parts I have datasheets for.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@257 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 01:42:57 +00:00
arcanum 91497f7ae8 Add AVR ISP programmer.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@251 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-04 16:28:25 +00:00
troth d0a60ef253 * ChangeLog: Point reader to the CHANGELOG file.
* Makefile.am (EXTRA_DIST): Rename avrdude.conf.sample to avrdude.conf.in.
	Remove avrdude.conf and distclean-local rules.
	Add install-exec-local and backup-avrdude-conf rules.
* avrdude.conf.in:
	Set default_parallel to "@DEFAULT_PAR_PORT@" for autoconf expansion.
	Set default_serial to "@DEFAULT_SER_PORT@" for autoconf expansion.
* configure.ac: Add call to AC_CANONICAL_{BUILD,HOST,TARGET} macros.
	Set DEFAULT_PAR_PORT and DEFAULT_SER_PORT based on $host.
	Add copyright header.
	Define avrdude_version so AC_INIT and AM_INIT_AUTOMAKE are sure
	to get the same version.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@238 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-25 00:57:27 +00:00
troth 5736f5d766 Renamed avrdude.conf.sample to avrdude.conf.in.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@237 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-25 00:53:22 +00:00