Commit Graph

193 Commits

Author SHA1 Message Date
Joerg Wunsch b35ab14409 Add support for the ATmega164/324/644.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@475 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-14 20:18:42 +00:00
Joerg Wunsch d16ca35686 Fix broken page/intrapage address bit assignments for the ATmega649x.
Now loading flash works on these devices even for simple parallel ISP
adapters.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@474 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-13 21:24:06 +00:00
Joerg Wunsch 79994f82b7 Add support for the ATmega329x/649x chips. Note that STK500v1 is not
officially supported for this device.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@473 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-11 21:27:09 +00:00
Joerg Wunsch 5b7a7a5711 Add an "jtag2fast" programmer that connects to the JTAG ICE at 115200 Bd.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@463 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-14 07:57:24 +00:00
Joerg Wunsch a5a700f7a1 Quite some cleanup of the JTAG ICE mkII stuff.
. Implement the new EECRAddress field in the device descriptor that is
  required by the 4.x firmware; make an uneducated guess about what
  firmware requires what length of device descriptor -- perhaps Atmel
  can be convinced to publish an official matrix for that.

. Specify EECR in the config file where required.  Obviously, only
  locations that differ from the 0x3c default are mentioned in the
  XML files, so by now, this only affects the AT90CAN128 for us.

. After clarification with Atmel, EnablePageProgramming should really
  default to 1, and only cleared if specified by an XML parameter.  So
  far, only the XML files for the ATmega256x and ATmega406 do specify
  it at all, and they specify a 1, too.

. Drop the entire OCDEN fuse heuristic.  If OCDEN is unprogrammed at
  startup, issue a warning that single-byte EEPROM updates won't be
  possible.  Leave it to the user to program the fuse if desired.
  That way, we won't run into any issue of prematurely wearing out the
  hfuse EEPROM cell.  Interestingly enough, this also solved the
  problem of the target not restarting from scratch upon sign-off.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@461 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:06:23 +00:00
Joerg Wunsch bf8d7260df I missed to commit the allowfullpagebitstream attributes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@456 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 21:04:55 +00:00
Joerg Wunsch 04831af970 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
Brian S. Dean 9a0e4afb9a Add support for "Xilinx JTAG cable".
Contributed by: Tymm <tymm@booyaka.com>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@437 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:30:30 +00:00
Brian S. Dean 15a0e05a7b Add support for the AT90CAN128. Not sure if all the instruction
encoding is correct, specifically the address bits don't exactly match
those of the preliminary datasheet that I have, but I don't see how
they could be right.  Tested with STK500 and it works there.
Instruction encodings have not been tested due to lack of a parallel
port on my Mac.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@436 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:24:39 +00:00
Jan-Hinnerk Reichert 66ce0f3cf4 avrdude.conf.in: Added support for ATtiny2313 (contributed by Bob Paddock)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@421 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-04 12:09:29 +00:00
Joerg Wunsch bc055e0fb6 Fix writing the efuse bits for the ATmega169. The original pattern
was based on a typo in the datasheet which Atmel agreed is going to be
fixed.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@420 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-25 14:28:26 +00:00
Jan-Hinnerk Reichert 91d893eb52 avrdude.conf.in: Added support for tiny13 (contributed by Pawel Moll), mega48 and mega88 (contributed by Galen Seitz)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@418 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-22 17:38:54 +00:00
Brian S. Dean 9c1f837677 Add the Futurlec programming cable definition.
Contributed by:  Gianmario.Scotti@nokia.com


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@406 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-27 15:16:16 +00:00
Jan-Hinnerk Reichert 816ff2623e * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates
* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@398 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:36:44 +00:00
Brian S. Dean bceb249858 Add support for the Atmel Butterfly board which talks to the
Butterfly's supplied bootloader firmware.

Contributed by: Michael Mayer <michael-mayer@gmx.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@387 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 15:16:48 +00:00
Brian S. Dean 578b25d1e2 Config file cleanup and part additions:
* The second poll value for flash is corrected for all devices

  * Delays are corrected for all devices, I have a datasheet for on my
    harddisk

  * mega161 is added

  * avr910_devcode added for all devices except mega64, mega162,
    mega169 and mega8535. Numbers are taken from uisp-source.

Contributed by Jan-Hinnerk Reichert <jan-hinnerk_reichert@hamburg.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@382 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-20 04:05:53 +00:00
Brian S. Dean 965b0f52bc Add ATmega64 part.
Contributed by Erik Christiansen <erik@dd.nec.com.au>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@378 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-14 04:43:55 +00:00
Joerg Wunsch 595d056a91 Add "fuse" and "lock" definitions for the AT90S8535. Actually, this is
stolen from the AT90S8515 since the datasheet says it's the same there.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@377 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-08 21:15:42 +00:00
Eric Weddington 1c031377ec *avrdude.conf.in: Fix for unterminated character error.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@375 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-10-13 21:20:01 +00:00
Eric Weddington 1ec1035415 * avrdude.conf.in: Add ATmega8515 definition.
Contributed by: Matthias Weißer <matthias@matwei.de>
	* NEWS: Add note about ATmega8515 definition.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@374 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-10-13 17:53:56 +00:00
Brian S. Dean 49bfb04591 Add new programmer config: ABCmini Board, contributed by Christian
Catchpole <trio@catchpole.net>.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@373 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-10-02 18:59:47 +00:00
Brian S. Dean 5a7b88a1a9 Add ATmega162 part definition.
Contributed by: Stephan Eisvogel <eisvogel@hawo.stw.uni-erlangen.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@368 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-08 14:51:28 +00:00
Brian S. Dean 882b0c8c05 Update a few programmer entries (descriptions only).
Add the supported programmer list to the manual.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@343 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 18:31:08 +00:00
Brian S. Dean 1c0432c52d Add 'picoweb' programming cable programmer.
Contributed by Rune Christensen <rune.christensen@adslhome.dk>.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@334 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-07-22 01:29:19 +00:00
Brian S. Dean 1af1e889a1 Add the 'sp12' (Steve Bolt's) programmer.
Submitted by Larry Barello <larryba@barello.net>.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@333 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-06-18 02:47:52 +00:00
Brian S. Dean e9b255689c Properly identify the "ALF" programmer.
Extend ATmega8 calibration memory to support all 4 calibration bytes.
Savannah bug #3835.  Submitted by Francisco T. A. Silva
<ftas@geodigitus.com.br>.

Add a few AVR910 programmer device codes.  Savannah bug #3569 - sorry
I can't tell who submitted this to give proper credit.

Add support for the ATtiny12.  Submitted by Pontifex <pontifex@isys.ca>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@332 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-06-17 21:35:39 +00:00
Theodore A. Roth fa3b29b68b * avrdude.conf.in: Add pagel and bs2 entries for at90s1200 device.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@328 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-14 03:54:17 +00:00
Theodore A. Roth 6533623489 * avrdude.conf.in: Add avr decodes for devices known in avr910
firmware version 2.3.
Add missing stk500 devocde for 2343.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@322 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-02 16:23:30 +00:00
Brian S. Dean 67ac6368f0 Change deprecated 'devicecode' to 'stk500_devcode' and remove
extraneous carraige returns.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@312 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-17 22:50:41 +00:00
Eric Weddington bc0c3f4c61 Change name of pony programmer to pony-stk200 to better describe the hw.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@311 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-17 17:34:01 +00:00
Eric Weddington f94e6d0f4b Add ATtiny26 support submitted by Artur Lipowski <LAL@pro.onet.pl>.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@309 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-16 23:00:29 +00:00
Eric Weddington 83f5588f0e Add ATmega8535 support submitted by Alexander <apeter@gmx.de>
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@308 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-16 22:44:55 +00:00
Brian S. Dean d5dee86c58 Add the ATmega32 part. This part definition was contributed by:
Daniel Williamson <dannyw@maconmgt.co.uk>
and
	Ruwan Jayanetti <rjayanetti@sri.crossvue.com>

The resulting part definition used was actually somewhat of a merge of
the two submitted definitions.

Thanks for the contributions!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@302 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-29 15:02:07 +00:00
Theodore A. Roth 0c1039d8b3 * avrdude.conf.in: Fix typo for devicecode deprecation comment.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@295 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-18 05:49:29 +00:00
Eric Weddington f8c7539f7b Add Bascom programmer. Submitted by Larry Barello <larryba@barrello.net>
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@294 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 17:57:55 +00:00
Theodore A. Roth 3782460fb5 * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if
available.
* avr910.c (avr910_vfy_cmd_sent): New function.
(avr910_chip_erase): Add support for chip erase.
(avr910_enter_prog_mode): New function.
(avr910_leave_prog_mode): New function.
(avr910_initialize): Add code to select device type and enter prog mode.
(avr910_close): Leave programming mode before closing serial port.
(avr910_read_sig_bytes): New function.
(avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer.
* avrdude.conf.in: Add note about deprecating devicecode.
Change all occurences of devicecode to stk500_devcode.
Add avr910_devcode to a few parts for testing.
* avrpart.h (struct avrpart): Change devicecode field to stk500_devcode.
(struct avrpart): Add avr910_devcode field.
* config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens.
Generate an error if devicecode is found in the config file.
Handle parsing of avr910_devcode and stk500_devcode.
* lexer.l: Handle parsing of avr910_devcode and stk500_devcode.
* pgm.c: Initialize pgm->read_sig_bytes field.
* pgm.h: Add pgm->read_sig_bytes field.
* stk500.c: Use stk500_devcode instead of devicecode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@293 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 06:20:02 +00:00
Theodore A. Roth 63d0ccdd19 * avrdude.conf.in: Add avr910 and pavr programmers.
* config_gram.y: Add parsing of avr910 programmer.
* lexer.l: Add avr910 token.
* avr910.c: [this is still work in progress]
Add some debug output.
Add probe for programmer presense.
* main.c: Set port to default_serial if programmer type is avr910.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@292 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-16 18:19:37 +00:00
Joerg Wunsch f24f899338 Add a definition for the popular Ponyprog dongle.
Submitted by:	Daniel Williamson <dannyw@maconmgt.co.uk>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@263 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 13:47:37 +00:00
Brian S. Dean f8d2ad4d3d Fix device codes for at90s8515 and at90s8535.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@258 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 02:33:30 +00:00
Brian S. Dean 13f9f58c22 Add PAGEL and BS2 parms for parts I have datasheets for.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@257 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 01:42:57 +00:00
Eric Weddington b7da9366e6 Add AVR ISP programmer.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@251 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-04 16:28:25 +00:00
Theodore A. Roth e1fec80b10 * ChangeLog: Point reader to the CHANGELOG file.
* Makefile.am (EXTRA_DIST): Rename avrdude.conf.sample to avrdude.conf.in.
	Remove avrdude.conf and distclean-local rules.
	Add install-exec-local and backup-avrdude-conf rules.
* avrdude.conf.in:
	Set default_parallel to "@DEFAULT_PAR_PORT@" for autoconf expansion.
	Set default_serial to "@DEFAULT_SER_PORT@" for autoconf expansion.
* configure.ac: Add call to AC_CANONICAL_{BUILD,HOST,TARGET} macros.
	Set DEFAULT_PAR_PORT and DEFAULT_SER_PORT based on $host.
	Add copyright header.
	Define avrdude_version so AC_INIT and AM_INIT_AUTOMAKE are sure
	to get the same version.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@238 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-25 00:57:27 +00:00
Theodore A. Roth 265a6b1989 Renamed avrdude.conf.sample to avrdude.conf.in.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@237 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-25 00:53:22 +00:00