Commit Graph

2188 Commits

Author SHA1 Message Date
MCUdude bfdad78fcb Add EEPROM dummy read 2022-07-19 23:44:22 +02:00
Stefan Rueger db37c9d286 Extend rather than reset memory entries in avrdude.conf
This commit changes the philosophy whenever avrdude.conf encounters the
same memory of a part for the second time or whenever a memory is
described that, through inheritance, already existed: AVRDUDE no longer
zaps the memory, it rather extends it.

Therefore, avrdude.conf.in's entry for ATmega128RFA1, which inherits from
the ATmega2561, needs a line `load_ext_addr = NULL;` in its flash memory
description to zap the inherited load_ext_addr SPI command.

Other than this, avrdude.conf.in needs no other change in order to effect
the same internal representation proving earlier updates to the .conf.in
file correct that manually ensured inheritance of memory contents.
2022-07-19 20:00:17 +01:00
Stefan Rueger bdb5ba6055 Add avrdude.conf syntax ((pp|hvsp)_controlstack|(eeprom|flash)_instr) = NULL; 2022-07-19 16:16:55 +01:00
Stefan Rueger 1555906604 Add avrdude.conf syntax memory "name" = NULL; 2022-07-19 15:58:40 +01:00
Stefan Rueger 8503f2d2d5 Add avrdude.conf syntax opcode = NULL; for SPI programming 2022-07-19 15:38:54 +01:00
Stefan Rueger f8b6a246ef Add in lexer.l capability to scan negative decimal integers or reals 2022-07-19 15:17:00 +01:00
Stefan Rueger bb6e1bbaec Add avrdude.conf new syntax: readback = 0x80 0x7f; 2022-07-19 15:01:51 +01:00
Stefan Rueger 8da9c2bbf6 Correct bit number for lone 'a' in config_gram.y
When an SPI command has a lone 'a' the initialisation now is as would be
expected by all commands that take an address. Atmel's opcodes for SPI
programming are consistent in this respect. This commit makes specifying
the bit number in avrdude.conf optional. Instead of

 read_lo = "0 0 1 0 0 0 0 0  0 0 a13 a12 a11 a10 a9 a8  a7 a6 a5 a4 a3 a2 a1 a0  o o o o o o o o";

one can now use

 read_lo = "0 0 1 0 0 0 0 0  0 0 a a a a a a  a a a a a a a a  o o o o o o o o";
2022-07-19 14:46:08 +01:00
Stefan Rueger 8989e6515b Change macros __f() to _f() and adapt to config_file and hvupdi changes 2022-07-19 14:38:34 +01:00
Stefan Rueger 43e2955c61
Merge branch 'avrdudes:main' into partdesc 2022-07-19 13:20:25 +01:00
Stefan Rueger affe4cb50a
Merge pull request #1034 from stefanrueger/config_file
Cache config_file components in AVRPART and PROGRAMMER structures
2022-07-19 13:05:42 +01:00
Stefan Rueger 3b5a1f63c6
Merge branch 'avrdudes:main' into partdesc 2022-07-19 12:57:13 +01:00
Stefan Rueger 3c05fe6412
Merge branch 'avrdudes:main' into config_file 2022-07-19 12:33:12 +01:00
Stefan Rueger e52bd2b99b Move realpath() compatibility definition from config_gram.y to config.h 2022-07-19 08:05:42 +01:00
Stefan Rueger eba67e56fc Make realpath() available for MSC and MINGW32 2022-07-19 07:42:44 +01:00
Stefan Rueger f95a1d3448 Cache config_file components in AVRPART and PROGRAMMER structures
Some 90% of the space of AVRPART and some 50% of PROGRAMMER is occupied by a
4 kB array config_file[] that contains the configuration file name. In
preparation of developer options that output a raw dump of the part
descriptions, this commit changes the config_file components from a large
array, which is duplicated in each part and programmer description, to a
cached string for each config file allowing for smaller raw dumps.

This commit also changes the config file name to its realpath(), eg, shortens
unwarranted `/bin/../etc/` file name components. It also changes the global
variable names `infile` and `fileno` to cfg_infile and cfg_fileno for an ever
so slight improvement of code clarity.
2022-07-18 18:10:09 +01:00
Stefan Rueger 0e7c1512e4 Avoid the warning: enumeration value ‘CONNTYPE_SPI’ not handled in switch 2022-07-18 17:34:06 +01:00
MCUdude ec467c465e Ignore -s flag as safemode is no longer supported
Resolves #1032
2022-07-18 17:13:10 +02:00
Stefan Rueger 068e78e832
Merge branch 'avrdudes:main' into partdesc 2022-07-18 16:02:01 +01:00
Stefan Rueger 87401d341e
Merge branch 'main' into main 2022-07-18 15:56:43 +01:00
Stefan Rueger a5552f64cf Update NEWS 2022-07-18 14:38:37 +01:00
Stefan Rueger 6e5bf3bc8d
Merge pull request #1029 from stefanrueger/issue992
Fix usbtiny read/verify for parts with more than 64 kB flash
2022-07-18 14:32:15 +01:00
Stefan Rueger 494199fa78
Merge pull request #1025 from stefanrueger/terminal
Fix terminal write edge cases; add one read mode and add quell command
2022-07-18 14:30:45 +01:00
Stefan Rueger 6fa7400e4e
Merge pull request #1015 from MCUdude/hv-updi
Add support for high-voltage UPDI
2022-07-18 14:28:39 +01:00
Stefan Rueger 1d3a7591ea
Merge pull request #933 from MCUdude/linuxspi-default-port-fix
Fix linuxspi default port
2022-07-18 14:25:52 +01:00
MCUdude 5904611928 Apply jtagmki patch provided in #443 2022-07-17 12:51:43 +02:00
Stefan Rueger 79921e52dc Provide file format I: Intel HEX with comments that ignores checksum errors
The new file type I is essentially Intel HEX that, on download, inserts
comments next to data records with the resolved effective address and an
ASCII dump of that same record. On upload the `I` format is permissive
with respect to check sum errors, eg, after manipulated an Intel HEX file
for debugging.
2022-07-16 23:40:36 +01:00
Stefan Rueger d05ddd188d Fix usbtiny read/verify for parts with more than 64 kB flash
Usbtiny has a protocol or firmware problem that prevents it from reading
flash above 64 kB in page mode (used by -U flash:r:... and -U flash✌️...).
This commit fixes that problem by falling back on byte access for flash paged
reads above 64k. It also issues the correct load extended address command for
parts with more than 128 kB flash thus extending support to ATmega2560 et al.
2022-07-16 11:06:18 +01:00
Stefan Rueger e7e062ec05 Fix terminal line parsing for strings (to some extent) 2022-07-15 18:50:20 +01:00
Stefan Rueger 7ceb163cba Echo terminal command line on Apple 2022-07-14 18:31:44 +01:00
Stefan Rueger 14b27726d4 Protect terminal dump from vagaries of C libray implementation of isalpha() etc
Some C libraries assign true to isalpha(0xff), isdigit(0xff) or
ispunct(0xff), which means that the Operating System terminal sees a
character 0xff which it may not have a useful display character for.

This commit only outputs printable ASCII characters for an AVRDUDE
terminal dump reducing the risk of the OS terminal not being able
to print the character properly.
2022-07-14 17:16:30 +01:00
Stefan Rueger 5721908e63 Revert to double/float only in terminal write and clarify usage 2022-07-14 17:13:13 +01:00
MCUdude dde35018eb Exit if programmer can't send HV pulse to target 2022-07-13 23:49:14 +02:00
Stefan Rueger 901d49c4e6 Change terminal write usage message to accommodate long double 2022-07-13 12:37:10 +01:00
Stefan Rueger b02cce38d7 Added long double data type for terminal write 2022-07-13 12:25:09 +01:00
Stefan Rueger 0b3a5781fc Flush stderr and stdout with all terminal error messages
Error messages are written to stderr whilst normal terminal output is stdout.
When redirecting output to pipelines or files these two streams can get
separated as they are buffered separately. To avoid this, term.c now provides
a function terminal_message() that works just like avrdude_message() but
flushes stderr and stdout before printing on stderr, and it flushes stderr
afterwards.

This commit replaces all avrdude_message() calls except for progress report
with terminal_message() to ensure stdout and stderr streams keep together.
2022-07-13 11:48:29 +01:00
Stefan Rueger 1efbc64922 Add terminal_setup_update_progress() library interface to term.c
This enables the new quell terminal command to switch on and off progress
reports to the terminal. The code for this was moved from main.c to term.c.

It can be used as library call for other frontends than main.c
2022-07-13 11:38:43 +01:00
Stefan Rueger ea226936b7 Fix isspace() and other isxxx() calls in term.c 2022-07-13 11:19:21 +01:00
Stefan Rueger f8145ae1c4 Echo >>> terminal command line for Windows or non-libreadline 2022-07-12 21:53:37 +01:00
Stefan Rueger 5690352676
Merge branch 'avrdudes:main' into main 2022-07-12 18:19:57 +01:00
Stefan Rueger 3ef8122d90
Merge branch 'avrdudes:main' into partdesc 2022-07-12 18:19:17 +01:00
Stefan Rueger feb38b83ef
Merge branch 'avrdudes:main' into terminal 2022-07-12 18:18:39 +01:00
Hans dc6c10dc6c
Merge pull request #3 from janegilruud/hv-updi
Clean up and simplify hvupdi handling, and set default hvupdi_variant
2022-07-12 19:09:07 +02:00
Stefan Rueger c81f52ff10 Update NEWS 2022-07-12 15:52:37 +01:00
Stefan Rueger 09a95a3717
Merge pull request #936 from stefanrueger/issue918
Fix Issue #918: Enable avrdude to send full input file incl trailing 0xff
2022-07-12 15:34:17 +01:00
Stefan Rueger b6204b181a Provide echo of terminal command line prompt under Windows 2022-07-12 15:22:52 +01:00
Stefan Rueger 0edb77bdf8
Merge branch 'main' into issue918 2022-07-12 15:05:45 +01:00
Stefan Rueger 04f790ad85
Merge pull request #1018 from stefanrueger/issue995
Fix Issue #995 ft245r paged read for ATmega2560 et al
2022-07-12 14:55:44 +01:00
Stefan Rueger e867486f3f
Merge pull request #1023 from stefanrueger/issue1004
Fix PICKit2 ATmega2560 flash paged flash read
2022-07-12 14:51:56 +01:00
Stefan Rueger 1e8b56751e Add quell command in terminal
Sets the quell_progress global variable that can be, and is, consulted by
programmers.

Setting quell_progress to a positive number also switches off progress
bars. It is currently not possible to switch on progress bars again: that
is enabled in main.c once at the start of AVRDUDE.

That code in main should move to avr.c to enable report_update() to consult
quell_progress directly. Will do at another time when touching main.c and
avr.c. smr
2022-07-12 13:19:09 +01:00