Commit Graph

77 Commits

Author SHA1 Message Date
joerg_wunsch be5fe6bf70 Add Darell's email address, so it's consistent with the other authors.
Add the forgotten tpi.h file.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@978 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-24 07:40:48 +00:00
joerg_wunsch 6431eece98 Submitted by Darell Tan:
patch #7244: TPI bitbang implementation
* bitbang.c: Add TPI bitbang stuff.
* bitbang.h: (Ditto.)
* avr.c: (Ditto.)
* avr.h: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* serbb_posix.c: Wire bitbang_cmd_tpi into the struct pgm.
* serbb_win32.c: (Ditto.)
* par.c: (Ditto.)
* doc/avrdude.texi: Document the TPI bitbang support.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@976 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-23 21:03:36 +00:00
joerg_wunsch 814ff25d79 Various fixes for Xmega devices.
* avrdude.conf.in: Correctly declare EEPROM page sizes for
all Xmega devices (0x20 instead of 0x100).
* avr.c: If a memory region has a page size declared, try
using the paged IO routines regardless of the target memory
name.  Xmega EEPROM requires to be written in paged mode.
Correctly use a long (rather than unsigned long) variable to
evaluate the success status of the paged mode write attempt.
* stk500v2.c: Don't apply TIF space offsets twice (bug #27995:
AVRDUDE 5.8svn fails to program and read XMEGA); use
stk500v2_loadaddr() prior to paged mode (EEPROM and flash) writes,
otherwise programming of flash areas will fail; while being there,
check the return value of stk500v2_loadaddr() everywhere; use the
correct write/erase mode bits (same as AVR Studio does).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@907 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-12 15:42:40 +00:00
joerg_wunsch 366db1ab6e Contributed by Zoltan Laday:
patch #6825: xmega problems with JTAGICEmkII
* jtagmkII.c: Many fixes for Xmega devices.
* jtagmkII_private.h: Add various new constants required for
Xmega devices.
* avrdude.conf.in: New devices: ATXMEGA64A1, ATXMEGA192A1,
ATXMEGA256A1, ATXMEGA64A3, ATXMEGA128A3, ATXMEGA192A3,
ATXMEGA256A3, ATXMEGA256A3B, ATXMEGA16A4, ATXMEGA32A4,
ATXMEGA64A4, ATXMEGA128A4
* avr.c (avr_read, avr_write): Add more names for (Xmega)
memory areas that require paged operation.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@821 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-06-24 21:32:12 +00:00
joerg_wunsch 15fc8af421 First implementation of ATxmega support. By now, only the
PDI mode of the STK600 is supported.  Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 22:53:40 +00:00
joerg_wunsch 036bfc95b5 In avr_read() and avr_write(), only use the paged_load and
paged_write backend functions iff the memory area in question has
a page_size != 0.

This is supposed to fix bug #19234: avrdude-5.3.1 segfaults when
stk500v1 tries to program an ATtiny15


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@739 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-05-16 20:15:13 +00:00
joerg_wunsch 07c1079415 Major code cleanup.
- Make all internal functions "static".
- Make sure each module's header and implementation file match.
- Remove all library-like functionality from main.c, so only
  the actual frontend remains in main.c.
- Add C++ brackets to all header files.

That effectively leaves the various module C files as something like
an "avrdude library", with main.c being the currently only frontend
program for that library.  In theory, it should be possible to write
different frontends using the same library backend functions though.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@722 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 22:43:46 +00:00
joerg_wunsch 1cae809b9b Something I always wanted to do: replace all those private "extern"
declarations in each file by a central header file "avrdude.h".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 21:07:54 +00:00
joerg_wunsch 6cd309f1c0 Actually return the number of bytes read or written in avr_read() or
avr_write(), respectively, in case the paged_load()/paged_write()
methods succeeded, rather than only 0.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@696 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 14:06:52 +00:00
joerg_wunsch 4beee5ff79 Fix a bug introduced in rev. 1.69, when implementing the
fallback from each programmer's paged_load() or paged_write()
method, respectively.  The return value needs to be checked for
being greater or equal than 0 rather equal to 0 in order to
assume the operation has been successful.

Fixes bug #18489: avrdude is too slow (20 byte/s)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@695 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 14:01:54 +00:00
joerg_wunsch aef8e953ab In avr_read() and avr_write(), if the paged access returns a
failure, fall back to byte access.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@692 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-23 07:02:22 +00:00
joerg_wunsch 351f329ec8 Replace the fallback of avr_read_byte() and avr_write_byte() to
avr_read_byte_default() and avr_write_byte_default (resp.) by directly
calling the latter functions from within all programmers that don't
implement their own read_byte()/write_byte() methods.  In turn, make the
read_byte() and write_byte() methods mandatory, and the cmd() method
(direct ISP command) optional instead (it's effectively mandatory for
any programmer using avr_read_byte_default()/avr_write_byte_default()
though).  Remove all the pointless cmd() method stubs from those programmers
that don't need it.

Eliminate avr_read_byte() as it was now completely identical to
pgm->read_byte().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@684 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 15:04:09 +00:00
joerg_wunsch 3df4c5f888 * avrdude.conf.in: Add page mode parameters for all "eeprom" memory
definitions that are organized in pages.

* avr.c (avr_write_byte_default): Consider using the loadpage
instructions only if the respective memory is marked "paged".

Closes bug #17199: EEPROM fails verification on ATmega645 with
pony-stk200 hardware
Closes bug #16849: EEPROM write fails for AT90USB1287 with mode 0x41
Closes bug #15146: stk500v2_paged_write: loadpage instruction not
defined for part


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@622 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-22 22:05:19 +00:00
joerg_wunsch ebdce5f3ef Start implementing support for ATmega256x;
jtag2 and bitbang programmers are working, stk500v2
still needs to be done.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@581 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-05-23 22:27:43 +00:00
bdean df27d4e06a All declarations need to be at the top of the block.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@520 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-21 01:26:54 +00:00
bdean d53e6d7b25 This is Colin O'Flynn's mega patch for updating safemode support:
* add support for parts with just 'fuse' memory

    * if any fuse memories are altered, reflect those changes in the
      post-programming safemode check so that safemode no longer
      complains about fuses which were intentionally altered; this
      eliminates the need to completely disable safemode using -u in
      order to program fuses.

    * provide -s option which will not ask to restore fuses, it will
      just do it

Submitted by: Colin O'Flynn <coflynn@newae.com>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@519 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-21 00:20:32 +00:00
bdean e4f8608da4 Update code copyrights.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@438 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:52:45 +00:00
hinni 10272c5a55 Removed unnecessary includes of config.h
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@426 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-05 15:04:19 +00:00
hinni 2a725d152f *main.c,avr.c,avr.h,par.c,stk500.c: Add function avr_chip_erase() to unify handling of cycle-count. Makes cycle-count work for avr910-programmers
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@394 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:04:54 +00:00
hinni c5d2aafb12 *avrpart.c,avr.c: Moved elementary functions on types OPCODE, AVRMEM and AVRPART from avr.c to new file avrpart.c
*avr.h: Removed prototypes for moved functions
*avrpart.h: Added prototypes for functions in avrpart.c
*Makefile.am: Added new file avrpart.c


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@388 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 16:42:10 +00:00
troth a8b0ee3820 * avr.c (avr_write_byte_default): Improve polling algorithm to speed up
programming of byte oriented parallel programmers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@380 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-19 18:11:59 +00:00
troth 3827320f15 * avr.c (avr_read_byte): If pgm->read_byte method fails, retry with
avr_read_byte_default.
* avr.c (avr_write_byte): If pgm->write_byte method fails, retry with
avr_write_byte_default.
* avr910.c (avr910_cmd): Implement using universal command.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@364 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-05 16:40:55 +00:00
troth 5bf7290268 * avr.c:
* avr.h:
* avr910.c:
* main.c:
* stk500.c:
New progress reporting implementation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@337 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-07-29 22:08:21 +00:00
bdean 945358b4b3 Optimize flash memory handling a little bit by ignoring 0xff data that
resides above the last non-0xff data value in the address space.  Only
do this for flash memory since writing a 0xff to flash is a no-op.
This has the affect of creating smaller output files when dumping
memory contents from flash if the program in flash does not consume
the whole memory space.  It also results in shorter programming times
when avrdude is asked to load a file into flash that has lots of 0xff
filled data past the last non-0xff data value.

I think this is basically where Alexey was going with his s-record
routine, but this should have a similar affect for all the I/O
routines.  The main difference is that Alexey's also optimized 0xff
from the beginning of the address space and was not limited to flash.

I think that these optimizations should be limited to the flash since
it is currently the only memory that treats 0xff as special.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@331 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-22 02:33:17 +00:00
troth 5e3a9fc279 * avr.c (avr_write): Add call to pgm->write_setup() before the write loop.
* avr910.c: Change all show_func_info() calls to no_show_func_info().
Add read/write to/from flash/eeprom memory functionality.
* pgm.c: Initialize pgm->write_setup.
* pgm.h: Add write_setup field to PROGRAMMER structure.
* ser_posix.c: Remove unneeded cast in verbosity code.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@299 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-24 07:09:16 +00:00
troth 3a85c3c92a * avr.c: Add avr_read_byte_default().
Have avr_read_byte() call pgm->read_byte() or avr_read_byte_default().
Add avr_write_byte_default().
Have avr_write_byte() call pgm->write_byte or avr_write_byte_default().
* pgm.c: Initialize pgm->write_byte and pgm->read_byte.
* pgm.h: Add write_byte and read_byte fields to struct programmer_t.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@296 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-23 23:22:50 +00:00
troth 58f2a417cb * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if
available.
* avr910.c (avr910_vfy_cmd_sent): New function.
(avr910_chip_erase): Add support for chip erase.
(avr910_enter_prog_mode): New function.
(avr910_leave_prog_mode): New function.
(avr910_initialize): Add code to select device type and enter prog mode.
(avr910_close): Leave programming mode before closing serial port.
(avr910_read_sig_bytes): New function.
(avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer.
* avrdude.conf.in: Add note about deprecating devicecode.
Change all occurences of devicecode to stk500_devcode.
Add avr910_devcode to a few parts for testing.
* avrpart.h (struct avrpart): Change devicecode field to stk500_devcode.
(struct avrpart): Add avr910_devcode field.
* config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens.
Generate an error if devicecode is found in the config file.
Handle parsing of avr910_devcode and stk500_devcode.
* lexer.l: Handle parsing of avr910_devcode and stk500_devcode.
* pgm.c: Initialize pgm->read_sig_bytes field.
* pgm.h: Add pgm->read_sig_bytes field.
* stk500.c: Use stk500_devcode instead of devicecode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@293 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 06:20:02 +00:00
bdean 86dbad54c5 Fix stk500 page write (Program Page command). This is supported after
all on non-paged-memory parts.  The problem was that the page size was
defaulting to 256 (maximum for the stk500), but the timeout for a
response from the stk500 before declaring it dead was only 0.5
seconds.  But it takes much longer than 0.5 seconds to program 256
bytes, so we just weren't waiting long enough.

Fix this in two ways - increase the timeout to 5 seconds, and decrease
the page size to 16 bytes for non-paged parts.  The programming time
for 16 bytes is short enough to provide the user with some feedback
that something is happening.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@260 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 04:30:20 +00:00
bdean 6e9bdf2a6e Don't call the programmer's 'paged_write' routine unless the memory
itself is paged as it doesn't appear to work otherwise.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@259 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-05 02:35:50 +00:00
bdean 66d2a710db Add the ability to read a per-user config file located at
$HOME/.avrduderc.  Entries from .avrduderc take precedence over those
from the system wide config file in ${PREFIX}/etc/avrdude.conf.

Track and display the config file name and line number when we print
out the available parts and programmers.  This is useful in case
someone has overridden a definition in their .avrduderc file and is
wondering why the definition in the system wide config file is not
being used.

Remove the default programmer 'stk500' from the distributed config
file.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@222 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-22 16:45:13 +00:00
bdean 2367f41d5f Add the ability to specify which pin to pulse when retrying entry into
programming mode.  Use 'retry_pulse' in the per-part specification
that can currently take values of 'reset' or 'sck', the default being
'sck' which preserves the previous behaviour.  Some newer parts
indicate that /RESET should be pulsed, while older parts say to pulse
SCK.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@212 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-21 17:24:47 +00:00
bdean 36195d4655 Add 'serial' and 'parallel' keywords to the grammar so that one can
say whether parts support these programming modes or not.  Possible
values for 'serial' are 'yes' or 'no'.  Possible values for 'parallel'
are 'yes', 'no', or 'pseudo'.  Add a bit mask of flags to the AVRPART
structure to capture these settings.  Use these within
stk500_initialize() to set the device parameters correctly.

Defaults for 'serial' and 'parallel' are 'yes' unless specified
otherwise.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@208 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-20 19:46:23 +00:00
bdean 9de52d215d Add a few parameters needed for parallel programming: assignment of
PAGEL and BS2 signals and the disposition of the reset pin
('dedicated' or 'io').


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@202 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-20 14:11:34 +00:00
troth 1997cc5188 These changes add basic support for a autoconf/automake based build system.
* .cvsignore: Ignore autoconf files.
	* AUTHORS: New file.
	* ChangeLog: New file.
	* Makefile: Removed file.
	* Makefile.am: New file.
	* NEWS: New file.
	* README: New file.
	* bootstrap: New file.
	* configure.ac: New file.
	* avr.c: Include ac_cfg.h (generated by autoconf).
	* config.c: Include ac_cfg.h.
	Include config_gram.h instead of y.tab.h.
	* config.h: If HAS_YYSTYPE is not defined, define YYSTYPE.
	* config_gram.y: Include ac_cfg.h.
	* fileio.c: Include ac_cfg.h.
	* lexer.l: Include config_gram.h instead of y.tab.h.
	* lists.c: Include ac_cfg.h.
	* main.c: Include ac_cfg.h.
	* par.c: Include ac_cfg.h.
	* pgm.c: Include ac_cfg.h.
	* ppi.c: Include ac_cfg.h.
	* stk500.c: Include ac_cfg.h.
	* term.c: Include ac_cfg.h.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@192 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-14 20:34:03 +00:00
bsd 2c651eb7bf Makefile: include a target to automatically generate the dependency
list.

All others


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@177 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-08 04:17:25 +00:00
bsd b7c08f5901 Re-license using the GNU GPL. Thanks to Ted Roth for the patch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@172 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 19:08:33 +00:00
bsd f983234f46 Get rid of the verbose printing of individual file CVS version ids.
This was intended to be used for identifying code in the field for
incoming bug reports, but I've never really found it all that useful.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@171 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 05:45:06 +00:00
bsd c1bcfe53a7 Change the name from AVRPROG to AVRDUDE.
This change represents a name change only.  There is currently an
effort to port AVRPROG to other platforms including Linux and Windows.
Since Atmel's programmer binary that's included within their AVR
Studio software is named AVRPROG.EXE on the Windows OS, there is the
chance for confusion if we keep calling this program AVRPROG as well.
Up until now the name hasn't really been a problem since there was no
chance to confuse 'avrprog' on Unix with Atmel's AVRPROG because
Atmel's tools only run on Windows.  But with the Unix 'avrprog'
possibly being ported to Windows, I felt a name change was the best
way to avoid problems.

So - from this point forward, my FreeBSD Unix program formerly known
as AVRPROG will subsequently be known as AVRDUDE (AVR Downloader/UploaDEr).

This change also represents a time when the AVRDUDE sources move from
my own private repository to a public repository.  This will give
other developers a chance to port AVRDUDE to other platforms and
extend its functionality to support additional programming hardware,
etc.

So goodbye AVRPROG, welcome AVRDUDE!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@170 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 05:13:32 +00:00
bsd e722fbc587 The STK500 can perform paged read/write operations even on standard
"non-paged" parts.  Take advantage of that and use the faster internal
routines of the STK500 for those parts as well.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@162 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 15:05:56 +00:00
bsd b3cc1535b6 Optimize reading and writing for the STK500 programmer if the part
supports paged reads and writes.  This greatly decreases the
program/verify time from about 4.5 minutes down to about 10 seconds in
a 12K program size test case.

Print out the hardware and firmware version for the STK500 if verbose
is enabled.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@161 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 06:35:18 +00:00
bsd 580ff186eb Seperate programmer operations out into a driver-like interface so
that programmers other than the direct parallel port connection can be
supported.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@159 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-11-30 14:09:12 +00:00
bsd 1d33dc00ba Fix -Y option. Reported by Joerg Wunsch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@153 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-11-06 02:19:57 +00:00
bsd 4aa81bac9b Be backward compatible with the 2-byte rewrite cycle counter which
appeared in version 2.1.0, but was changed to a 4 byte counter in
version 2.1.1.  Reminded by Joerg Wunsch.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@150 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-11-01 14:40:23 +00:00
bsd 88dd9b39cd Use a four byte value instead of a two byte value for the programming
cycle count stored at the end of EEPROM.  It seems as though Atmel was
greatly conservative in claiming a 1000 count reliability for the
FLASH.  I current have a part that has been reprogrammed 173330 times,
and counting.

Fix a compiler warning.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@144 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-10-11 19:36:56 +00:00
bsd 11d711787c Move erase-rewrite cycle increment to within the chip erase routine so
that it is tracked no matter where the erase was initiated: command
line mode or interactive mode, without code duplicaiton.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@141 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-08-01 02:06:48 +00:00
bsd f897273013 Eliminate unused variables.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@139 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-08-01 01:01:17 +00:00
bsd aff473ff8c Implement a way of tracking how many erase-rewrite cycles a part has
undergone.  This utilizes the last two bytes of EEPROM to maintain a
counter that is incremented each time the part is erased.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@138 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-08-01 01:00:03 +00:00
bsd 728848c593 Fix a typo in a comment. Display the size of memory being written.
Display the correct memory name in an error message (previously
hardcoded).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@137 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-07-27 20:55:01 +00:00
bsd 39502ae658 Enable the extra part verbosity when verbosity >= 3.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@124 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-02-14 02:50:58 +00:00
bsd 4337d15fc4 Fix error reporting by avr_write_byte().
Fix setting of status LEDs under various write-fail conditions.

Add a flag to indicate that a memory type requires the device to
possibly be powered off and back on after a write to it.  This is due
to a hardware problem on some Atmel devices, see:

	http://www.atmel.com/atmel/acrobat/doc1280.pdf

Add greater verbosity to the part-display code when verbose>1 to
display avrprog's encoding of the defined programming instructions.
This is primarily for debugging purposes.


Part updates:

  * add the AT90S4414 part

  * add fuse and lock bit access instructions for the AT90S1200,
    AT90S4434, and AT90S8515.

  * add the pwroff_after_write flag to the fuse bits for the AT90S2333
    and AT90S4433 parts


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@123 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-02-14 02:48:07 +00:00