Commit Graph

1114 Commits

Author SHA1 Message Date
Joerg Wunsch 92b50e0e12 Submitted by Dick Streefland:
patch #6749: make reading from the USBtinyISP programmer more robust

Add code to retry failed communication attempts.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@799 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-18 20:10:32 +00:00
Joerg Wunsch 27223edf7f Submitted by Nick Hibma:
bug #22271: usb_reset in usb_libusb.c not necessary in FreeBSD 6.x
* usb_libusb.c (usbdev_close): Do not call usb_reset() on FreeBSD.
It is not necessary there.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@798 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 17:09:53 +00:00
Joerg Wunsch 5f149728b9 Submitted by Andrew O. Shadoura:
bug #25156: add direct SPI transfer mode
* bitbang.c: Implement direct SPI transfers.
* bitbang.h: (Ditto.)
* par.c: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* term.c: Add the "spi" and "pgm" commands.
* avrdude.1: Document the changes.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@797 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 15:31:27 +00:00
Joerg Wunsch c28d976be9 Submitted by Limor ("Lady Ada"):
bug #24749: add support for '328p
* avrdude.conf.in (ATmega328P): new device support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@796 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 14:17:53 +00:00
Joerg Wunsch fa987e9de4 Submitted by "Womo":
bug #25241: AT90USB162, AT90USB82 device support patch for avrdude-5.5
(also: bug #21745: AT90USBxx2 support)
* avrdude.conf.in (AT90USB162, AT90USB82): new device support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@795 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 13:45:07 +00:00
Joerg Wunsch ca527d1832 Submitted by Evangelos Arkalis:
patch #6069: Atmel AT89ISP Cable
* avrdude.conf.in (89isp): new programmer support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@794 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 12:43:05 +00:00
Joerg Wunsch d212b7432d Submitted by Bob Paddock:
patch #6748: ATTiny88 Config
* avrdude.conf.in (ATtiny88): new device support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@793 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 13:28:55 +00:00
Joerg Wunsch 5eea41bfce Submitted by Mark Litwack:
patch #6261: avrdude won't use dragon/debugwire to write a file
to eeprom
* jtagmkII.c (jtagmkII_paged_write): when in debugWire mode,
implement a paged write to EEPROM as a series of byte writes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@792 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 12:26:44 +00:00
Joerg Wunsch ae566048c3 Submitted by Janos Sallai:
patch #6542: paged_load fails on the MIB510 programming board
* stk500.c: Add a workaround for the different signon sequence on
MIB510 programmers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@791 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 10:19:46 +00:00
Joerg Wunsch ad71fba00c Add the ATmega128RFA1, and document this.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@790 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-05 16:20:29 +00:00
Joerg Wunsch 33e6f50adb Annual changelog rotation.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@789 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-05 16:17:57 +00:00
Joerg Wunsch 981c91d72f Change the prototype for usleep() to be more Cygwin-friendly.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@788 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-19 23:32:30 +00:00
Joerg Wunsch 4f316d8f99 Submitted by limor <limor@ladyada.net>
* usbtiny.c (usbtiny_cmd): Replace sizeof() by a fixed constant
4 for the result array, because otherwise it would take the size
of a pointer which miserably fails on 64-bit machines.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@787 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-06 09:47:37 +00:00
Joerg Wunsch f66015f6e1 patch #6609: Using PCI parallel port cards on Windows
* ppiwin.c (ppi_open): If the port parameter passed from the
-p option is neither lpt1/2/3, try interpreting it directly as
a base address.
* avrdude.1: Document the change.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@786 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-05 20:53:51 +00:00
Joerg Wunsch 5813809496 bug #22882: Erase Cycle Counter does not work for stk500v2
* stk500v2.c (stk500v2_chip_erase,stk500hv_chip_erase): Return
the expected 0 for success rather than a protocol-dependant
number.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@785 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-04 13:15:21 +00:00
Joerg Wunsch f561766001 bug #22883: Chip Erase performed even with no-write flag (-n)
Do not erase the chip if both, -e and -n options have
been specified.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@784 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-04 12:10:28 +00:00
Joerg Wunsch 97dbcab70c Remove garbage from end of signature lines in AT90USB646/647, left
over accidentally from rev 1.131.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@783 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-04 11:46:32 +00:00
Joerg Wunsch 7d3a6511e3 bug #24589: AT90USB64* have wrong signature
Uncomment the correct, and delete the wrong signature for
AT90USB646/647.  Alas, the datasheet has never been corrected for
years.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@782 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-04 11:02:32 +00:00
Joerg Wunsch 21d6738cc8 Fix a serious memory corruption that happened when using the JTAG ICE
mkII (or AVR Dragon) in ISP mode.  The wrong set of per-programmer
private data had been allocated (stk500v2 vs. jtagmkII) which was too
small to hold the actual data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@781 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:26:06 +00:00
Joerg Wunsch a91e8e01b2 This change actually dates back to July 29: add preliminary support
for Xmega programming using the JTAG ICE mkII in JTAG mode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@780 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:16:46 +00:00
Joerg Wunsch 3673174077 * main.c: Remember whether the device initialization worked, and
allow to continue with -F if it failed yet do not attempt to
perform anything on the device itself.  That way, -tF could be
specified for programmers like the STK500/STK600 even without a
device connected, just in order to allow changing parameters on
the programmer itself.
* avrdude.1: Document that possible use of the -F option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@779 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-29 21:26:55 +00:00
Joerg Wunsch 7f29eb67ea * stk500v2.c (stk600_xprog_paged_write): Fix a fatal miscalculation
of the number of bytes to be written which caused a malloc chunk
corruption.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@778 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-29 08:39:15 +00:00
Joerg Wunsch 5d0bfcaf4c First implementation of ATxmega support. By now, only the
PDI mode of the STK600 is supported.  Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 22:53:40 +00:00
Joerg Wunsch 3f87de3252 Fix yet another warning:
* ser_avrdoper.c (usbGetReport): remove useless pointer deref


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@776 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 06:04:30 +00:00
Joerg Wunsch 6a633ea9f1 Fix a bunch of warnings.
* avr910.c (avr910_paged_load): possible unitialized use of
rd_size
* jtagmkI.c (jtagmkI_initialize): pointer signedness mixup
* jtagmkII.c (jtagmkII_print_parms1): propagate const'ness
of parameter
* usbasp.c (usbasp_transmit): poiner signedness mixup


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@775 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-25 21:14:43 +00:00
Joerg Wunsch 6ca3ef6517 Contributed by Ville Voipio:
patch #6501: New autotools support for avrdude
* Makefile.am: add @WINDOWS_DIRS@ to SUBDIR
* bootstrap: allow for autconf-2.61 and automake-1.10, too
* configure.ac: fix @WINDOWS_DIRS@ recursion, replace
AC_PROG_CC by AM_PROG_CC_C_O, for esoteric reasons


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@774 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-25 21:06:55 +00:00
Joerg Wunsch 854f42a09f Contributed by Janos Sallai <janos.sallai@vanderbilt.edu>:
patch #6074: added support for crossbow's MIB510 programmer
* avrdude.conf.in: Add entry for mib510.
* stk500.c: Add special hooks to handle the MIB510 programmer.
It mostly talks STK500v1 protocol but has a special hello and
goodbye sequence, and uses a fixed block size of 256 bytes.
* doc/avrdude.texi: Document support for mib510.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@773 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-06-13 21:19:46 +00:00
Joerg Wunsch cc8b75040f Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>:
* main.c: Realign verbose messages.
* avrpart.c: (Ditto.)
* avr910.c: Print the device code selected in verbose mode.
* butterfly.c: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@772 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-06-07 21:03:41 +00:00
Joerg Wunsch 2ce7151a23 Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>:
Add check for buffermode feature, and use it if present.  Can be
turned off using -x no_blockmode.
* avr910.c: Implement buffermode test and usage.
* avrdude.1: Document -x no_blockmode.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@771 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-06-07 20:55:04 +00:00
Joerg Wunsch 876f79a141 #undef interface for Win32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@770 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-29 22:10:11 +00:00
Joerg Wunsch 8339bfa6f7 Add support for the -x devcode option, and document it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@769 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-24 21:22:04 +00:00
Joerg Wunsch ec2df64017 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
Joerg Wunsch 255f873185 stk500v2_recv(): Make length computation unsigned so
it cannot accidentally become negative.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@767 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-01-26 08:01:51 +00:00
Joerg Wunsch 2b64213cdc ChangeLog rotation for 2007->2008 transition.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@766 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-01-26 07:59:07 +00:00
Joerg Wunsch df28c35d8e Partially revert the line buffered output change,
and turn stderr into unbuffered output while producing the
progress report.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@765 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-08 22:34:36 +00:00
Joerg Wunsch 58a3d35757 main.c, pgm.c, pgm.h: Add setup and teardown hooks to the programmer
definition.  If present, call the setup hook immediately after finding
the respective programmer object, and schedule the teardown hook to be
called upon exit.  This allows the programmer implementation to
dynamically allocate private programmer data.

avr910.c, butterfly.c, jtagmkI.c, jtagmkII.c, stk500v2.c, usbasp.c,
usbtiny.c: Convert static programmer data into dynamically allocated
data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@764 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-07 20:36:12 +00:00
Joerg Wunsch 286405fd74 Remove the no_show_func_info() calls, as Brian
promised some 4 years ago.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@763 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 21:00:33 +00:00
Joerg Wunsch 4d2325a1ae Fix whitespace in previous commit.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@762 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:52 +00:00
Joerg Wunsch f5c3910d48 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
Joerg Wunsch 7beb66e99c We are post 5.5 now.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@760 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 23:08:37 +00:00
Joerg Wunsch 2d90c281af Prepare for releasing avrdude 5.5.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@758 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 23:00:12 +00:00
Joerg Wunsch 8d5b9f3ea1 Submitted by <bikenomad@gmail.com>:
patch #5007: Patch for line-buffering of stdout and stderr


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@757 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 22:46:45 +00:00
Joerg Wunsch 0b7030f0fa Submitted by <graceindustries@gmail.com>:
patch #5953: Add AT90CAN64 and AT90CAN32 to avrdude.conf


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@756 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 22:43:00 +00:00
Joerg Wunsch eca3f00f65 Submitted by Wolfgang Moser:
patch #6121: ISP support for the C2N232I device (serial port
bitbanging)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@755 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 22:37:38 +00:00
Joerg Wunsch b9691e51ba Submitted by <karl.yerkes@gmail.com>:
patch #6141: accept binary format immediate values

Detect a 0b prefix, and call strtoul() differently in that case.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@754 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 22:30:59 +00:00
Joerg Wunsch d508683427 bug #21076: -vvvv serial receive prints are empty in Win32 build
In ser_recv(): Drop the essentially unused variable "len", and use the
variable "read" in order to track how many bytes have just been read
in.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@753 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 21:51:07 +00:00
Joerg Wunsch 421fbd9c94 bug #21145: atmega329p not recognized
Add definitions for the ATmega329P/3290P.  Same as ATmega329/3290
except of the different signature.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@752 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 21:45:22 +00:00
Joerg Wunsch 2bdbf19e45 The next release will have bug fixes...
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@751 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 21:27:46 +00:00
Joerg Wunsch ac4b97e716 bug #21152: Unable to program atmega324p with avrdude 5.4 and AVRISP
using default configuration file.

Uncomment the (bogus) stk500_devcode lines for the ATmega164P,
ATmega324P, ATmega644, and ATmega644P definitions.  This only affects
users of STK500v1 firmware.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@750 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 21:24:28 +00:00
Joerg Wunsch 190a4b87e8 Submitted by <ladyada@gmail.com>:
Patch #6233: Add support for USBtinyISP programmer
* usbtiny.c: New file.
* usbtiny.h: (Ditto.)
* Makefile.am: Include usbtiny into the build.
* avrdude.conf.in: (Ditto.)
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the usbtiny support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@749 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 18:03:02 +00:00