Commit Graph

12 Commits

Author SHA1 Message Date
Jan-Hinnerk Reichert 5b537c0cdb * avr910.c, avrpart.c, avrpart.h, doc/TODO: Look up devicecode and report device.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@399 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-12 22:48:50 +00:00
Jan-Hinnerk Reichert 6913c88882 *avrpart.c,main.c: Moved list_parts() and locate_part() from main.c to avrpart.c
*avrpart.h: Added prototypes for list_parts() and locate_part()


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@389 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 16:49:00 +00:00
Jan-Hinnerk Reichert 81dc6cd8d4 *avrpart.c,avr.c: Moved elementary functions on types OPCODE, AVRMEM and AVRPART from avr.c to new file avrpart.c
*avr.h: Removed prototypes for moved functions
*avrpart.h: Added prototypes for functions in avrpart.c
*Makefile.am: Added new file avrpart.c


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@388 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 16:42:10 +00:00
Theodore A. Roth 3782460fb5 * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if
available.
* avr910.c (avr910_vfy_cmd_sent): New function.
(avr910_chip_erase): Add support for chip erase.
(avr910_enter_prog_mode): New function.
(avr910_leave_prog_mode): New function.
(avr910_initialize): Add code to select device type and enter prog mode.
(avr910_close): Leave programming mode before closing serial port.
(avr910_read_sig_bytes): New function.
(avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer.
* avrdude.conf.in: Add note about deprecating devicecode.
Change all occurences of devicecode to stk500_devcode.
Add avr910_devcode to a few parts for testing.
* avrpart.h (struct avrpart): Change devicecode field to stk500_devcode.
(struct avrpart): Add avr910_devcode field.
* config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens.
Generate an error if devicecode is found in the config file.
Handle parsing of avr910_devcode and stk500_devcode.
* lexer.l: Handle parsing of avr910_devcode and stk500_devcode.
* pgm.c: Initialize pgm->read_sig_bytes field.
* pgm.h: Add pgm->read_sig_bytes field.
* stk500.c: Use stk500_devcode instead of devicecode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@293 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 06:20:02 +00:00
Brian S. Dean 04da94efb9 Add the ability to read a per-user config file located at
$HOME/.avrduderc.  Entries from .avrduderc take precedence over those
from the system wide config file in ${PREFIX}/etc/avrdude.conf.

Track and display the config file name and line number when we print
out the available parts and programmers.  This is useful in case
someone has overridden a definition in their .avrduderc file and is
wondering why the definition in the system wide config file is not
being used.

Remove the default programmer 'stk500' from the distributed config
file.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@222 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-22 16:45:13 +00:00
Brian S. Dean 8ba95cd0c3 Add the ability to specify which pin to pulse when retrying entry into
programming mode.  Use 'retry_pulse' in the per-part specification
that can currently take values of 'reset' or 'sck', the default being
'sck' which preserves the previous behaviour.  Some newer parts
indicate that /RESET should be pulsed, while older parts say to pulse
SCK.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@212 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-21 17:24:47 +00:00
Brian S. Dean 0e9ef447a0 Add 'serial' and 'parallel' keywords to the grammar so that one can
say whether parts support these programming modes or not.  Possible
values for 'serial' are 'yes' or 'no'.  Possible values for 'parallel'
are 'yes', 'no', or 'pseudo'.  Add a bit mask of flags to the AVRPART
structure to capture these settings.  Use these within
stk500_initialize() to set the device parameters correctly.

Defaults for 'serial' and 'parallel' are 'yes' unless specified
otherwise.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@208 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-20 19:46:23 +00:00
Brian S. Dean 8aa98920ef Add a few parameters needed for parallel programming: assignment of
PAGEL and BS2 signals and the disposition of the reset pin
('dedicated' or 'io').


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@202 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-20 14:11:34 +00:00
Brian S. Dean ee8bf2d5fc Makefile: include a target to automatically generate the dependency
list.

All others


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@177 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-08 04:17:25 +00:00
Brian S. Dean 08e8c6e8ee Re-license using the GNU GPL. Thanks to Ted Roth for the patch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@172 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 19:08:33 +00:00
Brian S. Dean d36b48d92b Optimize reading and writing for the STK500 programmer if the part
supports paged reads and writes.  This greatly decreases the
program/verify time from about 4.5 minutes down to about 10 seconds in
a 12K program size test case.

Print out the hardware and firmware version for the STK500 if verbose
is enabled.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@161 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 06:35:18 +00:00
Brian S. Dean dcca02ebbf Add basic support for STK500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@160 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 04:30:01 +00:00