Commit Graph

50 Commits

Author SHA1 Message Date
rliebscher 22158cd03a Create new pin definition data structures to support 0-based pin numbers, and mixed inverse/non-inverse pin lists.
* avrftdi.c,buspirate.c,linuxgpio.c,par.c,serbb_*.c: added function call 
          to fill old pinno entries from new pin definitions.
	* pindefs.[hc]: added data struct and helper functions for new pin definitions
	* avrdude.conf.in: pins in entries using ftdi_syncbb are now 0-based
	* config_gram.y: allow combinations of inverted and non-inverted pins in pin lists
	* ft245r.c: reworked to work directly with the new pin definitions,
          pins are now 0-based, inverse pins are supported, buff is supported
	* pgm.[ch]: added new pin definitions field to programmer structure, 
          adapted pin display functions

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1160 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-05-03 22:35:00 +00:00
joerg_wunsch 8fdf4d4071 Replace outdated FSF postal address by a reference to
the GPL info on their website.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1107 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-20 14:03:50 +00:00
joerg_wunsch 3fbb7642d2 Xmega page erase implementation for JTAGICEmkII
* jtagmkII.c: Handle flash pages sizes > 256 bytes, implement
page_erase() method
* avrdude.conf.in: Change flash pagesize for all Xmega devices
to 512 bytes
* avr.c: Implement auto_erase, using page_erase if available
* avr.h: Remove unused parameters from avr_read(), replace
unused parameter in avr_write)() by auto_erase
* stk500v2.c: Handle flash page sizes > 256 bytes
* update.c (do_op): Handle new updateflags parameter
* main.c: Implement auto_erase as page_erase if possible
* update.h (enum updateflags): New enum
* pgm.h (struct programmer_t): Add page_erase method



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1089 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-05-04 10:02:30 +00:00
rliebscher ee3483eadf bug #30559 Ft232 bit-bang support
* ft245r.[ch]: new programmer type implementation
* configure.ac: add pthread as link library
* avrdude.conf.in: added some new programmers
* Makefile.am: added new source files to compile
* pindefs.h: change PIN_MASK, PIN_INVERSE to highest bit of unsigned int
* pgm.[ch]: added generic function to print pin assignments (taken from par.c)
* par.c: moved pin assigment print function to pgm.c

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1055 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-02-01 22:26:58 +00:00
joerg_wunsch a86aff7232 Add a connection_type attribute to each programmer, rather than
trying to hard-code the default port name in main.c.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1047 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-01-30 17:08:48 +00:00
rliebscher 38e72e4b99 patch #7688: Implement parent programmers feature
* avrdude.conf.in: updated documentation comment and some programmers 
    have now parents
  * config_gram.y: initpgm will now called at first use of programmer 
    in main. parser sets only the function pointer in the pgm structure.
    Pin and pin lists definitions can now be empty to remove the parents
    setting.
  * doc/avrdude.texi: updated documentation
  * main.c: added call to pgm->initpgm after locate_programmer
  * pgm.[hc]: added field initpgm in structure, added function pgm_dup


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1045 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-01-22 12:31:54 +00:00
rliebscher 4976fcf88e bug #34302: Feature request : device configuration with parent classes
* config_gram.y: if memory section is overwritten old entry is removed
        
(not in original patch)
* config_gram.y: if programmer or part is defined twice, a warning is
  output and the first instance is removed
        
General cleanup and free functions, so valgrind does not report any lost
blocks at program end.
* avrpart.[hc]: added avr_free_(opcode|mem|part) functions
* pgm.[hc]: added pgm_free function
* update.[hc]: added free_update functions
* config.[hc]: added cleanup_config function, use yylex_destroy to reset
  the lexer after usage. (So it can be reused.)
* main.c: add cleanup_main function which is called by atexit() (This 
  frees all lists so that at program exit only really lost memory is 
  reported by valgrind.)
* usbasp.c: added libusb_free_device_list() and libusb_exit() calls to
  avoid lost memory
* buspirate.c: moved memory allocation from initpgm to setup and added 
  free in teardown
* configure.ac: add definition of HAVE_YYLEX_DESTROY if $LEX is flex.
* Makefile.am: added . in front of SUBDIRS to build avrdude before trying
  to use it for creating the part list for the docs.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1041 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-01-17 20:56:37 +00:00
rliebscher 7eef860eb1 patch #7671: Sorting programmers and parts lists for console output
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1019 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-12-16 20:44:07 +00:00
joerg_wunsch 95a42e16d5 Mega-commit to bring in memory tagging.
Each memory image byte is now tagged as it's being read from a file.
Only bytes read from a file will be written or verified (modulo page
granularity requirements).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1007 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-09-14 21:49:42 +00:00
joerg_wunsch d39d171985 Submitted by Juergen Weigert:
bug #22720: avrdude-5.5 ignores buff settings in avrdude.conf
(Note that the actual bug the subject is about has been fixed
long ago.)
* update.c (do_op): fix a diagnostic message
* pgm.h: add exit_datahigh field
* par.c: set and act upon the exit_datahigh field
* avrdude.1: document the new -E options
* doc/avrdude.texi: (Ditto.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@985 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 12:35:08 +00:00
joerg_wunsch 43bd052abf Submitted by Doug Springer, based on work by
Wolfgang Moser, Ville Voipio, Hannes Weisbach
patch #7486: Patch to add FT2232C/D, FT2232H, FT4232H,
usbvid, usbpid, usbdev for USB support - Based on #7062
* avrftdi.c: New file.
* avrftdi.h: (Ditto.)
* configure.ac: Add check for libftdi.
* config_gram.y: Add AVRFTDI and per-programmer USB string
keywords.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add avrftdi and 2232HIO programmers.
* pgm.h: Add USB parameters.
* Makefile.am: Add avrftdi.c and avrftdi.h.
* AUTHORS: Mention the new authors.
* avrdude.1: Document the changes.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@979 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-25 16:12:30 +00:00
joerg_wunsch 6431eece98 Submitted by Darell Tan:
patch #7244: TPI bitbang implementation
* bitbang.c: Add TPI bitbang stuff.
* bitbang.h: (Ditto.)
* avr.c: (Ditto.)
* avr.h: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* serbb_posix.c: Wire bitbang_cmd_tpi into the struct pgm.
* serbb_win32.c: (Ditto.)
* par.c: (Ditto.)
* doc/avrdude.texi: Document the TPI bitbang support.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@976 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-23 21:03:36 +00:00
joerg_wunsch c891cb15c8 Backout larger part of last commit that prematurely got into the
tree (FTDI bit-bang support, not yet fully done).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@938 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-02-11 16:20:11 +00:00
joerg_wunsch 0ae1b3957e Add forgotten ChangeLog-{2007,2008,2009} to EXTRA_DIST, so they
end up in the distribution tarball.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@937 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-02-11 16:15:56 +00:00
joerg_wunsch 3815878ed1 Submitted by Andrew O. Shadoura:
bug #25156: add direct SPI transfer mode
* bitbang.c: Implement direct SPI transfers.
* bitbang.h: (Ditto.)
* par.c: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* term.c: Add the "spi" and "pgm" commands.
* avrdude.1: Document the changes.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@797 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 15:31:27 +00:00
joerg_wunsch 8b391a8150 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
joerg_wunsch 7d70684811 main.c, pgm.c, pgm.h: Add setup and teardown hooks to the programmer
definition.  If present, call the setup hook immediately after finding
the respective programmer object, and schedule the teardown hook to be
called upon exit.  This allows the programmer implementation to
dynamically allocate private programmer data.

avr910.c, butterfly.c, jtagmkI.c, jtagmkII.c, stk500v2.c, usbasp.c,
usbtiny.c: Convert static programmer data into dynamically allocated
data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@764 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-07 20:36:12 +00:00
joerg_wunsch 0c8bd41a10 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
joerg_wunsch 817a1ce552 safemode.c: Obtain progname from avrdude.h rather than trying to roll our
own (duplicate) copy of it.

other files: Constify char pointers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@725 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-30 13:41:54 +00:00
joerg_wunsch 7c7ba6733e More backend/library abstraction and generalization: turn the
list_parts() and list_programmers() functions into general list
iteration functions that call a caller-supplied callback for each
element.  Implement list_parts() and list_programmers() as private
functions in main.c based on that approach.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@724 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-29 20:41:47 +00:00
joerg_wunsch 07c1079415 Major code cleanup.
- Make all internal functions "static".
- Make sure each module's header and implementation file match.
- Remove all library-like functionality from main.c, so only
  the actual frontend remains in main.c.
- Add C++ brackets to all header files.

That effectively leaves the various module C files as something like
an "avrdude library", with main.c being the currently only frontend
program for that library.  In theory, it should be possible to write
different frontends using the same library backend functions though.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@722 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 22:43:46 +00:00
joerg_wunsch 31fa98b708 Make the code compile warning-free:
- declare a dummy "struct timezone" for some Win32 systems (MinGW)
- fix a few printf() argument types
- get rid off the prevailing "all filedescriptors are of type int"
  attitude

The last item required a large sweep across the code, in order to
replace all "int fd"s by "struct filedescriptor *fd"s, and pass
pointers (as we cannot pass a union directly).  In return, the
code is now supposed to be fully 64-bit safe, rather than relying
on a 64-bit pointer being converted to a (32-bit) int and back
to a pointer as we did previously.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@694 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 12:47:35 +00:00
joerg_wunsch 319d25efc4 Submitted by John Voltz: add AVR053 oscillator calibration.
* main.c: Add the -O option.
* pgm.c: Add the hook for the perform_osccal() method.
* pgm.h: (Ditto.)
* stk500v2.c: Implement perform_osccal().
* avrdude.1: Document the -O option.
* doc/avrdude.texi: (Ditto.)
Partially closes bug #17487: AVR RC oscillator calibration
routine not supported (feature request)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@671 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-09 14:34:24 +00:00
joerg_wunsch cbb96b1401 Make the private prototype for gettimeofday() only visible if the
autoconfiguration figured out we need it.  The private implementation
has already been protected that way.

This should finally really fix bug #17884: another gettimeofday
conflict under win32/cygwin


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@669 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-30 20:48:17 +00:00
joerg_wunsch 46d9258164 The return type of gettimeofday() is actually `int' not `void'.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@668 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-30 19:36:22 +00:00
joerg_wunsch 9f0947a175 Fix prototype for gettimeofday().
Closes bug #17884: another gettimeofday conflict under win32/cygwin


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@667 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-29 20:52:32 +00:00
joerg_wunsch fb795d21f9 Rework the exit specs so they actually work again. It should be
possible to extend them for other programmers than PPI now (serbb,
stk500*).

* pgm.h: Keep the exit specs in an abstract form inside struct
programmer_t.  (Should be moved out into some programmer-specific
structure.)  Rename the getexitspecs() method into
parseexitspecs().
* main.c: Move the exit specs stuff out to the programmer
implementation.
* par.c: Implement the new exit spec handling.  Everything is now
done using the generic abstraction layer.

Closes bug #16443: No disable Resetsignal at the end of
Programming Session

Obviates need for patch #5057: quick and dirty Hack to unset Reset
after Programming


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@629 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-29 23:12:15 +00:00
joerg_wunsch 501918258b Submitted by Neil Davey:
patch #4539: Ability to control the bit clock (usleep) delay
for ppi interface
* bitbang.c: Implement bitbang_delay() and its calibration.
* bitbang.h: Declare bitbang_delay().
* main.c: Add the ispdelay option (-i).
* pgm.h (struct programmer_t): Add the ispdelay parameter.
* par.c: Add calls to bitbang_delay() when requested.
* serbb_posix.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* avrdude.1: Document the new -i option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@610 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-17 15:06:20 +00:00
joerg_wunsch cbaf6103aa Add ecpp(7D) (parallel port) for Solaris.
* configure.ac: add Solaris' default parallel port.
* linux_ppdev.h: change parallel port access to the new style.
* freebsd_ppi.h: New file, abstract FreeBSD's ppi(4).
* solaris_ecpp.h: New file, abstract Solaris' ecpp(7D).
* par.c: change header inclusion sequence.
* pgm.h: remove obsolete ppi_claim() and ppi_release() dummies.
* ppi.c: change header inclusion sequence, use new parport
abstraction, drop obsolete dummy implementation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@542 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-03 22:37:37 +00:00
joerg_wunsch 5564934a4e Make avrdude Solaris-compatible.
* Makefile.am: distclean avrdude.conf.
* avrdude.conf.in: make the parallel-port programmers optional.
* bitbang.c: move the bitbang features out into PROGRAMMER.
* configure.ac: introduce --enable-parport, add Solaris.
* lexer.l: replace str by strng to work around problems in some
versions of flex.
* main.c: move getexitspecs into the respective programmer's
domain; replace rindex by the C-standard strrchr.
* par.c: make parallel port optional.
* par.h: everything but par_initpgm() is private now.
* pgm.h: add setping/getping/highpulsepin/getexitspecs.
* serbb_posix.c: generalize bitbang interface; replace
cfmakeraw() by explicit code.
* serbb_win32.c: generalize bitbang interface.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@539 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-01 23:02:06 +00:00
joerg_wunsch d5464326e3 In lieu of Michael Holzt, add his serbb serial bit-bang code so it
will be available in the upcoming avrdude release.

His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-18 20:12:23 +00:00
joerg_wunsch b49dc8f645 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
bdean e4f8608da4 Update code copyrights.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@438 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:52:45 +00:00
hinni bcb78e8e05 stk500.c, term.c, doc/avrdude.texi, avrdude.1: added "sck"-command to the terminal mode. This command allows slowing down of the SCK of STK500-programmers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@427 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-07 08:59:07 +00:00
hinni 10272c5a55 Removed unnecessary includes of config.h
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@426 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-05 15:04:19 +00:00
kiwi64ajs 7f67edcce0 merged in changes to allow native Win32 build with no cygwin DLL dependancy
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@419 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-24 11:05:07 +00:00
hinni 3ee1be5529 * pgm.[ch], main.c, par.c, avr910.c, butterfly.c, stk500.c:
Move save/restore-functionality into open/close.
	* par.c: open/close now saves/restores PPICTRL, too.
	* TODO: exitspecs don't work if RESET is in PPICTRL.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@407 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-28 20:01:44 +00:00
hinni 1fe6d367ce * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates
* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@398 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:36:44 +00:00
joerg_wunsch c79d3c75b0 Add support for displaying and changing the various STK500 operational
parameters.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@336 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-07-24 21:26:28 +00:00
troth 5e3a9fc279 * avr.c (avr_write): Add call to pgm->write_setup() before the write loop.
* avr910.c: Change all show_func_info() calls to no_show_func_info().
Add read/write to/from flash/eeprom memory functionality.
* pgm.c: Initialize pgm->write_setup.
* pgm.h: Add write_setup field to PROGRAMMER structure.
* ser_posix.c: Remove unneeded cast in verbosity code.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@299 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-24 07:09:16 +00:00
troth 3a85c3c92a * avr.c: Add avr_read_byte_default().
Have avr_read_byte() call pgm->read_byte() or avr_read_byte_default().
Add avr_write_byte_default().
Have avr_write_byte() call pgm->write_byte or avr_write_byte_default().
* pgm.c: Initialize pgm->write_byte and pgm->read_byte.
* pgm.h: Add write_byte and read_byte fields to struct programmer_t.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@296 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-23 23:22:50 +00:00
troth 58f2a417cb * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if
available.
* avr910.c (avr910_vfy_cmd_sent): New function.
(avr910_chip_erase): Add support for chip erase.
(avr910_enter_prog_mode): New function.
(avr910_leave_prog_mode): New function.
(avr910_initialize): Add code to select device type and enter prog mode.
(avr910_close): Leave programming mode before closing serial port.
(avr910_read_sig_bytes): New function.
(avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer.
* avrdude.conf.in: Add note about deprecating devicecode.
Change all occurences of devicecode to stk500_devcode.
Add avr910_devcode to a few parts for testing.
* avrpart.h (struct avrpart): Change devicecode field to stk500_devcode.
(struct avrpart): Add avr910_devcode field.
* config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens.
Generate an error if devicecode is found in the config file.
Handle parsing of avr910_devcode and stk500_devcode.
* lexer.l: Handle parsing of avr910_devcode and stk500_devcode.
* pgm.c: Initialize pgm->read_sig_bytes field.
* pgm.h: Add pgm->read_sig_bytes field.
* stk500.c: Use stk500_devcode instead of devicecode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@293 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 06:20:02 +00:00
bdean 66d2a710db Add the ability to read a per-user config file located at
$HOME/.avrduderc.  Entries from .avrduderc take precedence over those
from the system wide config file in ${PREFIX}/etc/avrdude.conf.

Track and display the config file name and line number when we print
out the available parts and programmers.  This is useful in case
someone has overridden a definition in their .avrduderc file and is
wondering why the definition in the system wide config file is not
being used.

Remove the default programmer 'stk500' from the distributed config
file.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@222 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-22 16:45:13 +00:00
bsd 2c651eb7bf Makefile: include a target to automatically generate the dependency
list.

All others


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@177 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-08 04:17:25 +00:00
bsd b7c08f5901 Re-license using the GNU GPL. Thanks to Ted Roth for the patch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@172 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 19:08:33 +00:00
bsd f983234f46 Get rid of the verbose printing of individual file CVS version ids.
This was intended to be used for identifying code in the field for
incoming bug reports, but I've never really found it all that useful.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@171 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 05:45:06 +00:00
bsd e722fbc587 The STK500 can perform paged read/write operations even on standard
"non-paged" parts.  Take advantage of that and use the faster internal
routines of the STK500 for those parts as well.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@162 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 15:05:56 +00:00
bsd b3cc1535b6 Optimize reading and writing for the STK500 programmer if the part
supports paged reads and writes.  This greatly decreases the
program/verify time from about 4.5 minutes down to about 10 seconds in
a 12K program size test case.

Print out the hardware and firmware version for the STK500 if verbose
is enabled.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@161 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 06:35:18 +00:00
bsd da6e6490a4 Add basic support for STK500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@160 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 04:30:01 +00:00
bsd 580ff186eb Seperate programmer operations out into a driver-like interface so
that programmers other than the direct parallel port connection can be
supported.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@159 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-11-30 14:09:12 +00:00