* stk500.c (stk500_initialize): Insert dummy values for PAGEL and
BS2 if they are not present in the config file, in order to be able
to proceed with the stk500_set_extended_parms() anyway.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1082 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c: For the "flash" pseudo-memory of Xmega devices,
distinguish addresses between "application" and "boot" area.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1081 81a1dc3b-b13d-400b-aceb-764788c761c2
program header segment, subtract `low' from ph[n].p_paddr in order
to correct the magic section offsets for the AVR's non-flash
memory regions.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1080 81a1dc3b-b13d-400b-aceb-764788c761c2
any given section maps straight to a program header segment, use a
more sophisticated decision that matches any section as long as it
fits into the segment. This is needed for situations where the
program header segment spans a larger area than the section data
provided. (This can e.g. happen in an ELF file that contains no
data at address 0, like a bootloader only.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1079 81a1dc3b-b13d-400b-aceb-764788c761c2
firmware >= V7.x)
* jtagmkII.c: Add firmware-version dependent handling of Xmega parameters.
V7.x firmware expects the NVM offsets being specified through the Xmega
parameters command, but left out as part of the memory address itself.
* jtagmkII_private.h: Add CMND_SET_XMEGA_PARAMS, and struct xmega_device_desc.
* config_gram.y: Add mcu_base keyword.
* avrpart.h: (Dito.)
* lexer.l: (Dito.)
* avrdude.conf.in (.xmega): add mcu_base, and data memory segment.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1078 81a1dc3b-b13d-400b-aceb-764788c761c2
firmware < V7.x)
* jtagmkII.c: When going to write to the boot section of flash,
use MTYPE_BOOT_FLASH rather than MTYPE_FLASH
* jtagmkII_private.h: add MTYPE_BOOT_FLASH constant
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1077 81a1dc3b-b13d-400b-aceb-764788c761c2
supported error
* stk500v2.c: Handle all Xmega memory sections (except
"prodsig" which is not documented in AVR079)
* fileio.c: Treat the "boot", "application", and "apptable"
regions (which are actually subregions of "flash") all as
being flash, i.e. suppress trailing 0xFF bytes when reading
them
* avr.c: (Dito.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1075 81a1dc3b-b13d-400b-aceb-764788c761c2
"GO" code in again, but only activate it when programming an
Xmega device through PDI.
Wonderfully consistent tools.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1071 81a1dc3b-b13d-400b-aceb-764788c761c2
turned out to do more harm than good; on the Xmega, it caused exactly
the opposite reaction, the CPU stopped. Even without it, after the
RESET command, the target is running already. So, drop the GO.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1070 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrftdi.[ch]: moved global data into private data structure, moved
private defines from header file into source file
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1068 81a1dc3b-b13d-400b-aceb-764788c761c2
(generating the programmers lists)
* doc/avrdude.texi: Add include of generated table of programmers
* doc/Makefile.am: Add generating of table of programmers in programmers.texi
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1062 81a1dc3b-b13d-400b-aceb-764788c761c2
* ft245r.[ch]: new programmer type implementation
* configure.ac: add pthread as link library
* avrdude.conf.in: added some new programmers
* Makefile.am: added new source files to compile
* pindefs.h: change PIN_MASK, PIN_INVERSE to highest bit of unsigned int
* pgm.[ch]: added generic function to print pin assignments (taken from par.c)
* par.c: moved pin assigment print function to pgm.c
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1055 81a1dc3b-b13d-400b-aceb-764788c761c2
* config.[hc]: removed unused function id(), use value.type to select
values
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1053 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #7686 Updating buspirate ascii mode to current firmware, use AUX
as clock generator, and setting of serial receive timeout
* buspirate.c: added paged_write, changed binary mode setup/detection,
added clock output on AUX pin
* avrdude.1: updated documentation
* doc/avrdude.texi: updated documentation
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1052 81a1dc3b-b13d-400b-aceb-764788c761c2
will update only the table in pgm_type.c.
* config_gram.y, lexer.l: removed programmer type keywords,
use now locate_programmer_type() function
* pgm_type.[ch]: added new files for table of programmer types
* main.c: allow list of programmer types by -c ?type
* avrdude.conf.in: changed all type keywords to quoted strings
* doc/avrdude.texi: changed description of type definition, list
of valid types is now included from generated file
* doc/Makefile.am: generate list of programmer types for doc
* all programmers [hc]: add xxx_desc string for description of programmer
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1051 81a1dc3b-b13d-400b-aceb-764788c761c2
nounput. This gets rid of a compiler warning, so we are warning-free
again.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1048 81a1dc3b-b13d-400b-aceb-764788c761c2
trying to hard-code the default port name in main.c.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1047 81a1dc3b-b13d-400b-aceb-764788c761c2
abstract .xmega part as parent for xmegas
* main.c: hide parts starting with '.' from parts list
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1046 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in: updated documentation comment and some programmers
have now parents
* config_gram.y: initpgm will now called at first use of programmer
in main. parser sets only the function pointer in the pgm structure.
Pin and pin lists definitions can now be empty to remove the parents
setting.
* doc/avrdude.texi: updated documentation
* main.c: added call to pgm->initpgm after locate_programmer
* pgm.[hc]: added field initpgm in structure, added function pgm_dup
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1045 81a1dc3b-b13d-400b-aceb-764788c761c2
to lusb0_usb.h (for whatever reason). Autoprobe for the filename
during configure, and include whatever is appropriate.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1043 81a1dc3b-b13d-400b-aceb-764788c761c2
functions. So a negative return code led never to a fallback to byte
functions.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1042 81a1dc3b-b13d-400b-aceb-764788c761c2
* config_gram.y: if memory section is overwritten old entry is removed
(not in original patch)
* config_gram.y: if programmer or part is defined twice, a warning is
output and the first instance is removed
General cleanup and free functions, so valgrind does not report any lost
blocks at program end.
* avrpart.[hc]: added avr_free_(opcode|mem|part) functions
* pgm.[hc]: added pgm_free function
* update.[hc]: added free_update functions
* config.[hc]: added cleanup_config function, use yylex_destroy to reset
the lexer after usage. (So it can be reused.)
* main.c: add cleanup_main function which is called by atexit() (This
frees all lists so that at program exit only really lost memory is
reported by valgrind.)
* usbasp.c: added libusb_free_device_list() and libusb_exit() calls to
avoid lost memory
* buspirate.c: moved memory allocation from initpgm to setup and added
free in teardown
* configure.ac: add definition of HAVE_YYLEX_DESTROY if $LEX is flex.
* Makefile.am: added . in front of SUBDIRS to build avrdude before trying
to use it for creating the part list for the docs.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1041 81a1dc3b-b13d-400b-aceb-764788c761c2
id "usbasp" nibobee and old usbasp are tried as they were currently
implemented within usbasp
* avrdude.conf.in: added usb params to "usbasp", added new entry "nibobee"
with params which were hardcoded in usbasp.c, and added an entry
"usbasb-clone" which only checks vid/pid.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1040 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrftdi.c: Fixed interface and implementation of avrftdi_paged_(write|load)
patch #7672 adding support for O-Link (FTDI based JTAG) as programmer
* avrdude.conf.in: added o-link entry
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1039 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset
Arduino Uno properly
* arduino.c (arduino_open): Bump the timeout between pulling
the DTR and RTS lines low and high.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1036 81a1dc3b-b13d-400b-aceb-764788c761c2
* avr910.c:625 (error) Possible null pointer dereference: cmd - otherwise it is redundant to check if cmd is null at line 624
* avr910.c:626 (error) Possible null pointer dereference: cmd - otherwise it is redundant to check if cmd is null at line 624
* avr910.c:168 (information) The scope of the variable 'devtype_1st' can be reduced
* avr910.c:169 (information) The scope of the variable 'dev_supported' can be reduced
* avrftdi.c:647 (error) Using sizeof for array given as function argument returns the size of pointer.
* stk500v2.c:3347 (error) Memory leak: b
* stk500v2.c:3452 (error) Memory leak: b
* usbasp.c:554 (error) Using sizeof for array given as function argument returns the size of pointer.
* usbasp.c:485 (information) The scope of the variable 'dly' can be reduced
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1035 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in: Added m48p with parent m48 + different signature
* avrdude.conf.in: made part parents (m88p = m88 + different signature, m168p = m168 + different signature)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1033 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #30438 efuse bits written as 0 on at90pwmxx parts
* avrdude.conf.in: (pwm2, pwm2b, pwm3, pwm3b) <efuse.write>: Write
eight bits
* avrdude.conf.in: made part parents (pwm3 = pwm2, pwm3b = pwm2b,
pwm2b = pwm2 + different signature)
* ChangeLog-2011: New file, rotate ChangeLog for new year.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1032 81a1dc3b-b13d-400b-aceb-764788c761c2
* doc/avrdude.texi: Added missing options to part definition
* config_gram.y: Fixed resetting of is_at90s1200 and is_avr32 flags
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1031 81a1dc3b-b13d-400b-aceb-764788c761c2
non-standard baud rates (only baud rates up to B38400 are
standardized by the Single UNIX Specification).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1029 81a1dc3b-b13d-400b-aceb-764788c761c2
(not in original patch)
* avrpart.c: New function avr_dup_opcode. avr_dup_mem/avr_dup_part-
functions now duplicate the opcodes in their op-array to avoid memory leaks.
* doc/avrdude.texi: Added description of part parent f
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1028 81a1dc3b-b13d-400b-aceb-764788c761c2
* doc/Makefile.am: Add rule how to create avrdude before generating parts list
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1027 81a1dc3b-b13d-400b-aceb-764788c761c2
(Extended Linear Address Record)
Replace the change from r928 (handling of 0x8000000 offset in AVR32
files) by a completely different logic that no longer breaks hex files
for other devices starting with an offset; also apply a similar change
to S-record files, as well as when writing files.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1017 81a1dc3b-b13d-400b-aceb-764788c761c2
it has been explicitly requested (by -y or -Y), rather than always
attempting to read the last EEPROM bytes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1014 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix regression in the AVRISPmkII/STK600 TPI handling introduced
by the USBasp's TPI implementation which added a pagesize even for
the minor memory regions of TPI devices. Also fix wrong offset
introduced by the memory tagging patch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1009 81a1dc3b-b13d-400b-aceb-764788c761c2
their programmer doesn't provide a (low-level) cmd_tpi method;
instead, fall back to the normal programmer methods which are
supposed to handle the situation.
This fixes a regression where the recent bitbang-TPI implementation
broke TPI handling of STK600/AVRISPmkII.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1008 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c (stk500v2_initialize): For the AT90S1200, release
/RESET for a moment before reinitializing, as this is required by
its programming protocol.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1004 81a1dc3b-b13d-400b-aceb-764788c761c2
than ftdi_init(), as this is a more specific thing to search for in
order to make sure getting a recent enough libftdi.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1003 81a1dc3b-b13d-400b-aceb-764788c761c2
programmers)
* config_gram.y: Introduce new keyword "is_at90s1200".
* lexer.l: (Ditto.)
* avrdude.conf.in: Applew new keyword to the AT90S1200 device.
* avrpart.h: Introduce new flag AVRPART_IS_AT90S1200, reflecting
the is_at90s1200 configuration keyword.
* bitbang.c (bitbang_initialize): Replace existing test for
AT90S1200 by AVRPART_IS_AT90S1200
* avr.c (avr_write_byte_default): Avoid the pre-write reading for
the AT90S1200, as this appears to sometimes corrupt the high byte
by pre-programming the low byte just written into it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1002 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #7056: adding support for mikrokopter bootloader to butterfly
* butterfly.c: Add some specific logic to handle the
mikrokopter.de butterfly bootloader.
* butterfly.h: Add one related function declaration.
* config_gram.y: Add butterfly_mk keyword.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add entry for butterfly_mk.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@991 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf (jtagkey): Add a definition for the Amontec
JTAGKey
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@986 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #22720: avrdude-5.5 ignores buff settings in avrdude.conf
(Note that the actual bug the subject is about has been fixed
long ago.)
* update.c (do_op): fix a diagnostic message
* pgm.h: add exit_datahigh field
* par.c: set and act upon the exit_datahigh field
* avrdude.1: document the new -E options
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@985 81a1dc3b-b13d-400b-aceb-764788c761c2
* jtagII.c (jtagmkII_getsync): Instead of exit()ing from
deep within the tree when detecting the "need debugWIRE"
situation, properly pass this up as a return code.
* jtagII_private.h (JTAGII_GETSYNC_FAIL_GRACEFUL): New constant.
* stk500v2.c (stk500v2_jtagmkII_open): Don't tell anything
anymore when receiving a JTAGII_GETSYNC_FAIL_GRACEFUL from
jtagmkII_getsync(); silently give up (all necessary has been
said already).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@983 81a1dc3b-b13d-400b-aceb-764788c761c2
* usbasp.c (libusb_to_errno): Conditionalize some error codes
that apparently are lacking on MinGW.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@982 81a1dc3b-b13d-400b-aceb-764788c761c2
* ser_avrdoper.c: add <stdlib.h> so exit() is declared.
* usbtiny.c (usbtiny_open): provide an initializer to a
"may be used uninitialized" variable (since GCC could not
fully detect the logic behind).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@981 81a1dc3b-b13d-400b-aceb-764788c761c2
Wolfgang Moser, Ville Voipio, Hannes Weisbach
patch #7486: Patch to add FT2232C/D, FT2232H, FT4232H,
usbvid, usbpid, usbdev for USB support - Based on #7062
* avrftdi.c: New file.
* avrftdi.h: (Ditto.)
* configure.ac: Add check for libftdi.
* config_gram.y: Add AVRFTDI and per-programmer USB string
keywords.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add avrftdi and 2232HIO programmers.
* pgm.h: Add USB parameters.
* Makefile.am: Add avrftdi.c and avrftdi.h.
* AUTHORS: Mention the new authors.
* avrdude.1: Document the changes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@979 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #31779: Add support for addressing usbtinyisp with -P option
* usbtiny.c (usbtiny_open): Add logic to distinguish multiple USBtinyISP
programmers by their bus:device tuple.
* doc/avrdude.texi: Document the new functionality.
* avrdude.1: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@974 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #30268: Debugwire broken in avrdude-5.10
* jtagmkII.c (jtagmkII_initialize): only try setting up a JTAG chain when
the programmer is using JTAG.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@973 81a1dc3b-b13d-400b-aceb-764788c761c2
on the AVRISP-MKII
* stk500v2.c (stk500v2_program_enable): Rewrite the logic to
explain ISP activation failures.
* stk500v2_private.h: Fix the various STATUS_* constants;
AVR069 and AVR079 disagreed in their values, even though they
are apparently implementing the same logic behind.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@972 81a1dc3b-b13d-400b-aceb-764788c761c2
ATtiny88, ATmega168, ATmega168P, ATmega328P): Bump delay value for STK500v2
EEPROM write operation to 5, according to the respective XML files.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@970 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #31386: A "BUILD.svn" or similar "how to get started" doc would be helpful
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@967 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #32539: [Documentation][Patch] Man page is misleading re: Dragon & PDI
Update information about PDI connections on AVR Dragon
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@966 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #33345: File auto detection as binary doesn't open
file in binary mode on Windows
* fileio.c: Move the decision about opening files in
binary mode until before the fopen() call.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@964 81a1dc3b-b13d-400b-aceb-764788c761c2
timeout should depend on the selected clock speed, but changing the
API for that would require quite some effort throughout the entire
code base.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@954 81a1dc3b-b13d-400b-aceb-764788c761c2
Thanks to Vitaly Chernookiy for the patch.
* avrdude.conf.in: Add support for atmega324pa.
* ChangeLog-2010: New file, rotate ChangeLog for new year.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@953 81a1dc3b-b13d-400b-aceb-764788c761c2
programming stability, in particular with the STK600.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@952 81a1dc3b-b13d-400b-aceb-764788c761c2
joerg_wunsch
rliebscher
fischl
arcanum