* Provide cached byte-wise read/write API
int avr_read_byte_cached(const PROGRAMMER *pgm, const AVRPART *p, const
AVRMEM *mem, unsigned long addr, unsigned char *value);
int avr_write_byte_cached(const PROGRAMMER *pgm, const AVRPART *p, const
AVRMEM *mem, unsigned long addr, unsigned char data);
int avr_flush_cache(const PROGRAMMER *pgm, const AVRPART *p);
int avr_chip_erase_cached(const PROGRAMMER *pgm, const AVRPART *p);
int avr_reset_cache(const PROGRAMMER *pgm, const AVRPART *p);
avr_read_byte_cached() and avr_write_byte_cached() use a cache if paged
routines are available and if the device memory is EEPROM or flash,
otherwise they fall back to pgm->read_byte() and pgm->write_byte(),
respectively. Byte-wise cached read always gets its data from the cache,
possibly after reading a page from the device memory. Byte-wise cached
write with an address in memory range only ever modifies the cache. Any
modifications are written to the device after calling avr_flush_cache() or
when attempting to read or write from a location outside the address range
of the device memory.
avr_flush_cache() synchronises pending writes to EEPROM and flash with the
device. With some programmer and part combinations, flash (and sometimes
EEPROM, too) looks like a NOR memory, ie, one can only write 0 bits, not 1
bits. When this is detected, either page erase is deployed (eg, with parts
that have PDI/UPDI interfaces), or if that is not available, both EEPROM
and flash caches are fully read in, a pgm->chip_erase() command is issued
and both EEPROM and flash are written back to the device. Hence, it can
take minutes to ensure that a single previously cleared bit is set and,
therefore, this routine should be called sparingly.
avr_chip_erase_cached() erases the chip and discards pending writes() to
flash or EEPROM. It presets the flash cache to all 0xff alleviating the
need to read from the device flash. However, if the programmer serves
bootloaders (pgm->prog_modes & PM_SPM) then the flash cache is reset
instead, necessitating flash memory be fetched from the device on first
read; the reason for this is that bootloaders emulate chip erase and they
won't overwrite themselves (some bootloaders, eg, optiboot ignore chip
erase commands altogether) making it truly unknowable what the flash
contents on device is after a chip erase.
For EEPROM avr_chip_erase_cached() concludes that it has been deleted if a
previously cached EEPROM page that contained cleared bits now no longer
has these clear bits on the device. Only with this evidence is the EEPROM
cache preset to all 0xff otherwise the cache discards all pending writes
to EEPROM and is left unchanged otherwise.
Finally, avr_reset_cache() resets the cache without synchronising pending
writes() to the device.
- Replace strdup(s) with cfg_strdup(funname, s) that exits on out of mem
- Replace malloc(n) with cfg_malloc(funname, n) that exits on out of mem
- Change multiline string scanning in lexer.l to avoid core dump
- Remove global variables string_buf and string_bug_ptr
- Ensure reading strings unescapes strings C-Style
- Ensure writing strings escapes strings C-Style again
Commit looks longer than needed as unescape() and auxiliary functions needed
to be moved from term.c (not in libavrdude) to config.c (in libavrdude).
Some C libraries assign true to isalpha(0xff), isdigit(0xff) or
ispunct(0xff), which means that the Operating System terminal sees a
character 0xff which it may not have a useful display character for.
This commit only outputs printable ASCII characters for an AVRDUDE
terminal dump reducing the risk of the OS terminal not being able
to print the character properly.
Error messages are written to stderr whilst normal terminal output is stdout.
When redirecting output to pipelines or files these two streams can get
separated as they are buffered separately. To avoid this, term.c now provides
a function terminal_message() that works just like avrdude_message() but
flushes stderr and stdout before printing on stderr, and it flushes stderr
afterwards.
This commit replaces all avrdude_message() calls except for progress report
with terminal_message() to ensure stdout and stderr streams keep together.
This enables the new quell terminal command to switch on and off progress
reports to the terminal. The code for this was moved from main.c to term.c.
It can be used as library call for other frontends than main.c
Sets the quell_progress global variable that can be, and is, consulted by
programmers.
Setting quell_progress to a positive number also switches off progress
bars. It is currently not possible to switch on progress bars again: that
is enabled in main.c once at the start of AVRDUDE.
That code in main should move to avr.c to enable report_update() to consult
quell_progress directly. Will do at another time when touching main.c and
avr.c. smr
The code no longer accepts valid mantissa-only doubles that are integer
rejects, eg, 078 or ULL overflows. These are most likely input errors by
the user: 8 is not an octal digit, they might have typed 17 hex digits,
not 16. It's just too hard to explain that 0xffffFFFFffffFFFFf writes
0x4430000000000000, which is the correct double representation of the
valid 17-digit hex mantissa that strtod() is perfectly happy to accept.
Integers can be hexadecimal, decimal or octal. An optional case-insensitive
suffix specifies their size: HH: 8 bit, H/S: 16 bit, L: 32 bit, LL: 64 bit
An optional U suffix makes a number unsigned. Ordinary 0x hex numbers are
always treated as unsigned. +0x or -0x hex numbers are treated as signed
unless they have a U suffix. Unsigned integers cannot be larger than 2^64-1.
If n is an unsigned integer then -n is also a valid unsigned integer as in C.
Signed integers must fall into the [-2^63, 2^63-1] range or a correspondingly
smaller range when a suffix specifies a smaller type. Out of range signed
numbers trigger a warning.
Ordinary 0x hex numbers with n hex digits (counting leading zeros) use
the smallest size of 1, 2, 4 and 8 bytes that can accommodate any n-digit hex
number. If a suffix specifies a size explicitly the corresponding number of
least significant bytes are written. Otherwise, signed and unsigned integers
alike occupy the smallest of 1, 2, 4, or 8 bytes needed to accommodate them
in their respective representation.
Using strtoll() can only return numbers in the range [-2^63, 2^63-1]. This
means that 0xffffFFFFffffFFFF (2^64-1) will be out of range and is written as
max LL. Actually, every 64-bit number with high-bit set will wrongly be
written as max LL.
This commit uses strtoull() instead to fix this, and checks for unsiged out-
of-range error. strtoull() also has the neat benefit that input with a minus
sign is treated like C unsigned numbers, ie, -u is also a valid unsigned
number if only u is one. In case the input is meant to be treated as signed,
it is therefore still OK to use strtoull() in the first instance only that in
this case a second check against the range of the signed domain is necessary.
Marius Greuel
Stefan Rueger
MCUdude