Commit Graph

22 Commits

Author SHA1 Message Date
bdean 5fb877f403 This is patch #3277 which appears to fix a number of issues with the
avr910 programmer.

Original Submission: The attached patch against avrdude 4.4.0 fixes
the following problems with paged writes in avr910.c:

  - failure to re-set address after page writes;
  - no polling or delay after page writes;
  - no page writes when not using auto-increment;
  - an extraneous page write when data ends on page boundary.

Submitted by: "Nic" <avrdude@schraudolph.org>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@510 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-18 00:28:19 +00:00
bdean 20f3be439c Eliminate compiler warnings. GCC 4.x elicits many signedness warnings
when passing unsigned char * when char * is in the prototype and vice
versa.  Clean these up along with a few others.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@491 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-08-30 01:30:05 +00:00
joerg_wunsch d2825e00fd Revert the serial_recv() timeout handling as it used to be before my
yesterday's changes (i.e. before rev. 1.10 of ser_posix.c), that is,
exit(1) in case of a timeout.  Previously, the upper layers didn't see
the timeout at all.

Quite possible that some of these drivers could handle a timeout more
intelligently though.  At least for the rather sophisticated STK500v2
protocol, I think it should be possible to retry the request.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@460 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 17:09:22 +00:00
bdean e4f8608da4 Update code copyrights.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@438 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:52:45 +00:00
kiwi64ajs 7f67edcce0 merged in changes to allow native Win32 build with no cygwin DLL dependancy
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@419 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-24 11:05:07 +00:00
hinni 01752e0056 avr910.c: Hopefully fixed that weird "first byte not programmed"-error in a good way (previous fix was not working with all firmwares)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@412 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-04-17 19:37:14 +00:00
hinni 11b56cf88b * pgm.c, main.c, avr910.c, butterfly.c, stk500.c: Changed default for powerup, powerdown and LED-commands to do nothing and return OK. Then removed these commands from avr910, butterfly and stk500.
* pgm.c: Fixed wrong type for default_open introduced by the cleanup yesterday.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@409 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-29 13:23:59 +00:00
hinni 3ee1be5529 * pgm.[ch], main.c, par.c, avr910.c, butterfly.c, stk500.c:
Move save/restore-functionality into open/close.
	* par.c: open/close now saves/restores PPICTRL, too.
	* TODO: exitspecs don't work if RESET is in PPICTRL.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@407 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-28 20:01:44 +00:00
hinni 93f2a54036 * avr910.c, avrpart.c, avrpart.h, doc/TODO: Look up devicecode and report device.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@399 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-12 22:48:50 +00:00
hinni 1fe6d367ce * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates
* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@398 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:36:44 +00:00
hinni 5d3329f79d avr910.c: Removed debugging stuff that is no longer needed.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@397 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:18:57 +00:00
troth 3827320f15 * avr.c (avr_read_byte): If pgm->read_byte method fails, retry with
avr_read_byte_default.
* avr.c (avr_write_byte): If pgm->write_byte method fails, retry with
avr_write_byte_default.
* avr910.c (avr910_cmd): Implement using universal command.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@364 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-05 16:40:55 +00:00
arcanum 51a3d56245 * avr910.c:
* fileio.c:
    * main.c:
    * stk500.c:
    More code cleanup to remove warnings.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@352 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-28 23:02:25 +00:00
troth 5bf7290268 * avr.c:
* avr.h:
* avr910.c:
* main.c:
* stk500.c:
New progress reporting implementation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@337 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-07-29 22:08:21 +00:00
troth d62232cf63 * avr910.c (avr910_paged_write_flash): Add code to send the 'm'
command ("issue page write" cmd) for each page.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@329 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-14 05:14:32 +00:00
troth 299e6aa6ad * avr910.c: Reading a 16 bit word in paged load needs to swap the
bytes since the 'R' command returns MSB first and the internal buffer
stores LSB first.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@307 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-09 20:37:28 +00:00
troth c6bc161763 * avr910.c: Re-add the avr910 byte read/write methods which were
removed in my previous patch. Terminal mode read/writes are broken
without those methods. D'oh!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@305 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-06 07:10:44 +00:00
troth 2a30421f7e * avr910.c: Refactor to allow probing for auto addr increment. If auto
incr supported by programmer hw, don't send addr for every byte.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@304 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-06 00:47:16 +00:00
troth 5e3a9fc279 * avr.c (avr_write): Add call to pgm->write_setup() before the write loop.
* avr910.c: Change all show_func_info() calls to no_show_func_info().
Add read/write to/from flash/eeprom memory functionality.
* pgm.c: Initialize pgm->write_setup.
* pgm.h: Add write_setup field to PROGRAMMER structure.
* ser_posix.c: Remove unneeded cast in verbosity code.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@299 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-24 07:09:16 +00:00
troth 58f2a417cb * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if
available.
* avr910.c (avr910_vfy_cmd_sent): New function.
(avr910_chip_erase): Add support for chip erase.
(avr910_enter_prog_mode): New function.
(avr910_leave_prog_mode): New function.
(avr910_initialize): Add code to select device type and enter prog mode.
(avr910_close): Leave programming mode before closing serial port.
(avr910_read_sig_bytes): New function.
(avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer.
* avrdude.conf.in: Add note about deprecating devicecode.
Change all occurences of devicecode to stk500_devcode.
Add avr910_devcode to a few parts for testing.
* avrpart.h (struct avrpart): Change devicecode field to stk500_devcode.
(struct avrpart): Add avr910_devcode field.
* config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens.
Generate an error if devicecode is found in the config file.
Handle parsing of avr910_devcode and stk500_devcode.
* lexer.l: Handle parsing of avr910_devcode and stk500_devcode.
* pgm.c: Initialize pgm->read_sig_bytes field.
* pgm.h: Add pgm->read_sig_bytes field.
* stk500.c: Use stk500_devcode instead of devicecode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@293 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 06:20:02 +00:00
troth ae3f4e852f * avrdude.conf.in: Add avr910 and pavr programmers.
* config_gram.y: Add parsing of avr910 programmer.
* lexer.l: Add avr910 token.
* avr910.c: [this is still work in progress]
Add some debug output.
Add probe for programmer presense.
* main.c: Set port to default_serial if programmer type is avr910.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@292 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-16 18:19:37 +00:00
troth 746f6f4421 * Makefile.am (avrdude_SOURCES): Add avr910.[ch], serial.h and
ser_posix.c files.
* avr910.c: New file (stubs for avr910 serial programmer).
* avr910.h: New file.
* ser_posix.c: New file.
* ser_win32.c: New file (just stubs for now).
* serial.h: New file.
* stk500.c: Move all the code for accessing the posix serial ports
into ser_posix. This will make a native win32 port easier and allows
the avr910 programmer to share the serial code.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@289 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-13 03:52:19 +00:00