Commit Graph

18 Commits

Author SHA1 Message Date
joerg_wunsch 8fdf4d4071 Replace outdated FSF postal address by a reference to
the GPL info on their website.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1107 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-20 14:03:50 +00:00
joerg_wunsch b62408923b bug #28744: Can't load bootloader to xmega128a1 (part 2, fix for
firmware >= V7.x)
* jtagmkII.c: Add firmware-version dependent handling of Xmega parameters.
V7.x firmware expects the NVM offsets being specified through the Xmega
parameters command, but left out as part of the memory address itself.
* jtagmkII_private.h: Add CMND_SET_XMEGA_PARAMS, and struct xmega_device_desc.
* config_gram.y: Add mcu_base keyword.
* avrpart.h: (Dito.)
* lexer.l: (Dito.)
* avrdude.conf.in (.xmega): add mcu_base, and data memory segment.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1078 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-04-13 15:25:41 +00:00
joerg_wunsch ab52c9e972 bug #28744: Can't load bootloader to xmega128a1 (part 1, fix for
firmware < V7.x)
* jtagmkII.c: When going to write to the boot section of flash,
use MTYPE_BOOT_FLASH rather than MTYPE_FLASH
* jtagmkII_private.h: add MTYPE_BOOT_FLASH constant



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1077 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-03-30 16:19:13 +00:00
joerg_wunsch 032704bd95 Sort commands, response codes and events into numerical order.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1076 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-03-30 14:03:38 +00:00
joerg_wunsch b177acae71 bug #33114: Segfault after setting the DWEN fuse with Dragon
* jtagII.c (jtagmkII_getsync): Instead of exit()ing from
deep within the tree when detecting the "need debugWIRE"
situation, properly pass this up as a return code.
* jtagII_private.h (JTAGII_GETSYNC_FAIL_GRACEFUL): New constant.
* stk500v2.c (stk500v2_jtagmkII_open): Don't tell anything
anymore when receiving a JTAGII_GETSYNC_FAIL_GRACEFUL from
jtagmkII_getsync(); silently give up (all necessary has been
said already).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@983 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 10:05:09 +00:00
joerg_wunsch ff687cd21c Implement PDI mode support for the JTAG ICE mkII and the AVR Dragon.
(AVR Dragon not yet verified.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@912 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 17:34:18 +00:00
joerg_wunsch 1429550f8e Cleanup the open/close handling to avoid accessing
unallocated memory (in the atexit handler) in case of bailing out.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@910 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 12:44:54 +00:00
joerg_wunsch 3e2e779436 * jtagmkII.c: Stylistic changes: move #defines out into
jtagmkII_private.h, drop all #if 0 blocks, fold overly long lines,
move the *_initpgm() functions to the end of the file; while being
here, remove all trailing whitespace.
* jtagmkII_private.h: move AVR32 #defines here.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@909 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 08:37:57 +00:00
joerg_wunsch b827263faa Clean-up the Xmega erase functions.
* jtagmkII_private.h: Add CMND_XMEGA_ERASE as well as
the various XMEGA_ERASE_* definitions (from updated
appnote AVR067)
* jtagmkII.c (jtagmkII_chip_erase): Correctly implement
Xmega chip erase based on CMND_XMEGA_ERASE.
* jtagmkII.c (jtagmkII_pre_write): Remove, this turned out
to be just a chip erase.
* jtagmkII.c (jtagmkII_program_disable): Don't try reading
"hfuse" for Xmega parts; they don't have it.
* main.c (main): Re-enable auto-erase.  It's been done
before (as "jtagmkII_pre_write") in jtagmkII_paged_write()
anyway.  Xmega boot and application flash areas should be
handled separately in the future, so auto_erase can only
affect the area just being programmed.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@903 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-11 15:27:44 +00:00
dhoerl dedc0c3d70 Added read msg for AVR32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@861 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 23:33:35 +00:00
dhoerl 6f4fe97cca AVR32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@853 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 20:09:57 +00:00
joerg_wunsch 366db1ab6e Contributed by Zoltan Laday:
patch #6825: xmega problems with JTAGICEmkII
* jtagmkII.c: Many fixes for Xmega devices.
* jtagmkII_private.h: Add various new constants required for
Xmega devices.
* avrdude.conf.in: New devices: ATXMEGA64A1, ATXMEGA192A1,
ATXMEGA256A1, ATXMEGA64A3, ATXMEGA128A3, ATXMEGA192A3,
ATXMEGA256A3, ATXMEGA256A3B, ATXMEGA16A4, ATXMEGA32A4,
ATXMEGA64A4, ATXMEGA128A4
* avr.c (avr_read, avr_write): Add more names for (Xmega)
memory areas that require paged operation.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@821 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-06-24 21:32:12 +00:00
joerg_wunsch 50ef8a71b3 This change actually dates back to July 29: add preliminary support
for Xmega programming using the JTAG ICE mkII in JTAG mode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@780 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:16:46 +00:00
joerg_wunsch c35b4481dc Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
joerg_wunsch f8796c29cc Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
joerg_wunsch 69aff1ca91 Rename the BAUD_xxx baud rate defines to PAR_BAUD_xxx to avoid a name
clash with the Win32 API names for baud rates.

Reported by: Eric


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@462 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:48:05 +00:00
joerg_wunsch 6ba0f493b4 Quite some cleanup of the JTAG ICE mkII stuff.
. Implement the new EECRAddress field in the device descriptor that is
  required by the 4.x firmware; make an uneducated guess about what
  firmware requires what length of device descriptor -- perhaps Atmel
  can be convinced to publish an official matrix for that.

. Specify EECR in the config file where required.  Obviously, only
  locations that differ from the 0x3c default are mentioned in the
  XML files, so by now, this only affects the AT90CAN128 for us.

. After clarification with Atmel, EnablePageProgramming should really
  default to 1, and only cleared if specified by an XML parameter.  So
  far, only the XML files for the ATmega256x and ATmega406 do specify
  it at all, and they specify a 1, too.

. Drop the entire OCDEN fuse heuristic.  If OCDEN is unprogrammed at
  startup, issue a warning that single-byte EEPROM updates won't be
  possible.  Leave it to the user to program the fuse if desired.
  That way, we won't run into any issue of prematurely wearing out the
  hfuse EEPROM cell.  Interestingly enough, this also solved the
  problem of the target not restarting from scratch upon sign-off.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@461 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:06:23 +00:00
joerg_wunsch 9839579e66 Oops, more files I forgot to add during the last commit.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@453 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:53:56 +00:00