possible to extend them for other programmers than PPI now (serbb,
stk500*).
* pgm.h: Keep the exit specs in an abstract form inside struct
programmer_t. (Should be moved out into some programmer-specific
structure.) Rename the getexitspecs() method into
parseexitspecs().
* main.c: Move the exit specs stuff out to the programmer
implementation.
* par.c: Implement the new exit spec handling. Everything is now
done using the generic abstraction layer.
Closes bug #16443: No disable Resetsignal at the end of
Programming Session
Obviates need for patch #5057: quick and dirty Hack to unset Reset
after Programming
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@629 81a1dc3b-b13d-400b-aceb-764788c761c2
via the patch tracking system.
patch #5096: Allow VCC and BUFF to be any pin in parallel mode
* config_gram.y: Release the restriction to PPIDATA pins.
* par.c: Rework the code to introduce a function par_setmany()
that builds on top of par_setpin(), and use that function for the
PPI_AVR_VCC and PPI_AVR_BUFF pin collections. This also abstracts
the polarity of these signals appropriately.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@628 81a1dc3b-b13d-400b-aceb-764788c761c2
Open the serial port with O_NONBLOCK, and save and restore the port
state before exiting.
patch #5008: Patch for (5.1) ser_posix.c for O_NONBLOCK open and
restoring serial port state on close
Closes bug #12622: avrdude hangs on macosx/darwin with PL-2303
usb-to-serial and Butterfly
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@627 81a1dc3b-b13d-400b-aceb-764788c761c2
main() into their own bitbang_check_prerequisites().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@626 81a1dc3b-b13d-400b-aceb-764788c761c2
definitions that are organized in pages.
* avr.c (avr_write_byte_default): Consider using the loadpage
instructions only if the respective memory is marked "paged".
Closes bug #17199: EEPROM fails verification on ATmega645 with
pony-stk200 hardware
Closes bug #16849: EEPROM write fails for AT90USB1287 with mode 0x41
Closes bug #15146: stk500v2_paged_write: loadpage instruction not
defined for part
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@622 81a1dc3b-b13d-400b-aceb-764788c761c2
option) as that is the programmer actually supported by
avrdude.conf.in.
Closes bug #15677: documentation mentions wrong programmer-id "avrispmk2"
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@621 81a1dc3b-b13d-400b-aceb-764788c761c2
AVR910 and AVR109. Change avr910_devcode of the ATtiny2313 to 0x5e
(ATtiny26).
Closes bug #16671: Tiny2313 avr910_devcode is bad
Closes bug #15826: avr910 device type for ATmega8 wrong
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@620 81a1dc3b-b13d-400b-aceb-764788c761c2
lock memory spaces of all devices where they have been missing. Add
the lock memory space to the ATmega48 section.
Closes bug #14920: tiny2313 fuses and AVRDUDE 5.0
Closes bug #15751: atmega48: no lock bits defined
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@619 81a1dc3b-b13d-400b-aceb-764788c761c2
* ppiwin.c (gettimeofday): Define gettimeofday() replacement
only if !defined(HAVE_GETTIMEOFDAY); use correct protype.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@616 81a1dc3b-b13d-400b-aceb-764788c761c2
always display the minor number as two digits. Examine the response
to the sign-on command to see which programmer hardware we are talking
to, and then restrict the STK500 topcard display to devices detected
as STK500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@614 81a1dc3b-b13d-400b-aceb-764788c761c2
config_gram.h from the source distribution archive. These files are
supposed to be generated on the target system.
Closes bug #15536: avrdude-5.1 compilation fails on Gentoo/amd64
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@613 81a1dc3b-b13d-400b-aceb-764788c761c2
AVR068 is right, and stk500.exe is wrong. (This reverts rev 1.19)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@611 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4539: Ability to control the bit clock (usleep) delay
for ppi interface
* bitbang.c: Implement bitbang_delay() and its calibration.
* bitbang.h: Declare bitbang_delay().
* main.c: Add the ispdelay option (-i).
* pgm.h (struct programmer_t): Add the ispdelay parameter.
* par.c: Add calls to bitbang_delay() when requested.
* serbb_posix.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* avrdude.1: Document the new -i option.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@610 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c (stk500v2_open): patch #5273: Emit error message
if user requests usb and no libusb support
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@608 81a1dc3b-b13d-400b-aceb-764788c761c2
files, and produce an avrdude.conf[.in] snippet.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@603 81a1dc3b-b13d-400b-aceb-764788c761c2
macro to add this library to, to prevent it from being
automatically linked to all binaries. This should fix the Win32
build of loaddrv.
* Makefile.am (avrdude_LDADD): add LIBUSB here.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@602 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix the non-paged write operations for old AVRs.
In avrdude.conf.in, use the new PP mode parameters; add PP mode
definitions for AT90S8515.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@591 81a1dc3b-b13d-400b-aceb-764788c761c2
as it is only used there (for the AVRISP mkII).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@590 81a1dc3b-b13d-400b-aceb-764788c761c2
Eliminate pagebuf, and use stack-allocated buffers instead. The
pagesize of all current AVRs is at most 256 only anyway, and this is
unlikely to change with the STK500v2 protocol. The previous pagebuf
implementation suffered from some possible buffer overrun.
In stk500pp_write_page(), do always write full pages, rather than
attempting to write a partial last page which did not get written at
all. Fill the remaining bytes with 0xff.
For (paged) write operations, correctly synthesize the mode byte.
This mode byte is very different from the ISP mode byte (sigh).
In stk500pp_read_byte(), when performing read operations on paged
memory, start reading at the previous page boundary rather than the
current address.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@589 81a1dc3b-b13d-400b-aceb-764788c761c2
give the full name of the respective memory area, instead of
the (possibly abbreviated) name the user typed in the -U option.
(Previous attempt in rev 1.110 was obviously not complete.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@588 81a1dc3b-b13d-400b-aceb-764788c761c2
Document ATmega256x support. Also document Solaris port defaults
in avrdude.texi.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@584 81a1dc3b-b13d-400b-aceb-764788c761c2
jtag2 and bitbang programmers are working, stk500v2
still needs to be done.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@581 81a1dc3b-b13d-400b-aceb-764788c761c2
Add the "atisp" programmer entry that makes use of negated signals.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@578 81a1dc3b-b13d-400b-aceb-764788c761c2
The 64 KB devices are actually guessed, as the datasheet and XML
files obviously contain a number of errors there.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@576 81a1dc3b-b13d-400b-aceb-764788c761c2
Contributed by Wim Lewis, add support for checking device
signatures in detail (patch #4924 and #4925)
* avrdude.conf.in: Add signatures
* avrpart.c: Set default signature
* avrpart.h: Variable for signature
* config_gram.y: More signature reading
* lexer.l: Define that signatures exist
* main.c: Read signatures and check them against hardware
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@573 81a1dc3b-b13d-400b-aceb-764788c761c2
Which stops sck from being writtend needlessly
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@568 81a1dc3b-b13d-400b-aceb-764788c761c2
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
ATmega48/88/168; the datasheet is a bit off here as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@560 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4459: Fix for rpm package builds
* avrdude.spec.in: update the RPM spec file:
- Default to enable-doc=yes during configure.
- Move info file to docs package.
- Make building of docs package conditional. Basic
idea copied from avr-gcc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@558 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix bug #15013: Wrong use of PPICLAIM (kernel: ppdev0: claim the
port first)
* par.c: don't claim/release here (thus win_ppdev.h not needed
anymore)
* ppi.c: claim/release here.
* freebsd_ppi.h: ppi_claim/ppi_release now take an fd as parameter.
* solaris_ecpp.h: (Ditto.)
* linux_ppdev.h: (Ditto.) (Also add copyright.)
* win_ppdev.h: Not needed anymore, remove.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@557 81a1dc3b-b13d-400b-aceb-764788c761c2
Beautify Colin's recent entries while being here.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@551 81a1dc3b-b13d-400b-aceb-764788c761c2
While Solaris' lex understands start conditions, they cannot be grouped,
so unfold the <strng> group.
All actions need braces, even if they only consist of a comment.
As the classic lex uses semi-static resource allocation, we need to bump
the resource limits quite a bit.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@541 81a1dc3b-b13d-400b-aceb-764788c761c2
two-step declaration, and first define token_p to be a token_t *,
and then define YYSTYPE to token_p. That works around a bug in
Solaris' yacc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@540 81a1dc3b-b13d-400b-aceb-764788c761c2
* Makefile.am: distclean avrdude.conf.
* avrdude.conf.in: make the parallel-port programmers optional.
* bitbang.c: move the bitbang features out into PROGRAMMER.
* configure.ac: introduce --enable-parport, add Solaris.
* lexer.l: replace str by strng to work around problems in some
versions of flex.
* main.c: move getexitspecs into the respective programmer's
domain; replace rindex by the C-standard strrchr.
* par.c: make parallel port optional.
* par.h: everything but par_initpgm() is private now.
* pgm.h: add setping/getping/highpulsepin/getexitspecs.
* serbb_posix.c: generalize bitbang interface; replace
cfmakeraw() by explicit code.
* serbb_win32.c: generalize bitbang interface.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@539 81a1dc3b-b13d-400b-aceb-764788c761c2
wide tty output. Document a trick to find out about the serial
numbers of all JTAG ICEs attached to USB.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@534 81a1dc3b-b13d-400b-aceb-764788c761c2
. use the correct endpoint, depending on whether we are going to read
or write
. when opening the USB device, set the configuration according to the
config entry, and properly claim the interface
. when closing, release the interface again
With these changes, it works now with libusb-win32 as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@533 81a1dc3b-b13d-400b-aceb-764788c761c2
give the full name of the respective memory area, instead of
the (possibly abbreviated) name the user typed in the -U option.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@529 81a1dc3b-b13d-400b-aceb-764788c761c2
string. Actually evaluate that number as microseconds then, as the
documentation used to state already.
While being there, re-sort the -s option into alphabetical order.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@527 81a1dc3b-b13d-400b-aceb-764788c761c2
Document the addition of the latest safemode update in the change log.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@522 81a1dc3b-b13d-400b-aceb-764788c761c2
will be available in the upcoming avrdude release.
His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
doc/avrdude.texi: (Ditto.)
Closes bug #13501: <memtype> should be listed in the man page
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@500 81a1dc3b-b13d-400b-aceb-764788c761c2
gratitous API change in recent versions of texi2html where
the output directory has changed names.
Fix for:
bug #13026: The build fails with texi2html 1.76
bug #12715: make issues during install
patch #3091: commandline fix for latest version of texi2html
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@499 81a1dc3b-b13d-400b-aceb-764788c761c2
synchronizing against a JTAG ICE in weird state.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@497 81a1dc3b-b13d-400b-aceb-764788c761c2
that way. ;-) For those who want the 19200 Bd one, add "jtag2slow".
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@495 81a1dc3b-b13d-400b-aceb-764788c761c2
appears to have a complete XML description right now.
Document all the recently added new devices: AT90PWM2/3,
ATmega164/324/644, ATmega329x/649x, ATtiny25/45/85.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@489 81a1dc3b-b13d-400b-aceb-764788c761c2
all the details right now, so some of the parameters are guessed.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@487 81a1dc3b-b13d-400b-aceb-764788c761c2
changes to butterfly.c include:
. do not exit for unsupported devices but return -1 from the init function
instead; that way the -F option can be used to continue anyway
. honor the -b option as arbitrary bootloaders could be implemented with
any baud rate, not just the fixed 19200 Bd used by the butterfly
. implement functionality to read the fuse and lock bits, and write the
(boot) lock bits, resp.
. fix the signature byte order
The remaining files document the new functionality.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@486 81a1dc3b-b13d-400b-aceb-764788c761c2
to have problems sending a control message (returns an "I/O error").
At least try to recover gracefully in the bening case where the user
did not request a particular serial number, so we could continue
anyway without knowing it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@481 81a1dc3b-b13d-400b-aceb-764788c761c2
mkII.
The serial transport methods have been moved out into a record of
function pointers for that purpose, defaulting to the actual serial
connection that natively applies to the hosting system. Iff inside
the JTAG ICE mkII handler a port name starting with "usb" has been
detected, the record of function pointers is switched to USB.
Optionally, a serial number might be specified, so only the JTAG ICE
mkII matching the given serial number will be opened. The match is
done right-to-left, so only the least significant bytes of the serial
number need to be given.
In order to make the change as least intrusive to existing drivers as
possible, the entire naming scheme of the serial_foo() function entry
points has been maintained as access macros that encapsulate these
into the respective indirect function calls via serdev->foo().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@478 81a1dc3b-b13d-400b-aceb-764788c761c2
Iff enter_progmode failed with RSP_ILLEGAL_JTAG_ID, give the user a
hint that their JTAGEN fuse might be unset.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@476 81a1dc3b-b13d-400b-aceb-764788c761c2
Joerg Wunsch
Eric Weddington
Colin O Flynn
Brian S. Dean