Commit Graph

21 Commits

Author SHA1 Message Date
joerg_wunsch 097ca1468f libusb-win32 recently changed the name of their header file from usb.h
to lusb0_usb.h (for whatever reason).  Autoprobe for the filename
during configure, and include whatever is appropriate.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1043 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-01-20 09:39:56 +00:00
joerg_wunsch 358961e07e Bump timeout values to allow for slow clock speeds. Ideally, the
timeout should depend on the selected clock speed, but changing the
API for that would require quite some effort throughout the entire
code base.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@954 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-05-11 20:42:27 +00:00
springob fcce4d2de3 * serial_open() calls will now return -1 on error (no call to exit())
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@948 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-10-22 14:29:56 +00:00
dhoerl 3e7897371a * fileio.c: ihex2bin did not properly handle files > 64K bytes
* usb_libusb.c: re-enabled usb_reset for Macs (no reset causes lots of failures)
* avrdude.1: spacing issue for ucr2 fixed.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@880 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-11-29 20:19:15 +00:00
dhoerl e984f82979 bug #22271 (project avrdude) - disable usb_reset() for Macs (was just FreeBSD)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@873 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-22 19:48:01 +00:00
dhoerl 933b26e875 AVR32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@855 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 20:09:59 +00:00
joerg_wunsch 5b51a2fdcb usbdev_close(): Repair the logic around the
conditional compilation of usb_reset() introduced in r798.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@841 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-08-17 04:15:08 +00:00
joerg_wunsch 4f4b1bce93 Submitted by Nick Hibma:
bug #22271: usb_reset in usb_libusb.c not necessary in FreeBSD 6.x
* usb_libusb.c (usbdev_close): Do not call usb_reset() on FreeBSD.
It is not necessary there.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@798 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 17:09:53 +00:00
joerg_wunsch 48d2691469 #undef interface for Win32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@770 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-29 22:10:11 +00:00
joerg_wunsch 8b391a8150 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
joerg_wunsch 1cae809b9b Something I always wanted to do: replace all those private "extern"
declarations in each file by a central header file "avrdude.h".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 21:07:54 +00:00
joerg_wunsch 31fa98b708 Make the code compile warning-free:
- declare a dummy "struct timezone" for some Win32 systems (MinGW)
- fix a few printf() argument types
- get rid off the prevailing "all filedescriptors are of type int"
  attitude

The last item required a large sweep across the code, in order to
replace all "int fd"s by "struct filedescriptor *fd"s, and pass
pointers (as we cannot pass a union directly).  In return, the
code is now supposed to be fully 64-bit safe, rather than relying
on a 64-bit pointer being converted to a (32-bit) int and back
to a pointer as we did previously.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@694 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 12:47:35 +00:00
joerg_wunsch 0e4819c0e7 Implement a flags field in struct serdev, and populate it with a flag
that indicates whether the underlying communication can dynamically
change its speed or not.  This flag is set for true serial
communication but clear for USB communication.  Don't try to adjust
the speed when talking over a communication channel that doesn't
support it.  (The Dragon does not even support the respective
parameter.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@676 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-27 08:45:47 +00:00
joerg_wunsch eadc4af2e0 Replace David's email address by his full name in the copyrights.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@565 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-01-12 23:24:35 +00:00
joerg_wunsch 108793bc7a Contributed by dcm@mit.edu: add support for the
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-01-12 23:13:50 +00:00
joerg_wunsch 818aafe4fc A number of fixes for the libusb handling:
. use the correct endpoint, depending on whether we are going to read
  or write
. when opening the USB device, set the configuration according to the
  config entry, and properly claim the interface
. when closing, release the interface again

With these changes, it works now with libusb-win32 as well.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@533 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-26 12:19:01 +00:00
joerg_wunsch cf046b8f9d * usb_libusb.c (usbdev_drain): actually implement draining to aid
synchronizing against a JTAG ICE in weird state.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@497 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-16 15:01:52 +00:00
joerg_wunsch 0f725dd0b0 Consitently use unsigned char for buffers to avoid warnings.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@492 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-08-30 04:44:29 +00:00
joerg_wunsch 4c60d60f86 On one of my systems (a not-too-current FreeBSD 5.x), libusb appears
to have problems sending a control message (returns an "I/O error").
At least try to recover gracefully in the bening case where the user
did not request a particular serial number, so we could continue
anyway without knowing it.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@481 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-07-25 19:52:20 +00:00
joerg_wunsch 888273589d Remove the check for the root dev. The required functionality is only
available in recent versions of libusb, and the check isn't really
needed anyway (as the check for vendor and product ID will cover that
as well).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@479 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-20 18:12:04 +00:00
joerg_wunsch 2d236ed812 Implement and document a libusb-based USB transport for the JTAG ICE
mkII.

The serial transport methods have been moved out into a record of
function pointers for that purpose, defaulting to the actual serial
connection that natively applies to the hosting system.  Iff inside
the JTAG ICE mkII handler a port name starting with "usb" has been
detected, the record of function pointers is switched to USB.
Optionally, a serial number might be specified, so only the JTAG ICE
mkII matching the given serial number will be opened.  The match is
done right-to-left, so only the least significant bytes of the serial
number need to be given.

In order to make the change as least intrusive to existing drivers as
possible, the entire naming scheme of the serial_foo() function entry
points has been maintained as access macros that encapsulate these
into the respective indirect function calls via serdev->foo().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@478 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-19 21:38:03 +00:00