Commit Graph

51 Commits

Author SHA1 Message Date
joerg_wunsch 15fc8af421 First implementation of ATxmega support. By now, only the
PDI mode of the STK600 is supported.  Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 22:53:40 +00:00
joerg_wunsch 8b391a8150 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
joerg_wunsch eb27298b5d Submitted by <ladyada@gmail.com>:
Patch #6233: Add support for USBtinyISP programmer
* usbtiny.c: New file.
* usbtiny.h: (Ditto.)
* Makefile.am: Include usbtiny into the build.
* avrdude.conf.in: (Ditto.)
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the usbtiny support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@749 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 18:03:02 +00:00
joerg_wunsch 07c1079415 Major code cleanup.
- Make all internal functions "static".
- Make sure each module's header and implementation file match.
- Remove all library-like functionality from main.c, so only
  the actual frontend remains in main.c.
- Add C++ brackets to all header files.

That effectively leaves the various module C files as something like
an "avrdude library", with main.c being the currently only frontend
program for that library.  In theory, it should be possible to write
different frontends using the same library backend functions though.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@722 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 22:43:46 +00:00
joerg_wunsch 1cae809b9b Something I always wanted to do: replace all those private "extern"
declarations in each file by a central header file "avrdude.h".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 21:07:54 +00:00
joerg_wunsch 8bd117dccf Implement EEPROM access through debugWire.
* jtagmkII.c: Extend the jtagmkII_read_byte() and
jtagmkII_write_byte() methods to handle EEPROM through
debugWire.

* avrpart.h: Implement the "flash instruction" parameter.
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)

* avrdude.1: Document the EEPROM access through dW.
* doc/avrdude.texi: (Ditto.)

* tools/get-dw-params.xsl: Extend to extract the flash
instruction field.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@693 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-23 07:07:06 +00:00
joerg_wunsch 8ed8377442 Implement debugWire programming support. Several limitations are
imposed by debugWire itself, so effectively, only flash ROM can be
read and written.

Currently, the required changes to avrdude.conf.in are only present
for the ATtiny44.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@688 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 23:23:37 +00:00
joerg_wunsch c35b4481dc Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
joerg_wunsch 2f798223d1 Add support for the AVR Dragon (JTAG and ISP mode).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@675 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-26 21:14:10 +00:00
joerg_wunsch 2f73c4686e Add the "stk500generic" programmer that auto-probes for STK500
either firmware version 1 or 2.
* Makefile.am (avrdude_SOURCES): add the new files
stk500generic.c and stk500generic.h.
* avrdude.conf.in: Add the stk500generic programmer type, and
change the "stk500" entry to point to this programmer.
* config_gram.y: Add the stk500generic keyword.
* lexer.l: (Ditto.)
* stk500.c: Change the stk500v1 code to not call exit()
prematurely when failing to open the programmer, but instead
return an error status.
* stk500generic.c: (New file.) Stub programmer implementation.
Probe for either stk500v1 or stk500v2, and adjust the current pgm
appropriately.
* stk500generic.h: (New file.) Declare the public interface(s)
of stk500generic.c.
* doc/avrdude.texi: Document the changed behaviour of stk500.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@663 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-19 22:27:30 +00:00
joerg_wunsch 333be851b9 Contributed by Thomas Fischl: add support for USBasp.
patch #4686: Add support for USBasp, a simple USB programmer
* usbasp.c: New file, implement the USBasp driver.
* usbasp.h: New file, interface declarations for USBasp.
* Makefile.am: Wire the new files into the build.
* avrdude.conf.in: Add the usbasp programmer entry.
* config_gram.y: Add the usbasp token.
* lexer.l: (Ditto.)
* avrdude.1: Document the USBasp programmer.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@656 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-10 20:41:00 +00:00
joerg_wunsch f8796c29cc Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
joerg_wunsch e9b535423e Implement STK500 (v2) HVSP mode.
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-21 21:53:49 +00:00
joerg_wunsch 56d038560c Add more parameters for PP mode.
Fix the non-paged write operations for old AVRs.

In avrdude.conf.in, use the new PP mode parameters; add PP mode
definitions for AT90S8515.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@591 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-19 21:25:08 +00:00
joerg_wunsch 39ecfefa7d First stab at an implementation of the STK500 parallel programming
feature (v2 firmware only), named "stk500pp".  Still not yet
complete: EEPROM writes not working, documentation missing, only
ATmega16 parameters available in avrdude.conf.in, some parameters
not yet implemented.

* avrdude.conf.in: Add sample parameters for PP mode to ATmega16.
* avrpart.h: Add the parallel programming control parameters.
* avrpart.c: (Ditto.)
* config_gram.y: Add stk500pp configuration grammar.
* lexer.l: Add stk500pp token recognition.
* stk500v2.h: Add declaration for stk500pp_initpgm().
* stk500v2.c: Add stk500pp implementation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@587 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-16 21:30:14 +00:00
joerg_wunsch ebdce5f3ef Start implementing support for ATmega256x;
jtag2 and bitbang programmers are working, stk500v2
still needs to be done.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@581 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-05-23 22:27:43 +00:00
c_oflynn c3f6c7e21c 2006-02-27 Colin O'Flynn <coflynn@newae.com>
Contributed by Wim Lewis, add support for checking device
        signatures in detail (patch #4924 and #4925)
    * avrdude.conf.in: Add signatures
    * avrpart.c: Set default signature
    * avrpart.h: Variable for signature
    * config_gram.y: More signature reading
    * lexer.l: Define that signatures exist
    * main.c: Read signatures and check them against hardware


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@573 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-02-27 17:18:42 +00:00
joerg_wunsch dc2038e767 Initial import of JTAG ICE mkI support.
The very basic functionality (paged flash read/write, erase, terminal
mode reads, fuse writes) works fine.  There are still the following
issues right now:

. paged EEPROM write (i.e. through -U eeprom:w:...) only works on an
  erased EEPROM
. byte-access flash and EEPROM writes (i.e. in terminal mode) fail
. documentation needs to be updated still


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@547 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-25 06:14:06 +00:00
joerg_wunsch 811dd7d614 Make the lexer work with Solaris' (10) default lex(1).
While Solaris' lex understands start conditions, they cannot be grouped,
so unfold the <strng> group.

All actions need braces, even if they only consist of a comment.

As the classic lex uses semi-static resource allocation, we need to bump
the resource limits quite a bit.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@541 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-02 21:49:52 +00:00
joerg_wunsch 5564934a4e Make avrdude Solaris-compatible.
* Makefile.am: distclean avrdude.conf.
* avrdude.conf.in: make the parallel-port programmers optional.
* bitbang.c: move the bitbang features out into PROGRAMMER.
* configure.ac: introduce --enable-parport, add Solaris.
* lexer.l: replace str by strng to work around problems in some
versions of flex.
* main.c: move getexitspecs into the respective programmer's
domain; replace rindex by the C-standard strrchr.
* par.c: make parallel port optional.
* par.h: everything but par_initpgm() is private now.
* pgm.h: add setping/getping/highpulsepin/getexitspecs.
* serbb_posix.c: generalize bitbang interface; replace
cfmakeraw() by explicit code.
* serbb_win32.c: generalize bitbang interface.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@539 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-01 23:02:06 +00:00
joerg_wunsch d5464326e3 In lieu of Michael Holzt, add his serbb serial bit-bang code so it
will be available in the upcoming avrdude release.

His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-18 20:12:23 +00:00
joerg_wunsch 6ba0f493b4 Quite some cleanup of the JTAG ICE mkII stuff.
. Implement the new EECRAddress field in the device descriptor that is
  required by the 4.x firmware; make an uneducated guess about what
  firmware requires what length of device descriptor -- perhaps Atmel
  can be convinced to publish an official matrix for that.

. Specify EECR in the config file where required.  Obviously, only
  locations that differ from the 0x3c default are mentioned in the
  XML files, so by now, this only affects the AT90CAN128 for us.

. After clarification with Atmel, EnablePageProgramming should really
  default to 1, and only cleared if specified by an XML parameter.  So
  far, only the XML files for the ATmega256x and ATmega406 do specify
  it at all, and they specify a 1, too.

. Drop the entire OCDEN fuse heuristic.  If OCDEN is unprogrammed at
  startup, issue a warning that single-byte EEPROM updates won't be
  possible.  Leave it to the user to program the fuse if desired.
  That way, we won't run into any issue of prematurely wearing out the
  hfuse EEPROM cell.  Interestingly enough, this also solved the
  problem of the target not restarting from scratch upon sign-off.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@461 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:06:23 +00:00
joerg_wunsch b49dc8f645 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
bdean e4f8608da4 Update code copyrights.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@438 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:52:45 +00:00
hinni 1fe6d367ce * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates
* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@398 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:36:44 +00:00
bdean 885d915a1c Add support for the Atmel Butterfly board which talks to the
Butterfly's supplied bootloader firmware.

Contributed by: Michael Mayer <michael-mayer@gmx.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@387 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 15:16:48 +00:00
troth 58f2a417cb * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if
available.
* avr910.c (avr910_vfy_cmd_sent): New function.
(avr910_chip_erase): Add support for chip erase.
(avr910_enter_prog_mode): New function.
(avr910_leave_prog_mode): New function.
(avr910_initialize): Add code to select device type and enter prog mode.
(avr910_close): Leave programming mode before closing serial port.
(avr910_read_sig_bytes): New function.
(avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer.
* avrdude.conf.in: Add note about deprecating devicecode.
Change all occurences of devicecode to stk500_devcode.
Add avr910_devcode to a few parts for testing.
* avrpart.h (struct avrpart): Change devicecode field to stk500_devcode.
(struct avrpart): Add avr910_devcode field.
* config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens.
Generate an error if devicecode is found in the config file.
Handle parsing of avr910_devcode and stk500_devcode.
* lexer.l: Handle parsing of avr910_devcode and stk500_devcode.
* pgm.c: Initialize pgm->read_sig_bytes field.
* pgm.h: Add pgm->read_sig_bytes field.
* stk500.c: Use stk500_devcode instead of devicecode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@293 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-17 06:20:02 +00:00
troth ae3f4e852f * avrdude.conf.in: Add avr910 and pavr programmers.
* config_gram.y: Add parsing of avr910 programmer.
* lexer.l: Add avr910 token.
* avr910.c: [this is still work in progress]
Add some debug output.
Add probe for programmer presense.
* main.c: Set port to default_serial if programmer type is avr910.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@292 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-16 18:19:37 +00:00
joerg_wunsch da3b460be6 Ignore \r as white space, to make the Windows people happy.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@241 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-27 16:42:56 +00:00
bdean 61ab2bc318 Introduce 'default_programmer' to the config file instead of requiring
one of the programmers to be tagged "default" within its definition.

Also, axe the notion of a compiled-in default programmer.  It is
kind've pointless now that nearly all configuration comes from the
config file, thus, avrdude is not very useful without the config file,
and thus, having a programmer compiled-in offers little or no benefit.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@218 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-21 21:07:43 +00:00
bdean 2c01281231 Add port name defaults to the config file instead of hard-coding.
This adds 'default_parallel' and 'default_serial' keywords to the
grammar, which take quoted string arguments.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@214 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-21 18:46:51 +00:00
bdean 2367f41d5f Add the ability to specify which pin to pulse when retrying entry into
programming mode.  Use 'retry_pulse' in the per-part specification
that can currently take values of 'reset' or 'sck', the default being
'sck' which preserves the previous behaviour.  Some newer parts
indicate that /RESET should be pulsed, while older parts say to pulse
SCK.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@212 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-21 17:24:47 +00:00
bdean 36195d4655 Add 'serial' and 'parallel' keywords to the grammar so that one can
say whether parts support these programming modes or not.  Possible
values for 'serial' are 'yes' or 'no'.  Possible values for 'parallel'
are 'yes', 'no', or 'pseudo'.  Add a bit mask of flags to the AVRPART
structure to capture these settings.  Use these within
stk500_initialize() to set the device parameters correctly.

Defaults for 'serial' and 'parallel' are 'yes' unless specified
otherwise.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@208 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-20 19:46:23 +00:00
bdean 9de52d215d Add a few parameters needed for parallel programming: assignment of
PAGEL and BS2 signals and the disposition of the reset pin
('dedicated' or 'io').


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@202 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-20 14:11:34 +00:00
troth 1997cc5188 These changes add basic support for a autoconf/automake based build system.
* .cvsignore: Ignore autoconf files.
	* AUTHORS: New file.
	* ChangeLog: New file.
	* Makefile: Removed file.
	* Makefile.am: New file.
	* NEWS: New file.
	* README: New file.
	* bootstrap: New file.
	* configure.ac: New file.
	* avr.c: Include ac_cfg.h (generated by autoconf).
	* config.c: Include ac_cfg.h.
	Include config_gram.h instead of y.tab.h.
	* config.h: If HAS_YYSTYPE is not defined, define YYSTYPE.
	* config_gram.y: Include ac_cfg.h.
	* fileio.c: Include ac_cfg.h.
	* lexer.l: Include config_gram.h instead of y.tab.h.
	* lists.c: Include ac_cfg.h.
	* main.c: Include ac_cfg.h.
	* par.c: Include ac_cfg.h.
	* pgm.c: Include ac_cfg.h.
	* ppi.c: Include ac_cfg.h.
	* stk500.c: Include ac_cfg.h.
	* term.c: Include ac_cfg.h.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@192 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-14 20:34:03 +00:00
bdean dca2176204 Split higher level parallel port programmer code off from ppi.c into
its own file par.c, leaving low level parallel port accessor routines
in ppi.c to help with portability.  Change the programmer type to
'PAR' now instead of 'PPI' - 'PAR' represents the parallel port
programmer type.

Be more liberal with 'static' function declarations within the
programmer implimentation files - these functions should never be
called directly - always use the programmer function references.

There are still a few places in 'main.c' that directly reference the
parallel programmer explicitly (par_getpinmask).  These should be
fixed somehow.

Axe a few unused functions.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@190 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-13 19:27:50 +00:00
troth 0ac9932d83 Define YY_NO_UNPUT to quell a compiler warning.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@187 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-12 17:46:24 +00:00
bsd 2c651eb7bf Makefile: include a target to automatically generate the dependency
list.

All others


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@177 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-08 04:17:25 +00:00
bsd 0982a48111 Add GPL.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@175 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 20:02:33 +00:00
bsd f983234f46 Get rid of the verbose printing of individual file CVS version ids.
This was intended to be used for identifying code in the field for
incoming bug reports, but I've never really found it all that useful.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@171 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 05:45:06 +00:00
bsd c1bcfe53a7 Change the name from AVRPROG to AVRDUDE.
This change represents a name change only.  There is currently an
effort to port AVRPROG to other platforms including Linux and Windows.
Since Atmel's programmer binary that's included within their AVR
Studio software is named AVRPROG.EXE on the Windows OS, there is the
chance for confusion if we keep calling this program AVRPROG as well.
Up until now the name hasn't really been a problem since there was no
chance to confuse 'avrprog' on Unix with Atmel's AVRPROG because
Atmel's tools only run on Windows.  But with the Unix 'avrprog'
possibly being ported to Windows, I felt a name change was the best
way to avoid problems.

So - from this point forward, my FreeBSD Unix program formerly known
as AVRPROG will subsequently be known as AVRDUDE (AVR Downloader/UploaDEr).

This change also represents a time when the AVRDUDE sources move from
my own private repository to a public repository.  This will give
other developers a chance to port AVRDUDE to other platforms and
extend its functionality to support additional programming hardware,
etc.

So goodbye AVRPROG, welcome AVRDUDE!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@170 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 05:13:32 +00:00
bsd da6e6490a4 Add basic support for STK500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@160 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 04:30:01 +00:00
bsd 580ff186eb Seperate programmer operations out into a driver-like interface so
that programmers other than the direct parallel port connection can be
supported.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@159 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-11-30 14:09:12 +00:00
bsd 4337d15fc4 Fix error reporting by avr_write_byte().
Fix setting of status LEDs under various write-fail conditions.

Add a flag to indicate that a memory type requires the device to
possibly be powered off and back on after a write to it.  This is due
to a hardware problem on some Atmel devices, see:

	http://www.atmel.com/atmel/acrobat/doc1280.pdf

Add greater verbosity to the part-display code when verbose>1 to
display avrprog's encoding of the defined programming instructions.
This is primarily for debugging purposes.


Part updates:

  * add the AT90S4414 part

  * add fuse and lock bit access instructions for the AT90S1200,
    AT90S4434, and AT90S8515.

  * add the pwroff_after_write flag to the fuse bits for the AT90S2333
    and AT90S4433 parts


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@123 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-02-14 02:48:07 +00:00
bsd 21694fbbaf Update version number. Update copyright.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@118 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-01-12 01:51:35 +00:00
bsd ba28dbd72a In interactive mode, reset the address and length if we start dumping
a memory type different than the previous one.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@103 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-21 18:54:11 +00:00
bsd efb9aaf8aa This is a jajor re-write of the programming algorithms. The Atmel
serial programming instructions are not very orthoganal, i.e., the
"read fuse bits" instruction on an ATMega103 is an entirely different
opcode and data format from the _same_ instruction for an ATMega163!
Thus, it becomes impossible to have a single instruction encoding
(varying the data) across the chip lines.

This set of changes allows and requires instruction encodings to be
defined on a per-part basis within the configuration file.  Hopefully
I've defined the encoding scheme in a general enough way so it is
useful in describing the instruction formats for yet-to-be invented
Atmel chips.  I've tried hard to make it match very closely with the
specification in Atmel's data sheets for their parts.  It's a little
more verbose than what I initially hoped for, but I've tried to keep
it as concise as I could, while still remaining reasonably flexible.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@100 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-21 02:46:55 +00:00
bsd 5abf255801 Fix (again, hopefully) page addressing for the ATMega parts.
Rename the poorly chosen name "bank" to "page" for page addressing.
Atmel calls it "page" in their documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@91 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-16 23:32:30 +00:00
bsd 1d67a8516f Add copyrights.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@85 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-15 02:46:59 +00:00
bsd 1426180b07 Try and detect an old-style config file and print an appropriate error
message and a suggestion for correcting it.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@81 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-15 00:11:56 +00:00