Commit Graph

129 Commits

Author SHA1 Message Date
Brian S. Dean 5df3b4188b Bump version number.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@101 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-21 02:47:59 +00:00
Brian S. Dean fb233af934 This is a jajor re-write of the programming algorithms. The Atmel
serial programming instructions are not very orthoganal, i.e., the
"read fuse bits" instruction on an ATMega103 is an entirely different
opcode and data format from the _same_ instruction for an ATMega163!
Thus, it becomes impossible to have a single instruction encoding
(varying the data) across the chip lines.

This set of changes allows and requires instruction encodings to be
defined on a per-part basis within the configuration file.  Hopefully
I've defined the encoding scheme in a general enough way so it is
useful in describing the instruction formats for yet-to-be invented
Atmel chips.  I've tried hard to make it match very closely with the
specification in Atmel's data sheets for their parts.  It's a little
more verbose than what I initially hoped for, but I've tried to keep
it as concise as I could, while still remaining reasonably flexible.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@100 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-21 02:46:55 +00:00
Brian S. Dean f1af5d3981 Add support for ATMega163.
Add support for reading/writing ATMega163 lock and fuse bits.
Unfortunately, in looking at the specs for other ATMega parts, they
use entirely different instruction formats for these commands.  Thus,
these routines won't work for the ATMega103, for example.

Add support for sending raw command bytes via the interactive terminal
interface.  This allows one to execute any programming instruction on
the target device, whether or not avrprog supports it explicitly or
not.  Thus, one can use this feature to program fuse / lock bits, or
access any other feature of a current or future device that avrprog
does not know how to do.

Add in comments, an experimental instruction format in the
configuration file.  If this works out, it would allow supporting new
parts and non-orthoganal instructions across existing parts without
making avrprog code changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@99 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-19 17:44:24 +00:00
Brian S. Dean 92835eb7a3 output formatting
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@97 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-11 01:58:21 +00:00
Brian S. Dean b9e5d16c95 Correct version string.
Update read/write status more frequently.
Prefix ATMega parts with an 'm'.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@95 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-31 02:18:08 +00:00
Brian S. Dean b1b4ac48d4 Fix an (non)exit.
Silence a couple of compiler warnings.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@89 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-16 02:50:27 +00:00
Brian S. Dean c934f8cc7a Fix ATMega flash addressing. Add an ATMEGA16 part. Perform sanity
checking on the memory parameters for parts that do bank addressing.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@88 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-16 02:47:55 +00:00
Brian S. Dean 3d8f8bcd45 Use lex/yacc for parsing the config file. Re-work the config file
format using a more human-readable format.

Read part descriptions from the config file now instead of hard-coding
them.

Update usage().

Cleanup unused code.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@79 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-14 23:17:26 +00:00
Brian S. Dean f73b0f9eba Style fixes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@77 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-13 03:13:13 +00:00
Brian S. Dean 42a81370c7 Commit changes in preparation for support the ATMega line.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@76 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-13 03:12:52 +00:00
Brian S. Dean 88b4c8c41f Remove debugging code - it served its purpose.
Update copyrights.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@72 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-01 14:04:46 +00:00
Brian S. Dean 88dafc434d Be sure to read the exit specs after the pin configuration has been
assigned, otherwise, we may apply the exit specs to the wrong pins.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@71 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-09-21 03:27:20 +00:00
Brian S. Dean 1b99818a03 debugging
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@70 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-09-21 02:57:58 +00:00
Brian S. Dean 3cdf00c76c Prefix pin config entries in the config file with a "c:". Later, I
might make part descriptions read in this way and we can use a
different letter for those (p).  This will make the parsing easier to
distinguish between the entry types.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@69 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-09-20 03:19:31 +00:00
Brian S. Dean 0b7551c3df Initialize pin configuration description.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@68 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-09-20 00:43:08 +00:00
Brian S. Dean 9003ed1183 Make the pin definitions configurable based on entries in a config
file.  This makes supporting other programmers much easier.

Rename AVRprog.pdf to avrprog.pdf.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@67 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-09-19 17:04:25 +00:00
Brian S. Dean f17016a7b8 Turn off ready led when finished programming.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@61 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-02-08 01:42:09 +00:00
Brian S. Dean 272c5ac849 update version
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@60 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-02-08 01:22:18 +00:00
Brian S. Dean ae3abef4a0 Correct a few comments.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@59 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-02-08 01:08:30 +00:00
Brian S. Dean aed00dfd26 Version 1.1
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@57 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-26 21:18:40 +00:00
Brian S. Dean 7a09e06e17 Hmmm ... cvs co -D <timestamp> does not work. Change the revision
timestamp to a full date/time value.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@56 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-26 20:45:05 +00:00
Brian S. Dean 26223415e6 Add a -V option to display the version information about each
component module.  This is intended for support purposes, so that I
can tell unambiguously what version a binary out in the field is.

Additionally, display a revision timestamp along with the version
number.  This also is intended for aiding in support and is the Unix
time of the latest component module.  Having this, should allow me to
do a "cvs co -D timestamp avrprog" and get exactly the source of the
version that is being reported.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@55 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-26 20:34:08 +00:00
Brian S. Dean 79356b2300 Fix a place where we were exiting without applying the exit-specs.
Wrap a long line.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@53 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-26 17:25:45 +00:00
Brian S. Dean eff6750e5c Move pin definitions to their own file.
First pass at providing feedback via the optionally connected leds.  I
don't actually have any of these attached to my programmer, so I can
only guess as whether this is toggling them on and off correctly.

Also, enable and disable the optional 74367 buffer.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@50 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-24 19:10:34 +00:00
Brian S. Dean fc56e6b4f9 Rearrange the pinout for the programmer to be a little more logical.
Provide hooks to support a buffered programmer, pin 6 is now used to
enable a buffer that can be used to isolate the target system from the
parallel port pins.  This is important when programming the target
in-system.

Totally change the way the pin definitions are defined.  Actually
set/clear pins based on the way more intuitive pin number, instead of
PPI data register, bit number combination.  A table of pin data is
used so that any hardware inversion done by the parallel port is
accounted for, what you set is actually what appears at the pin.
Retain the old method for handling Vcc, however, because the hold
method is much easier to use when setting / retrieving multiple pins
simultaneously.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@49 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-24 18:45:58 +00:00
Brian S. Dean e25bae098c Cosmetic, don't output a preceding linefeed for usage().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@46 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-22 02:12:12 +00:00
Brian S. Dean c06319e33c Return error codes instead of exiting, thus making sure that we exit
only via main() so that the exitspecs are properly applied.

When reading input data from a file, remember how many bytes were read
and write and verify only that many bytes.

Don't complain when an input file size is smaller than the memory size
we are programming.  This is normal.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@44 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-20 16:34:28 +00:00
Brian S. Dean 979d0d0254 Makefile : install the man page
main.c : drop the giant usage text now that we have a man page.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@42 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-20 04:28:49 +00:00
Brian S. Dean 4265bfa150 The program was getting too large for a single file. Split it up into
more modular pieces.

Also, accept command abbreviations as long as they are not ambiguous.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@38 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-19 02:46:50 +00:00