autoconfiguration figured out we need it. The private implementation
has already been protected that way.
This should finally really fix bug #17884: another gettimeofday
conflict under win32/cygwin
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@669 81a1dc3b-b13d-400b-aceb-764788c761c2
Add the CoreFoundation and IOKit framework linker flags on MacOS X
when configuring for USB support.
patch #4685: Libusb on MacOS X: detection and additional includes
Thanks to Matthias Ringwald for testing the reworked patch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@666 81a1dc3b-b13d-400b-aceb-764788c761c2
device codes, allow the user to override the device code
verification with the -F option.
* main.c: Make ovsigck a global variable.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@665 81a1dc3b-b13d-400b-aceb-764788c761c2
either firmware version 1 or 2.
* Makefile.am (avrdude_SOURCES): add the new files
stk500generic.c and stk500generic.h.
* avrdude.conf.in: Add the stk500generic programmer type, and
change the "stk500" entry to point to this programmer.
* config_gram.y: Add the stk500generic keyword.
* lexer.l: (Ditto.)
* stk500.c: Change the stk500v1 code to not call exit()
prematurely when failing to open the programmer, but instead
return an error status.
* stk500generic.c: (New file.) Stub programmer implementation.
Probe for either stk500v1 or stk500v2, and adjust the current pgm
appropriately.
* stk500generic.h: (New file.) Declare the public interface(s)
of stk500generic.c.
* doc/avrdude.texi: Document the changed behaviour of stk500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@663 81a1dc3b-b13d-400b-aceb-764788c761c2
AT90S1200 and the AT90S8515, fuse bit handling via ISP, and lock bit
reading via ISP are not supported at all. For the AT90S4414 (small
brother of the AT90S8515), add the ability to write the lock bits, and
add a definition for the fuse bits (usable for HV programming). For
the AT90S2313, add the "fuse" memory range, so it's available for HV
programming.
Resolves bug #17796: avrdude will not program or verify lockbits with
Atmel STK protocol programmers
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@662 81a1dc3b-b13d-400b-aceb-764788c761c2
* usbasp.c: Check for USBasp with new as well as old VID/PID
pair, warn the user about upgrading the firmware in case an
old one has been found.
* usbasp.h: Add new VID/PID.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@661 81a1dc3b-b13d-400b-aceb-764788c761c2
. high fuse has 8 bits
. there is an extended fuse (just one bit)
. the calibration area is only 1 byte
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@660 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4686: Add support for USBasp, a simple USB programmer
* usbasp.c: New file, implement the USBasp driver.
* usbasp.h: New file, interface declarations for USBasp.
* Makefile.am: Wire the new files into the build.
* avrdude.conf.in: Add the usbasp programmer entry.
* config_gram.y: Add the usbasp token.
* lexer.l: (Ditto.)
* avrdude.1: Document the USBasp programmer.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@656 81a1dc3b-b13d-400b-aceb-764788c761c2
and binary numbers.
Closes bug #16129: more output formats for fuse bits (avrdude
enhancement request)
* fileio.c: Implement fileio_num() and the itoa_simple() helper function.
* fileio.h: Add new file formats to FILEFMT.
* main.c: Parse the new file formats.
* avrdude.1: Document all this.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@654 81a1dc3b-b13d-400b-aceb-764788c761c2
requires the user to eventually restart AVRDUE from scratch then.
jtagmkII_reset() had to get a second parameter in order to record
the reset mode.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@647 81a1dc3b-b13d-400b-aceb-764788c761c2
still call the close method so we sign off correctly from the ICE:
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@646 81a1dc3b-b13d-400b-aceb-764788c761c2
Idea taken from patch #3172: Adds date and time of compile to usage
message
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@642 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4372: Better synchronization for stk500
Sync three times, and drop any noise inbetween.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@641 81a1dc3b-b13d-400b-aceb-764788c761c2
the old AVR910 device codes; we've got signature verification
now so better rely on that.
* avr910.c: Revert the signature bytes returned, as it already
happened in butterfly.c. This closes bug #14998: Signature Bytes
read in wrong order (avr910 mode)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@638 81a1dc3b-b13d-400b-aceb-764788c761c2
<andyw@pobox.com>.
Implements patch #4635: Add support for terminal/console servers for
serial programmers
* ser_posix.c: Add net_open(), and divert to it for net:host:port.
* ser_win32.c: Recognize net:host:port, and bail out.
* avrdude.1: Document the net:host:port connection option.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@635 81a1dc3b-b13d-400b-aceb-764788c761c2
Wait for the device's response after sending an "E" command.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@634 81a1dc3b-b13d-400b-aceb-764788c761c2
DB9 connector, and fix some related bugs in serbb_posix.c.
Closes bug #16265: dasa2 does not work under posix
* avrdude.conf.in: New serbb pin numbering; added "siprog"
as an alias for "ponyser".
* serbb_posix.c: New pin numbering, fix some confusion.
* serbb_win32.c: New pin numbering.
The generic and Posix-related parts of these changes have
been contributed by Hanns-Konrad Unger
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@632 81a1dc3b-b13d-400b-aceb-764788c761c2
DB9 connector, and fix some related bugs in serbb_posix.c.
Closes bug #16265: dasa2 does not work under posix
* avrdude.conf.in: New serbb pin numbering; added "siprog"
as an alias for "ponyser".
* serbb_posix.c: New pin numbering, fix some confusion.
* serbb_win32.c: New pin numbering.
The generic and Posix-related parts of these changes have
been contributed by Hanns-Konrad Unger
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@631 81a1dc3b-b13d-400b-aceb-764788c761c2
possible to extend them for other programmers than PPI now (serbb,
stk500*).
* pgm.h: Keep the exit specs in an abstract form inside struct
programmer_t. (Should be moved out into some programmer-specific
structure.) Rename the getexitspecs() method into
parseexitspecs().
* main.c: Move the exit specs stuff out to the programmer
implementation.
* par.c: Implement the new exit spec handling. Everything is now
done using the generic abstraction layer.
Closes bug #16443: No disable Resetsignal at the end of
Programming Session
Obviates need for patch #5057: quick and dirty Hack to unset Reset
after Programming
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@629 81a1dc3b-b13d-400b-aceb-764788c761c2
via the patch tracking system.
patch #5096: Allow VCC and BUFF to be any pin in parallel mode
* config_gram.y: Release the restriction to PPIDATA pins.
* par.c: Rework the code to introduce a function par_setmany()
that builds on top of par_setpin(), and use that function for the
PPI_AVR_VCC and PPI_AVR_BUFF pin collections. This also abstracts
the polarity of these signals appropriately.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@628 81a1dc3b-b13d-400b-aceb-764788c761c2
Open the serial port with O_NONBLOCK, and save and restore the port
state before exiting.
patch #5008: Patch for (5.1) ser_posix.c for O_NONBLOCK open and
restoring serial port state on close
Closes bug #12622: avrdude hangs on macosx/darwin with PL-2303
usb-to-serial and Butterfly
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@627 81a1dc3b-b13d-400b-aceb-764788c761c2
definitions that are organized in pages.
* avr.c (avr_write_byte_default): Consider using the loadpage
instructions only if the respective memory is marked "paged".
Closes bug #17199: EEPROM fails verification on ATmega645 with
pony-stk200 hardware
Closes bug #16849: EEPROM write fails for AT90USB1287 with mode 0x41
Closes bug #15146: stk500v2_paged_write: loadpage instruction not
defined for part
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@622 81a1dc3b-b13d-400b-aceb-764788c761c2
option) as that is the programmer actually supported by
avrdude.conf.in.
Closes bug #15677: documentation mentions wrong programmer-id "avrispmk2"
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@621 81a1dc3b-b13d-400b-aceb-764788c761c2
AVR910 and AVR109. Change avr910_devcode of the ATtiny2313 to 0x5e
(ATtiny26).
Closes bug #16671: Tiny2313 avr910_devcode is bad
Closes bug #15826: avr910 device type for ATmega8 wrong
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@620 81a1dc3b-b13d-400b-aceb-764788c761c2
lock memory spaces of all devices where they have been missing. Add
the lock memory space to the ATmega48 section.
Closes bug #14920: tiny2313 fuses and AVRDUDE 5.0
Closes bug #15751: atmega48: no lock bits defined
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@619 81a1dc3b-b13d-400b-aceb-764788c761c2
* ppiwin.c (gettimeofday): Define gettimeofday() replacement
only if !defined(HAVE_GETTIMEOFDAY); use correct protype.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@616 81a1dc3b-b13d-400b-aceb-764788c761c2
always display the minor number as two digits. Examine the response
to the sign-on command to see which programmer hardware we are talking
to, and then restrict the STK500 topcard display to devices detected
as STK500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@614 81a1dc3b-b13d-400b-aceb-764788c761c2
config_gram.h from the source distribution archive. These files are
supposed to be generated on the target system.
Closes bug #15536: avrdude-5.1 compilation fails on Gentoo/amd64
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@613 81a1dc3b-b13d-400b-aceb-764788c761c2
AVR068 is right, and stk500.exe is wrong. (This reverts rev 1.19)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@611 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4539: Ability to control the bit clock (usleep) delay
for ppi interface
* bitbang.c: Implement bitbang_delay() and its calibration.
* bitbang.h: Declare bitbang_delay().
* main.c: Add the ispdelay option (-i).
* pgm.h (struct programmer_t): Add the ispdelay parameter.
* par.c: Add calls to bitbang_delay() when requested.
* serbb_posix.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* avrdude.1: Document the new -i option.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@610 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c (stk500v2_open): patch #5273: Emit error message
if user requests usb and no libusb support
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@608 81a1dc3b-b13d-400b-aceb-764788c761c2
macro to add this library to, to prevent it from being
automatically linked to all binaries. This should fix the Win32
build of loaddrv.
* Makefile.am (avrdude_LDADD): add LIBUSB here.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@602 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@595 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix the non-paged write operations for old AVRs.
In avrdude.conf.in, use the new PP mode parameters; add PP mode
definitions for AT90S8515.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@591 81a1dc3b-b13d-400b-aceb-764788c761c2
Eliminate pagebuf, and use stack-allocated buffers instead. The
pagesize of all current AVRs is at most 256 only anyway, and this is
unlikely to change with the STK500v2 protocol. The previous pagebuf
implementation suffered from some possible buffer overrun.
In stk500pp_write_page(), do always write full pages, rather than
attempting to write a partial last page which did not get written at
all. Fill the remaining bytes with 0xff.
For (paged) write operations, correctly synthesize the mode byte.
This mode byte is very different from the ISP mode byte (sigh).
In stk500pp_read_byte(), when performing read operations on paged
memory, start reading at the previous page boundary rather than the
current address.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@589 81a1dc3b-b13d-400b-aceb-764788c761c2
give the full name of the respective memory area, instead of
the (possibly abbreviated) name the user typed in the -U option.
(Previous attempt in rev 1.110 was obviously not complete.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@588 81a1dc3b-b13d-400b-aceb-764788c761c2
Document ATmega256x support. Also document Solaris port defaults
in avrdude.texi.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@584 81a1dc3b-b13d-400b-aceb-764788c761c2
jtag2 and bitbang programmers are working, stk500v2
still needs to be done.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@581 81a1dc3b-b13d-400b-aceb-764788c761c2
Add the "atisp" programmer entry that makes use of negated signals.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@578 81a1dc3b-b13d-400b-aceb-764788c761c2
The 64 KB devices are actually guessed, as the datasheet and XML
files obviously contain a number of errors there.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@576 81a1dc3b-b13d-400b-aceb-764788c761c2
Contributed by Wim Lewis, add support for checking device
signatures in detail (patch #4924 and #4925)
* avrdude.conf.in: Add signatures
* avrpart.c: Set default signature
* avrpart.h: Variable for signature
* config_gram.y: More signature reading
* lexer.l: Define that signatures exist
* main.c: Read signatures and check them against hardware
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@573 81a1dc3b-b13d-400b-aceb-764788c761c2
Joerg Wunsch
Eric Weddington
Colin O Flynn