Commit Graph

42 Commits

Author SHA1 Message Date
joerg_wunsch e41d85664d Submitted by Lars Immisch:
patch #6750: Arduino support - new programmer-id
* arduino.c: New file, inherits stk500.c.
* arduino.h: New file.
* Makefile.am: Add arduino.c and arduino.h.
* config_gram.y: Add arduino keyword.
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)
* avrdude.1: Document the new programmer type.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@808 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-25 09:39:04 +00:00
joerg_wunsch 7905986046 Move term.[ch] from the library into the CLI application section, as
it is not useful for anything else but the CLI frontend.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@806 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-25 08:00:14 +00:00
joerg_wunsch 361943769e Contributed by Ville Voipio:
patch #6501: New autotools support for avrdude
* Makefile.am: add @WINDOWS_DIRS@ to SUBDIR
* bootstrap: allow for autconf-2.61 and automake-1.10, too
* configure.ac: fix @WINDOWS_DIRS@ recursion, replace
AC_PROG_CC by AM_PROG_CC_C_O, for esoteric reasons


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@774 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-25 21:06:55 +00:00
joerg_wunsch 8b391a8150 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
joerg_wunsch eb27298b5d Submitted by <ladyada@gmail.com>:
Patch #6233: Add support for USBtinyISP programmer
* usbtiny.c: New file.
* usbtiny.h: (Ditto.)
* Makefile.am: Include usbtiny into the build.
* avrdude.conf.in: (Ditto.)
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the usbtiny support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@749 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 18:03:02 +00:00
joerg_wunsch cf45cb52ab Add ChangeLog-2004-2006 to EXTRA_DIST.
Pointed out by Michael Holzt.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@745 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-06-27 20:44:25 +00:00
joerg_wunsch 3f8e4dfe8c Rearrange everything so it is now built into a libavrdude.a library,
and link main.c against that library.

Add AC_PROG_RANLIB to configure.ac as we are building a library now.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@723 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-25 20:51:11 +00:00
joerg_wunsch 07c1079415 Major code cleanup.
- Make all internal functions "static".
- Make sure each module's header and implementation file match.
- Remove all library-like functionality from main.c, so only
  the actual frontend remains in main.c.
- Add C++ brackets to all header files.

That effectively leaves the various module C files as something like
an "avrdude library", with main.c being the currently only frontend
program for that library.  In theory, it should be possible to write
different frontends using the same library backend functions though.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@722 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 22:43:46 +00:00
joerg_wunsch 1cae809b9b Something I always wanted to do: replace all those private "extern"
declarations in each file by a central header file "avrdude.h".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 21:07:54 +00:00
joerg_wunsch dfdd8c0ea5 * configure.ac: Improve the detection of the Win32 HID library,
and the presence of the header ddk/hidsdi.h.  It now works
correctly under Cygwin and several flavours of MinGW.

* Makefile.am: Add new LIBHID pattern.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@719 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-12 22:41:05 +00:00
joerg_wunsch 26e8bc656a Submitted by Christian Starkjohann:
patch #5507: Support for AVR-Doper USB programmer in HID mode

* configure.ac: Add hooks to detect the Win32 HID library,
as well as the existence of <ddk/hidsdi.h>.
* Makefile.am: Add new files.
* my_ddk_hidsdi.h: (New file.)
* ser_avrdoper.c: (New file.)
* serial.h: Add declaration for avrdoper_serdev.
* stk500v2.c: Add hook to divert to the AVR Doper code.
* avrdude.1: Document the AVR Doper support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@704 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-20 23:43:34 +00:00
joerg_wunsch 2f73c4686e Add the "stk500generic" programmer that auto-probes for STK500
either firmware version 1 or 2.
* Makefile.am (avrdude_SOURCES): add the new files
stk500generic.c and stk500generic.h.
* avrdude.conf.in: Add the stk500generic programmer type, and
change the "stk500" entry to point to this programmer.
* config_gram.y: Add the stk500generic keyword.
* lexer.l: (Ditto.)
* stk500.c: Change the stk500v1 code to not call exit()
prematurely when failing to open the programmer, but instead
return an error status.
* stk500generic.c: (New file.) Stub programmer implementation.
Probe for either stk500v1 or stk500v2, and adjust the current pgm
appropriately.
* stk500generic.h: (New file.) Declare the public interface(s)
of stk500generic.c.
* doc/avrdude.texi: Document the changed behaviour of stk500.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@663 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-19 22:27:30 +00:00
joerg_wunsch 333be851b9 Contributed by Thomas Fischl: add support for USBasp.
patch #4686: Add support for USBasp, a simple USB programmer
* usbasp.c: New file, implement the USBasp driver.
* usbasp.h: New file, interface declarations for USBasp.
* Makefile.am: Wire the new files into the build.
* avrdude.conf.in: Add the usbasp programmer entry.
* config_gram.y: Add the usbasp token.
* lexer.l: (Ditto.)
* avrdude.1: Document the USBasp programmer.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@656 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-10 20:41:00 +00:00
joerg_wunsch cba30c304f Add a dist-hook, and make it remove lexer.c, config_gram.c, and
config_gram.h from the source distribution archive.  These files are
supposed to be generated on the target system.

Closes bug #15536: avrdude-5.1 compilation fails on Gentoo/amd64


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@613 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-18 20:10:20 +00:00
joerg_wunsch e04281104f * configure.ac (AC_CHECK_LIB([usb]): implement a private LIBUSB
macro to add this library to, to prevent it from being
automatically linked to all binaries.  This should fix the Win32
build of loaddrv.
* Makefile.am (avrdude_LDADD): add LIBUSB here.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@602 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-11 16:00:12 +00:00
joerg_wunsch 108793bc7a Contributed by dcm@mit.edu: add support for the
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-01-12 23:13:50 +00:00
joerg_wunsch dc2038e767 Initial import of JTAG ICE mkI support.
The very basic functionality (paged flash read/write, erase, terminal
mode reads, fuse writes) works fine.  There are still the following
issues right now:

. paged EEPROM write (i.e. through -U eeprom:w:...) only works on an
  erased EEPROM
. byte-access flash and EEPROM writes (i.e. in terminal mode) fail
. documentation needs to be updated still


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@547 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-25 06:14:06 +00:00
joerg_wunsch 5564934a4e Make avrdude Solaris-compatible.
* Makefile.am: distclean avrdude.conf.
* avrdude.conf.in: make the parallel-port programmers optional.
* bitbang.c: move the bitbang features out into PROGRAMMER.
* configure.ac: introduce --enable-parport, add Solaris.
* lexer.l: replace str by strng to work around problems in some
versions of flex.
* main.c: move getexitspecs into the respective programmer's
domain; replace rindex by the C-standard strrchr.
* par.c: make parallel port optional.
* par.h: everything but par_initpgm() is private now.
* pgm.h: add setping/getping/highpulsepin/getexitspecs.
* serbb_posix.c: generalize bitbang interface; replace
cfmakeraw() by explicit code.
* serbb_win32.c: generalize bitbang interface.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@539 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-01 23:02:06 +00:00
joerg_wunsch d5464326e3 In lieu of Michael Holzt, add his serbb serial bit-bang code so it
will be available in the upcoming avrdude release.

His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-18 20:12:23 +00:00
joerg_wunsch 2d236ed812 Implement and document a libusb-based USB transport for the JTAG ICE
mkII.

The serial transport methods have been moved out into a record of
function pointers for that purpose, defaulting to the actual serial
connection that natively applies to the hosting system.  Iff inside
the JTAG ICE mkII handler a port name starting with "usb" has been
detected, the record of function pointers is switched to USB.
Optionally, a serial number might be specified, so only the JTAG ICE
mkII matching the given serial number will be opened.  The match is
done right-to-left, so only the least significant bytes of the serial
number need to be given.

In order to make the change as least intrusive to existing drivers as
possible, the entire naming scheme of the serial_foo() function entry
points has been maintained as access macros that encapsulate these
into the respective indirect function calls via serdev->foo().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@478 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-19 21:38:03 +00:00
joerg_wunsch b49dc8f645 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
bdean b0d0be4c49 Patch to disable the doc build by default; the tools needed to build
doc are either not available on all systems or are at best
inconvenient to build and install.  The doc can still be built, one
just needs to specify --enable-doc at configure time.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@445 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-02-10 14:54:57 +00:00
arcanum 747d7f4fd7 Add new files, safemode.c, safemode.h
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@441 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:26:12 +00:00
troth 3db30bb90e * Makefile.am (EXTRA_DIST): Remove avrdude.pdf since it is no longer supplied.
* NEWS: Fix typo.
* bootstrap: Delete the autom4te.cache dir before running the autotools.
* configure.ac (AC_INIT): Set version to 4.4.0.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@433 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-19 06:10:43 +00:00
troth 21341c082f * ChangeLog: Minor formatting cleanups.
Move to all 2003 entries to ChangeLog-2003.
* ChangeLog-2003: New file.
* Makefile.am: Update copyright year.
(EXTRA_DIST): Add ChangeLog-2003.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@402 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-26 06:27:41 +00:00
hinni c5d2aafb12 *avrpart.c,avr.c: Moved elementary functions on types OPCODE, AVRMEM and AVRPART from avr.c to new file avrpart.c
*avr.h: Removed prototypes for moved functions
*avrpart.h: Added prototypes for functions in avrpart.c
*Makefile.am: Added new file avrpart.c


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@388 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 16:42:10 +00:00
bdean 885d915a1c Add support for the Atmel Butterfly board which talks to the
Butterfly's supplied bootloader firmware.

Contributed by: Michael Mayer <michael-mayer@gmx.de>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@387 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-30 15:16:48 +00:00
troth 25116822c0 * Makefile.am: Change AM_CPPFLAGS to avrdude_CPPFLAGS.
Define avrdude_CFLAGS.
* configure.ac: Set ENABLE_WARNINGS to "-Wall" if using gcc.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@362 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-05 04:23:27 +00:00
troth 746f6f4421 * Makefile.am (avrdude_SOURCES): Add avr910.[ch], serial.h and
ser_posix.c files.
* avr910.c: New file (stubs for avr910 serial programmer).
* avr910.h: New file.
* ser_posix.c: New file.
* ser_win32.c: New file (just stubs for now).
* serial.h: New file.
* stk500.c: Move all the code for accessing the posix serial ports
into ser_posix. This will make a native win32 port easier and allows
the avr910 programmer to share the serial code.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@289 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-13 03:52:19 +00:00
troth edd634c6f6 * Makefile.am: Add CLEANFILES to remove all files from a make.
* doc/Makefile.am: Ditto


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@283 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-12 02:09:57 +00:00
troth e87bd8db17 * AUTHORS: Updated.
* CHANGELOG: Move contents to NEWS and remove file.
* ChangeLog: All of the changes for this year.
* ChangeLog-2001: All 2001 changes.
* ChangeLog-2002: All 2002 changes.
* Makefile.am (EXTRA_DIST): Remove CHANGELOG and and Change-200[12].
* NEWS: Moved contents of CHANGELOG file here.
* README: Add note pointing to savannah site.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@279 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-11 22:34:53 +00:00
troth 1633627f12 * Makefile.am (EXTRA_DIST): Add CHANGELOG.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@277 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-10 23:51:14 +00:00
troth c8da7420c9 * Makefile.am (SUBDIRS): Add doc dir.
* configure.ac (AC_CONFIG_FILES): Add doc/Makefile.
* doc/Makefile.am: New file.
* doc/avrdude.texi: Use automatically generated version.texi.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@245 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-03 01:09:52 +00:00
troth bc8d778632 * Makefile.am (EXTRA_DIST): Add avrdude.spec and make entries one per
line so future patches are obvious as to what changed.
* avrdude.spec.in: New file to support creation of binaries in rpm format.
* configure.ac (AC_OUTPUT): Add avrdude.spec.
	Reorder so that Makefile is the last entry.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@240 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-27 06:56:03 +00:00
troth 55d01ba7a7 * Makefile.am (SUBDIRS): Add windows dir.
* configure.ac: If $target is a windows system, build whats in windows sub dir.
* windows/Makefile.am: New file.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@239 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-26 00:14:54 +00:00
troth d0a60ef253 * ChangeLog: Point reader to the CHANGELOG file.
* Makefile.am (EXTRA_DIST): Rename avrdude.conf.sample to avrdude.conf.in.
	Remove avrdude.conf and distclean-local rules.
	Add install-exec-local and backup-avrdude-conf rules.
* avrdude.conf.in:
	Set default_parallel to "@DEFAULT_PAR_PORT@" for autoconf expansion.
	Set default_serial to "@DEFAULT_SER_PORT@" for autoconf expansion.
* configure.ac: Add call to AC_CANONICAL_{BUILD,HOST,TARGET} macros.
	Set DEFAULT_PAR_PORT and DEFAULT_SER_PORT based on $host.
	Add copyright header.
	Define avrdude_version so AC_INIT and AM_INIT_AUTOMAKE are sure
	to get the same version.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@238 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-25 00:57:27 +00:00
arcanum aac7d66784 Integrate Windows search of config files.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@231 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-24 23:13:55 +00:00
arcanum 3f4325b0ce Add ppiwin.c to avrdude_SOURCES.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@205 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-20 18:18:39 +00:00
troth 9e73540ea9 Add $srcdir to sample config filename so that building in a separate dir works.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@195 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-15 19:49:29 +00:00
joerg_wunsch ef7e3586c8 Only GNU make sets $< in non-inference rules, so rather explicitly
spell the source file(s) to remain compatible.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@194 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-15 14:16:10 +00:00
troth 38f0dd7a4d Add distclean rule and EXTRA_DIST list to get 'make distcheck' to succeed.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@193 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-14 22:19:42 +00:00
troth 1997cc5188 These changes add basic support for a autoconf/automake based build system.
* .cvsignore: Ignore autoconf files.
	* AUTHORS: New file.
	* ChangeLog: New file.
	* Makefile: Removed file.
	* Makefile.am: New file.
	* NEWS: New file.
	* README: New file.
	* bootstrap: New file.
	* configure.ac: New file.
	* avr.c: Include ac_cfg.h (generated by autoconf).
	* config.c: Include ac_cfg.h.
	Include config_gram.h instead of y.tab.h.
	* config.h: If HAS_YYSTYPE is not defined, define YYSTYPE.
	* config_gram.y: Include ac_cfg.h.
	* fileio.c: Include ac_cfg.h.
	* lexer.l: Include config_gram.h instead of y.tab.h.
	* lists.c: Include ac_cfg.h.
	* main.c: Include ac_cfg.h.
	* par.c: Include ac_cfg.h.
	* pgm.c: Include ac_cfg.h.
	* ppi.c: Include ac_cfg.h.
	* stk500.c: Include ac_cfg.h.
	* term.c: Include ac_cfg.h.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@192 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-14 20:34:03 +00:00