Commit Graph

486 Commits

Author SHA1 Message Date
Joerg Wunsch e10928ada9 Rename the BAUD_xxx baud rate defines to PAR_BAUD_xxx to avoid a name
clash with the Win32 API names for baud rates.

Reported by: Eric


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@462 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:48:05 +00:00
Joerg Wunsch 039fe615c0 Quite some cleanup of the JTAG ICE mkII stuff.
. Implement the new EECRAddress field in the device descriptor that is
  required by the 4.x firmware; make an uneducated guess about what
  firmware requires what length of device descriptor -- perhaps Atmel
  can be convinced to publish an official matrix for that.

. Specify EECR in the config file where required.  Obviously, only
  locations that differ from the 0x3c default are mentioned in the
  XML files, so by now, this only affects the AT90CAN128 for us.

. After clarification with Atmel, EnablePageProgramming should really
  default to 1, and only cleared if specified by an XML parameter.  So
  far, only the XML files for the ATmega256x and ATmega406 do specify
  it at all, and they specify a 1, too.

. Drop the entire OCDEN fuse heuristic.  If OCDEN is unprogrammed at
  startup, issue a warning that single-byte EEPROM updates won't be
  possible.  Leave it to the user to program the fuse if desired.
  That way, we won't run into any issue of prematurely wearing out the
  hfuse EEPROM cell.  Interestingly enough, this also solved the
  problem of the target not restarting from scratch upon sign-off.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@461 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:06:23 +00:00
Joerg Wunsch 6757ebee57 Revert the serial_recv() timeout handling as it used to be before my
yesterday's changes (i.e. before rev. 1.10 of ser_posix.c), that is,
exit(1) in case of a timeout.  Previously, the upper layers didn't see
the timeout at all.

Quite possible that some of these drivers could handle a timeout more
intelligently though.  At least for the rather sophisticated STK500v2
protocol, I think it should be possible to retry the request.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@460 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 17:09:22 +00:00
Joerg Wunsch 5cc4ed40bd Try reading/writing more than one byte at a time, to improve overall
performance.

Note that many consumers still read one byte at a time though.

This patch has once been submitted to me by Bernd Walter
<ticso@cicely.de>, minor tweak by me (mainly to get it running under
Linux, too).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@459 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 17:00:11 +00:00
Joerg Wunsch 6af6fe9b3a Make the retrier in case of rx timeouts more robust, by increasing
the receive timeout once a timeout happened.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@458 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 16:58:12 +00:00
Joerg Wunsch 6d05dfda8c Sorry, I accidentally spammed a local modification over the repository.
Backout rev 1.8 of bootstrap.h.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@457 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 21:06:44 +00:00
Joerg Wunsch df37b7faf5 I missed to commit the allowfullpagebitstream attributes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@456 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 21:04:55 +00:00
Joerg Wunsch 083406de7c Properly close commend in $ Id $.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@455 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 20:58:45 +00:00
Joerg Wunsch c136e38a1d serial_setattr() has been renamed to serial_setspeed().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@454 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 20:57:52 +00:00
Joerg Wunsch da412d2274 Oops, more files I forgot to add during the last commit.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@453 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:53:56 +00:00
Joerg Wunsch 546761708d I forgot to add these files in the previous commit. They are
basically obtained from Atmel's appnote AVR067.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@452 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:43:44 +00:00
Joerg Wunsch 872f75d4fb Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
Brian S. Dean c8b9561f1e Exit non-zero if safe-mode reverts fuse bits that were requested on
the command-line.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@450 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-02-11 19:03:53 +00:00
Brian S. Dean 8a2d4aa7f2 Variable declarations must only appear at the beginning of a block.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@449 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-02-10 18:37:37 +00:00
Brian S. Dean e77bacaac6 Document -u option to disable safe mode.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@448 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-02-10 18:03:32 +00:00
Brian S. Dean 3ad88ee11c Style police: white space only change; consistent indentation, wrap
long lines to < 80 columns.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@447 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-02-10 16:34:55 +00:00
Brian S. Dean aa3b5ee436 doc/Makefile is now dependent on whether or not doc is enabled.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@446 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-02-10 15:39:42 +00:00
Brian S. Dean 978b2bfa3b Patch to disable the doc build by default; the tools needed to build
doc are either not available on all systems or are at best
inconvenient to build and install.  The doc can still be built, one
just needs to specify --enable-doc at configure time.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@445 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-02-10 14:54:57 +00:00
Eric Weddington c3e97730b0 Entry for new Safe Mode feature.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@444 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:35:52 +00:00
Eric Weddington 4b5a5be064 Document new Safe Mode feature and switch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@443 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:26:14 +00:00
Eric Weddington 9482eea8b6 New file. Safe Mode support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@442 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:26:13 +00:00
Eric Weddington a11bc3dd8f Add new files, safemode.c, safemode.h
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@441 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:26:12 +00:00
Eric Weddington 27e53d7aac Add Safe Mode. Fuse settings will be restored at the end of a programming session unless the -u switch is specified.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@440 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:26:11 +00:00
Brian S. Dean c5cfb14c31 Replace my e-mail address with my url when displaying copyright
information.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@439 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 02:06:13 +00:00
Brian S. Dean 2f1ab78f45 Update code copyrights.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@438 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:52:45 +00:00
Brian S. Dean 95e9010c9e Add support for "Xilinx JTAG cable".
Contributed by: Tymm <tymm@booyaka.com>


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@437 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:30:30 +00:00
Brian S. Dean 5f5919e607 Add support for the AT90CAN128. Not sure if all the instruction
encoding is correct, specifically the address bits don't exactly match
those of the preliminary datasheet that I have, but I don't see how
they could be right.  Tested with STK500 and it works there.
Instruction encodings have not been tested due to lack of a parallel
port on my Mac.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@436 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-12-22 01:24:39 +00:00
Theodore A. Roth 6bf083fdb3 * avrdude.1: Remove reference to ppi programmer schematic.
* configure.ac (AC_INIT): Set version to "4.4.0cvs".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@435 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-19 22:09:09 +00:00
Theodore A. Roth fd510f0056 * Makefile.am (EXTRA_DIST): Remove avrdude.pdf since it is no longer supplied.
* NEWS: Fix typo.
* bootstrap: Delete the autom4te.cache dir before running the autotools.
* configure.ac (AC_INIT): Set version to 4.4.0.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@433 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-19 06:10:43 +00:00
Brian S. Dean d527d692f4 Make a note about now having MacOS X support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@432 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-18 14:09:41 +00:00
Jan-Hinnerk Reichert 15ec4ccfa6 avrdude.1: Fixed obvious copy and paste error (Patch #3199 contributed by Galen Seitz)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@431 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-17 15:41:36 +00:00
Theodore A. Roth 7fc5e2a7c2 * main.c (main): Don't indent CPP directives.
When showing update progress in a no tty situation, use unbuffered IO
for all systems, not just win32 native.
Update copyright year when printing version.
Remove warning about native win32 being experimental.
Split a line string.
* ppiwin.c: Update copyright year.
Add cvs Id keyword.
(usleep): Cleanup debug CPP directives to improve readability.
* ser_win32.c: Include <stdio.h> to fix failing build.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@430 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-15 17:29:35 +00:00
Theodore A. Roth bf9c6167e9 * AUTHORS: Add names of recent major contributors.
* ser_win32.c: Assign copyright to Martin J. Thomas since he did all
real work on this file.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@429 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-08 23:49:33 +00:00
Jan-Hinnerk Reichert 5f3c3869f8 NEWS, doc/TODO: Updated NEWS and TODO
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@428 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-07 10:13:25 +00:00
Jan-Hinnerk Reichert 46db932124 stk500.c, term.c, doc/avrdude.texi, avrdude.1: added "sck"-command to the terminal mode. This command allows slowing down of the SCK of STK500-programmers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@427 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-07 08:59:07 +00:00
Jan-Hinnerk Reichert d4e7f8fa07 Removed unnecessary includes of config.h
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@426 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-05 15:04:19 +00:00
Jan-Hinnerk Reichert 55e524871a avr.h: Removed some unused prototypes
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@425 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-05 14:10:15 +00:00
kiwi64ajs e14ffeda9d added log entry for Win32Native code merge
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@424 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-05 10:56:24 +00:00
Jan-Hinnerk Reichert 7ce38d550e ChangeLog: Fixed wrong date
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@423 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-04 12:13:48 +00:00
Jan-Hinnerk Reichert 277e1a1e7a stk500.c: Fixed fosc behaviour for values exceeding maximum frequency (contributed by Galen Seitz)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@422 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-04 12:13:02 +00:00
Jan-Hinnerk Reichert cecaa934f0 avrdude.conf.in: Added support for ATtiny2313 (contributed by Bob Paddock)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@421 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-04 12:09:29 +00:00
Joerg Wunsch e34df14b61 Fix writing the efuse bits for the ATmega169. The original pattern
was based on a typo in the datasheet which Atmel agreed is going to be
fixed.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@420 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-25 14:28:26 +00:00
kiwi64ajs ff618a3bcb merged in changes to allow native Win32 build with no cygwin DLL dependancy
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@419 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-24 11:05:07 +00:00
Jan-Hinnerk Reichert ecd94e0dbb avrdude.conf.in: Added support for tiny13 (contributed by Pawel Moll), mega48 and mega88 (contributed by Galen Seitz)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@418 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-22 17:38:54 +00:00
Brian S. Dean 86f80611d3 Update changelog.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@417 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-05-19 23:08:47 +00:00
Brian S. Dean 86b1947132 Allow the baud rate to be specified on the command line with a new -b
switch.  The specified baud rate will override the default serial port
baud rate for a particular programmer.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@416 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-05-19 23:00:38 +00:00
Brian S. Dean 86c7465611 Stub-out the ppi_* functions in ppi.c with empty wrappers that simply
return an error code when building on MacOS X.  This commit makes
AVRDUDE compile and run fine on my PowerMac G5 running MacOS X.  In
theory it would be possible to support parallel ports on the Mac using
a PCI multi-port card and/or USB<->Parallel converters.  If/when such
support is added we can flesh out these functions as needed, but for
now, only serial port programmers are currently supported.

Note that I tested avrdude on the G5/MacOS X with an STK500 programmer
and used a Keyspan model USA-19HS USB<->RS232 adapter device which
simply shows up in /dev as a POSIX serial port.  None of the serial
port handling needed any changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@415 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-05-19 21:02:25 +00:00
Brian S. Dean 3c3531b575 Remove old schematic.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@414 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-04-24 04:14:00 +00:00
Joerg Wunsch 2b3bfc1858 Drop the LISTSZ define as well as the check for it in lcreat(). They
were not needed at all, and got in the way when compiling on a 64-bit
host OS.

Suggested by: Brian S. Dean


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@413 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-04-23 20:36:00 +00:00
Jan-Hinnerk Reichert 266b92449f avr910.c: Hopefully fixed that weird "first byte not programmed"-error in a good way (previous fix was not working with all firmwares)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@412 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-04-17 19:37:14 +00:00