Commit Graph

1883 Commits

Author SHA1 Message Date
Dawid Buchwald 066f54fbfa Cleanup of POSIX serial init code 2022-02-19 18:00:58 +01:00
Dawid Buchwald de19f203e0 Smallest possible fix for PL2303HX 2022-02-19 15:07:32 +01:00
Jörg Wunsch d054c68b19
Merge pull request #878 from MCUdude/fix-pkob-target-voltage
Fix Curiosity Nano target voltage
2022-02-18 23:01:49 +01:00
Joerg Wunsch 5c90fbbaae PR #877 done 2022-02-18 22:53:45 +01:00
Jörg Wunsch c2fe68ef7d
Merge pull request #877 from MCUdude/jtag3-verbosity
Reduce jtag3 output verbosity
2022-02-18 22:38:40 +01:00
Hans c345985928
Merge branch 'avrdudes:main' into terminal-write 2022-02-18 22:09:42 +01:00
Joerg Wunsch c1ec836fbd PR #882 done 2022-02-18 21:37:27 +01:00
Jörg Wunsch ba01fd7e30
Merge pull request #882 from mariusgreuel/pr-libhid-cleanup-part1
Remove libhid support in ser_avrdoper.c in favor of libhidapi
2022-02-18 21:36:12 +01:00
Marius Greuel 59ecd4cc65 Remove libhid support in ser_avrdoper.c in favor of libhidapi 2022-02-18 20:05:52 +01:00
Marius Greuel e31be88ce0 Add LIB_LIBHID to CMake project to fix MinGW build issue 2022-02-18 19:58:13 +01:00
MCUdude 6e7f38e81f Properly handle negative numbers
Now -3.141592 and -32768 are valid numbers that's stored correctly in memory
2022-02-18 09:58:16 +01:00
MCUdude 10e05eed21 Require single quotes when writing characters 2022-02-18 09:58:16 +01:00
MCUdude 551046052e Add support for writing floats 2022-02-18 09:58:16 +01:00
MCUdude 2a92b8cce4 Add support for memory "fill" with arbitrary data too
If you run the following command: $ write eeprom 0x00 0x10 A B C ...

It will write the following data to EEPROM:
|ABCCCCCCCCCCCCCC|
starting from address 0x00
2022-02-18 09:58:16 +01:00
MCUdude c007dc7d24 Add support for writing single characters
Now this is possible: write eeprom 0x00 a b c d e f 0x80 0x90 ! H E L L O
2022-02-18 09:58:16 +01:00
MCUdude 2589b17640 Add support for memory "fill" mode
Syntax: write <memtype> <start addr> <no. byte to write> <byte to write> ...
2022-02-18 09:58:13 +01:00
MCUdude 19e2cae053 Add Curiosity Nano to terminal list 2022-02-14 10:30:21 +01:00
MCUdude 932f68f24c Set target voltage even thoug not target is detected 2022-02-14 10:28:54 +01:00
MCUdude b1d34a510c Reduce jtag3 output verbosity 2022-02-13 19:23:48 +01:00
MCUdude f2bdcbe977 Add missing USBtiny derived programmers
ArduinoISP and the Arduino.org ISP are commercial versions of the USBtiny programmer with different USB VIDs/PIDs
2022-02-11 22:46:11 +01:00
Joerg Wunsch 7b79b72794 PR #872 done 2022-02-11 22:17:24 +01:00
Jörg Wunsch 76a17be4d0
Merge pull request #872 from MCUdude/jtag-string-formatting
Tweak programmer info formatting strings
2022-02-11 22:16:39 +01:00
MCUdude 80f1d96e07 Tweak programmer info formatting strings
Now all colons are on a straight line, just like #853 did to all jtag3 compatible programmers
2022-02-11 22:10:52 +01:00
Joerg Wunsch 09fe08e51c PR #853 done 2022-02-11 21:45:31 +01:00
Jörg Wunsch f2c73c2bb8
Merge pull request #853 from MCUdude/jtag3-clock-update
Print JTAG3 clocks after configuration + string formatting
2022-02-11 21:44:54 +01:00
MCUdude b581d14823 String formatting
Allign colons, only print clocks that are actually present (>0 kHz)
2022-02-11 21:35:07 +01:00
Joerg Wunsch 354a1c4f1f PR #869 closed 2022-02-11 21:17:01 +01:00
Jörg Wunsch 23a09a6197
Merge pull request #869 from MCUdude/alias-memories
Add fuse name aliases to avrdude.conf + tweak update.c
2022-02-11 21:15:34 +01:00
MCUdude 3fc39c47ad Print memory name alias together with the canonical name if present
in avrdude.conf. An example would be "avrdude: reading fuse0/wdtcfg memory:"
2022-02-11 21:10:05 +01:00
MCUdude d6ccf7a3ff Add memory alias names for megaAVR0/tinyAVR0,1,2/AVR-Dx/AVR-Ex fuses 2022-02-10 22:34:33 +01:00
Joerg Wunsch 452f673f38 Back out the last "alias" commit (search for existing alias).
It breaks the alias handling completely as the search happens
way too late. So instead, just keep any possibly duplicate
name as it won't be in our way anyway.
2022-02-10 21:26:05 +01:00
Joerg Wunsch 38a3af37e2 Mention PRs #863 and #868. 2022-02-10 20:39:51 +01:00
Jörg Wunsch d134dc8fff
Alias keyword (#868)
Implementation for an "alias" keyword.

By now, only applied inside memory descriptions.

* Make "mem_alias" a separate nonterminal.

The previous implementation attempt caused a syntax error in
yacc code, and separating mem_alias on the same level as
mem_spec appears to be the cleaner solution anyway.

* Maintain real memory aliases.

Instead of duplicating the aliased memory with a new name, maintain a
second list of memory aliases (per device) that contains a pointer to
the memory area it is aliased to. That way, a memory name can be
clearly distinguished between the canonical one and any aliases.

* Check p->mem_alias != NULL before touching it

* Add avr_find_memalias()

This takes a memory region as input, and searches whether an
alias can be found for it.

* We need to add a list structure for the mem_alias list, always.

By that means, mem_alias won't ever be NULL, so no need to check
later.

Also, in avr_dup_part(), duplicate the alias list.

* In a memory alias, actually remember the current name.

* In avr_dup_part(), adjust pointers of aliased memories

While walking the list of memories, for each entry, see if there is an
alias pointing to it. If so, allocate a duplicated one, and fix its
aliased_mem pointer to point to the duplicated memory region instead
of the original one.

* Add avr_locate_mem_noalias()

When looking whether any memory region has already been defined for
the current part while parsing the config file, only non-aliased names
must be considered. Otherwise, a newly defined alias would kick out
the memory definition it is being aliased to.

* When defining a mem_alias, drop any existing one of that name.

* Actually use avr_find_memalias() to find aliases

* Add declaration for avr_find_memalias()

* When defining a memory, also search for an existing alias

If the newly defined name has the same as an existing alias, the alias
can be removed.

Note that we do explicitly *not* remove any memory by the same name of
a later defined alias, as this might invalidate another alias'es
pointer. If someone defines that, the alias name just won't ever be
found by avr_locate_mem().
2022-02-10 20:39:19 +01:00
Jörg Wunsch ba314f23e9
Merge pull request #863 from MCUdude/jtag3-read-memory-alias
Add support for reading from more memory sections
2022-02-10 20:35:06 +01:00
MCUdude a43f220ef9 Add support for reading from more memory sections
It's now possible to read the following memories if present: osccal16, osccal20, tempsense, osc16err, osc20err
2022-02-07 21:51:35 +01:00
Joerg Wunsch 1c0b70da89 PR #859 done 2022-02-05 22:03:59 +01:00
Jörg Wunsch b6a6c681df
Merge pull request #859 from dl8dtl/safemode-removal
Remove the "safemode" feature.
2022-02-05 22:03:12 +01:00
Joerg Wunsch 3eda1d15f9 Mention PR #858 2022-02-05 21:59:04 +01:00
Marius Greuel c6438532f0
Merge pull request #858 from yegorich/cmake-install-fix
CMake: use CMAKE_CURRENT_BINARY_DIR to locate avrdude.conf
2022-02-05 21:46:38 +01:00
Joerg Wunsch 6fd68ed7fe Mention Hans Eirik Bull for his recent contributions 2022-02-01 23:26:20 +01:00
Joerg Wunsch 36de84ab48 Mention Dawid and Marius for their recent contributions. 2022-02-01 20:35:15 +01:00
Joerg Wunsch 8c6c6a14ec Remove the "safemode" feature.
This feature has been designed with the sometimes quite flakey direct
(parallel or serial port attached) bitbang programming adapters in
mind that were quite common about two decades ago.

With parallel ports vanishing from modern PCs almost completely, and
the advent of various USB-attached low-cost programming devices,
this class of programmers disappeared almost completely.

Furthermore, the fuse combinations that were covered by the feature
are no longer around on all recent AVR devices, so for an ever
increasing number of devices, safemode already became meaningless and
was turned off anyway.

With the prospective version 7.x release, it's a good point in time to
introduce a major change like this one.
2022-01-31 20:44:32 +01:00
Yegor Yefremov 7ed3632902 CMake: use CMAKE_CURRENT_BINARY_DIR to locate avrdude.conf
With the split CMakeLists.txt infrastructure avrdude.conf
will be created in the build/src and not build folder. Hence,
fix its location in the install command.
2022-01-31 07:18:59 +01:00
Joerg Wunsch e28e28d7c3 With the new CMake file structure, no need to dive into "src" 2022-01-30 10:46:27 +01:00
Joerg Wunsch a3868a8260 Mention PR/issue 855, 856, 857 2022-01-30 10:45:53 +01:00
Jörg Wunsch e0bc6a8bd6
Merge pull request #855 from MCUdude/fix-arduino-retry-attempts
Fix Arduino retry attempts
2022-01-30 10:45:24 +01:00
Jörg Wunsch 69177dfe3f
Merge pull request #857 from dl8dtl/fix-856
Assign proper type to msg[] in errstr()
2022-01-30 10:41:53 +01:00
Joerg Wunsch b84e6862a7 Assign proper type to msg[] in errstr()
Obviously, the array ought to be of type char.

Closes Issue #856
2022-01-29 23:32:39 +01:00
MCUdude 7144a9f2ae Replace incorrect warning message
Was mistakenly added in PR #854.
2022-01-29 20:08:43 +01:00
MCUdude 28be45d8b6 Fix Ardino sync attempts
In order for the Arduino bootloader to re-sync with Avrdude, the microcontroller needs to be reset to start the bootloader again.
2022-01-29 19:53:42 +01:00