Add %post and %preun scriptlets for handling info files.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@268 81a1dc3b-b13d-400b-aceb-764788c761c2
* doc/Makefile.am: Remove extra rules that were needed to work with
automake-1.5.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@265 81a1dc3b-b13d-400b-aceb-764788c761c2
name when checking to see if we should default to the default_serial
port instead of the default_parallel port. This has us do the right
thing for the new 'avrisp' programmer.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@262 81a1dc3b-b13d-400b-aceb-764788c761c2
command be 128 bytes. This cuts 6 seconds off the programming time
for uploading a 6K file into an AT90S8515 vs the time loading the same
file using a 16 byte buffer, and the response feedback is still good.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@261 81a1dc3b-b13d-400b-aceb-764788c761c2
all on non-paged-memory parts. The problem was that the page size was
defaulting to 256 (maximum for the stk500), but the timeout for a
response from the stk500 before declaring it dead was only 0.5
seconds. But it takes much longer than 0.5 seconds to program 256
bytes, so we just weren't waiting long enough.
Fix this in two ways - increase the timeout to 5 seconds, and decrease
the page size to 16 bytes for non-paged parts. The programming time
for 16 bytes is short enough to provide the user with some feedback
that something is happening.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@260 81a1dc3b-b13d-400b-aceb-764788c761c2
itself is paged as it doesn't appear to work otherwise.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@259 81a1dc3b-b13d-400b-aceb-764788c761c2
causes some shift-reduce conflicts, but I think they are OK.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@255 81a1dc3b-b13d-400b-aceb-764788c761c2
haven't been specified in the config file for the part.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@250 81a1dc3b-b13d-400b-aceb-764788c761c2
line so future patches are obvious as to what changed.
* avrdude.spec.in: New file to support creation of binaries in rpm format.
* configure.ac (AC_OUTPUT): Add avrdude.spec.
Reorder so that Makefile is the last entry.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@240 81a1dc3b-b13d-400b-aceb-764788c761c2
* configure.ac: If $target is a windows system, build whats in windows sub dir.
* windows/Makefile.am: New file.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@239 81a1dc3b-b13d-400b-aceb-764788c761c2
* Makefile.am (EXTRA_DIST): Rename avrdude.conf.sample to avrdude.conf.in.
Remove avrdude.conf and distclean-local rules.
Add install-exec-local and backup-avrdude-conf rules.
* avrdude.conf.in:
Set default_parallel to "@DEFAULT_PAR_PORT@" for autoconf expansion.
Set default_serial to "@DEFAULT_SER_PORT@" for autoconf expansion.
* configure.ac: Add call to AC_CANONICAL_{BUILD,HOST,TARGET} macros.
Set DEFAULT_PAR_PORT and DEFAULT_SER_PORT based on $host.
Add copyright header.
Define avrdude_version so AC_INIT and AM_INIT_AUTOMAKE are sure
to get the same version.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@238 81a1dc3b-b13d-400b-aceb-764788c761c2
$HOME/.avrduderc. Entries from .avrduderc take precedence over those
from the system wide config file in ${PREFIX}/etc/avrdude.conf.
Track and display the config file name and line number when we print
out the available parts and programmers. This is useful in case
someone has overridden a definition in their .avrduderc file and is
wondering why the definition in the system wide config file is not
being used.
Remove the default programmer 'stk500' from the distributed config
file.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@222 81a1dc3b-b13d-400b-aceb-764788c761c2
Eric Weddington
Theodore A. Roth
Joerg Wunsch
Brian S. Dean