Commit Graph

64 Commits

Author SHA1 Message Date
Joerg Wunsch 768a8fc8bc bug #34027: avrdude AT90S1200 Problem (part 2 - stk500v2 and relatives)
* stk500v2.c (stk500v2_initialize): For the AT90S1200, release
/RESET for a moment before reinitializing, as this is required by
its programming protocol.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1004 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-30 07:19:21 +00:00
Joerg Wunsch 86432b91d9 Submitted by Brett Hagman:
Add support for the "Wiring" board/bootloader
* wiring.c: New file.
* wiring.h: (Ditto.)
* Makefile.am: Add new files.
* stk500v2_private.h: Reorganize so some functions and struct
pdata are globally known.
* stk500v2.c: (Ditto.)
* stk500v2.h: (Ditto.)
* lexer.l: Add new programmer keywords.
* config_gram.y: (Ditto.)
* avrdude.conf.in: Add "wiring" programmer entry.
* avrdude.1: Document the new programmer.
* doc/avrdude.texi: (Ditto.)
* AUTHORS: Add Brett Hagman.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@987 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 20:22:09 +00:00
Joerg Wunsch 1f8dc4dc52 bug #33114: Segfault after setting the DWEN fuse with Dragon
* jtagII.c (jtagmkII_getsync): Instead of exit()ing from
deep within the tree when detecting the "need debugWIRE"
situation, properly pass this up as a return code.
* jtagII_private.h (JTAGII_GETSYNC_FAIL_GRACEFUL): New constant.
* stk500v2.c (stk500v2_jtagmkII_open): Don't tell anything
anymore when receiving a JTAGII_GETSYNC_FAIL_GRACEFUL from
jtagmkII_getsync(); silently give up (all necessary has been
said already).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@983 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 10:05:09 +00:00
Joerg Wunsch 8bb408b0ab bug #29636: AVRDude issues invalid CMD_CHECK_TARGET_CONNECTION
on the AVRISP-MKII
* stk500v2.c (stk500v2_program_enable): Rewrite the logic to
explain ISP activation failures.
* stk500v2_private.h: Fix the various STATUS_* constants;
AVR069 and AVR079 disagreed in their values, even though they
are apparently implementing the same logic behind.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@972 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-16 18:15:19 +00:00
Joerg Wunsch d02285b47e In stk500v2_command(), detect warning status codes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@951 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-12-14 17:17:33 +00:00
Nils Springob 0c603e4791 * serial_open() calls will now return -1 on error (no call to exit())
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@948 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-10-22 14:29:56 +00:00
Joerg Wunsch f1bf228061 bug #30566: MinGW + Ubuntu 9.04
* stk500v2.c (stk500v2_open): use same condition to refer to the AVR
Doper support as used in the definition in ser_avrdoper.c.
(Thanks to Christian Starkjohann for the analysis of the problem.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@947 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-07-27 16:06:01 +00:00
Joerg Wunsch 77e0502890 Implement TPI mode for AVRISPmkII/STK600.
Add ATtiny4/5/9/10 to avrdude.conf.in.
Document TPI and new device support.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@916 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-15 16:36:13 +00:00
Joerg Wunsch 4b03544ff0 Update STK600 routing and socket card data from XML
file.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@911 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 12:52:38 +00:00
Joerg Wunsch a50fb8f9e6 Cleanup the open/close handling to avoid accessing
unallocated memory (in the atexit handler) in case of bailing out.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@910 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 12:44:54 +00:00
Joerg Wunsch 7f6c42846c Various fixes for Xmega devices.
* avrdude.conf.in: Correctly declare EEPROM page sizes for
all Xmega devices (0x20 instead of 0x100).
* avr.c: If a memory region has a page size declared, try
using the paged IO routines regardless of the target memory
name.  Xmega EEPROM requires to be written in paged mode.
Correctly use a long (rather than unsigned long) variable to
evaluate the success status of the paged mode write attempt.
* stk500v2.c: Don't apply TIF space offsets twice (bug #27995:
AVRDUDE 5.8svn fails to program and read XMEGA); use
stk500v2_loadaddr() prior to paged mode (EEPROM and flash) writes,
otherwise programming of flash areas will fail; while being there,
check the return value of stk500v2_loadaddr() everywhere; use the
correct write/erase mode bits (same as AVR Studio does).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@907 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-12 15:42:40 +00:00
Joerg Wunsch bb7c8a299a bug #28516: Linux/Dragon: Error message on exit
* stk500v2.c: Fix the "bad response to GO command:
RSP_ILLEGAL_EMULATOR_MODE" message.  jtagmkII_close()
has been called with the wrong pgm->cookie.  Wrap it
inside stk500v2_jtagmkII_close(), adjusting the cookie
data appropriately.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@895 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-08 16:01:37 +00:00
Joerg Wunsch ee8a473945 bug #27507: SIGSEGV when using avrdragon (avrdude 5.8)
* stk500v2.c (stk500v2_dragon_isp_initpgm): Use
stk500v2_jtagmkII_setup/stk500v2_jtagmkII_rather than their
jtagII counterparts, to get the private data properly
initialized.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@887 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-07 15:53:50 +00:00
David Hoerl d1f4417c99 Cast in fprintf to remove warning on possible size mismatch
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@860 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 22:10:58 +00:00
Joerg Wunsch 0b871f2b6e * jtagmkI.c (jtagmkI_send): Replace %zd format by %u since not all
implementations do understand the C99 formatting options (sigh).
* jtagmkII.c (jtagmkII_send): (Ditto.)
* stk500v2.c (stk500v2_recv): (Ditto.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@836 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-10 22:39:37 +00:00
Joerg Wunsch 202d98a7f8 Fix a serious memory corruption problem resulting
out of the chaining of both, the stk500v2 and the jtagmkII
programmers for some programming hardware (JTAG ICE mkII and AVR
Dragon running in ISP, HVSP or PP mode), where both programmers
have to maintain their private programmer data.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@834 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-06 22:10:20 +00:00
Joerg Wunsch 9c1f1f921b Handle writing fuse bytes (on the Xmega).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@820 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-06-24 21:18:36 +00:00
Joerg Wunsch 94fb9d11f2 Submitted by Mikael Hermansson:
* avrdude.conf.in (ATxmega256A3): new device.
* stk500v2 (stk500v2_initialize): Enable the AVRISPmkII as a
PDI-capable device for ATxmega parts.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@809 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-26 19:43:55 +00:00
Joerg Wunsch 192c022057 Turn all non-const static data into instance data.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@807 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-25 09:20:38 +00:00
Joerg Wunsch 8b35dc3620 More fixes for Solaris, including fixes for the Sunpro compiler:
* avr.h: Remove stray semicolon.
* configure.ac: Add check for predefined types uint_t and ulong_t.
* confwin.c: Include "avrdude.h" on top to avoid empty translation
unit warning.
* ppwin.c: (Ditto.)
* ser_win32.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* jtagmkII.c (jtagmkII_recv): remove unreachable "return".
* stk500.c (stk500_initialize): (Ditto.)
* par.c: Test for both, __sun__ and __sun to see whether we are
being compiled on Solaris.
* ppi.c: (Ditto.)
* stk500v2.c: Implement the DEBUG and DEBUGRECV macros in a way
that is compatible with the ISO C99 standard.
* usbtiny.c: Only typedef uint_t and ulong_t if they have not
been found already by the autoconf checks.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@804 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-23 22:04:57 +00:00
Joerg Wunsch 5813809496 bug #22882: Erase Cycle Counter does not work for stk500v2
* stk500v2.c (stk500v2_chip_erase,stk500hv_chip_erase): Return
the expected 0 for success rather than a protocol-dependant
number.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@785 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-04 13:15:21 +00:00
Joerg Wunsch 21d6738cc8 Fix a serious memory corruption that happened when using the JTAG ICE
mkII (or AVR Dragon) in ISP mode.  The wrong set of per-programmer
private data had been allocated (stk500v2 vs. jtagmkII) which was too
small to hold the actual data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@781 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:26:06 +00:00
Joerg Wunsch 7f29eb67ea * stk500v2.c (stk600_xprog_paged_write): Fix a fatal miscalculation
of the number of bytes to be written which caused a malloc chunk
corruption.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@778 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-29 08:39:15 +00:00
Joerg Wunsch 5d0bfcaf4c First implementation of ATxmega support. By now, only the
PDI mode of the STK600 is supported.  Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 22:53:40 +00:00
Joerg Wunsch ec2df64017 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
Joerg Wunsch 255f873185 stk500v2_recv(): Make length computation unsigned so
it cannot accidentally become negative.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@767 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-01-26 08:01:51 +00:00
Joerg Wunsch 58a3d35757 main.c, pgm.c, pgm.h: Add setup and teardown hooks to the programmer
definition.  If present, call the setup hook immediately after finding
the respective programmer object, and schedule the teardown hook to be
called upon exit.  This allows the programmer implementation to
dynamically allocate private programmer data.

avr910.c, butterfly.c, jtagmkI.c, jtagmkII.c, stk500v2.c, usbasp.c,
usbtiny.c: Convert static programmer data into dynamically allocated
data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@764 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-07 20:36:12 +00:00
Joerg Wunsch b8a306c048 safemode.c: Obtain progname from avrdude.h rather than trying to roll our
own (duplicate) copy of it.

other files: Constify char pointers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@725 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-30 13:41:54 +00:00
Joerg Wunsch 5bf9e2d9f2 Major code cleanup.
- Make all internal functions "static".
- Make sure each module's header and implementation file match.
- Remove all library-like functionality from main.c, so only
  the actual frontend remains in main.c.
- Add C++ brackets to all header files.

That effectively leaves the various module C files as something like
an "avrdude library", with main.c being the currently only frontend
program for that library.  In theory, it should be possible to write
different frontends using the same library backend functions though.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@722 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 22:43:46 +00:00
Joerg Wunsch 27e16e8371 Something I always wanted to do: replace all those private "extern"
declarations in each file by a central header file "avrdude.h".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 21:07:54 +00:00
Joerg Wunsch 6524723327 Submitted by Christian Starkjohann:
patch #5507: Support for AVR-Doper USB programmer in HID mode

* configure.ac: Add hooks to detect the Win32 HID library,
as well as the existence of <ddk/hidsdi.h>.
* Makefile.am: Add new files.
* my_ddk_hidsdi.h: (New file.)
* ser_avrdoper.c: (New file.)
* serial.h: Add declaration for avrdoper_serdev.
* stk500v2.c: Add hook to divert to the AVR Doper code.
* avrdude.1: Document the AVR Doper support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@704 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-20 23:43:34 +00:00
Joerg Wunsch 15635697c8 Sigh, fix yet another printf() format warning (on 64-bit architectures).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@700 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 15:33:19 +00:00
Joerg Wunsch 7e20e7571f Make the code compile warning-free:
- declare a dummy "struct timezone" for some Win32 systems (MinGW)
- fix a few printf() argument types
- get rid off the prevailing "all filedescriptors are of type int"
  attitude

The last item required a large sweep across the code, in order to
replace all "int fd"s by "struct filedescriptor *fd"s, and pass
pointers (as we cannot pass a union directly).  In return, the
code is now supposed to be fully 64-bit safe, rather than relying
on a 64-bit pointer being converted to a (32-bit) int and back
to a pointer as we did previously.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@694 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 12:47:35 +00:00
Joerg Wunsch afb13a9936 Replace the fallback of avr_read_byte() and avr_write_byte() to
avr_read_byte_default() and avr_write_byte_default (resp.) by directly
calling the latter functions from within all programmers that don't
implement their own read_byte()/write_byte() methods.  In turn, make the
read_byte() and write_byte() methods mandatory, and the cmd() method
(direct ISP command) optional instead (it's effectively mandatory for
any programmer using avr_read_byte_default()/avr_write_byte_default()
though).  Remove all the pointless cmd() method stubs from those programmers
that don't need it.

Eliminate avr_read_byte() as it was now completely identical to
pgm->read_byte().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@684 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 15:04:09 +00:00
Joerg Wunsch 31f93ccb59 Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
Joerg Wunsch 90d6100d88 Add support for the AVR Dragon (JTAG and ISP mode).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@675 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-26 21:14:10 +00:00
Joerg Wunsch 2cfccda03d Submitted by John Voltz: add AVR053 oscillator calibration.
* main.c: Add the -O option.
* pgm.c: Add the hook for the perform_osccal() method.
* pgm.h: (Ditto.)
* stk500v2.c: Implement perform_osccal().
* avrdude.1: Document the -O option.
* doc/avrdude.texi: (Ditto.)
Partially closes bug #17487: AVR RC oscillator calibration
routine not supported (feature request)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@671 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-09 14:34:24 +00:00
Joerg Wunsch b118ea42ca Hide two debug/trace statements behind "verbose".
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@653 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-08 21:10:05 +00:00
Joerg Wunsch ffc20c8df7 In stk500v2_jtagmkII_open(), when the ICE synchronization failed,
still call the close method so we sign off correctly from the ICE:


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@646 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 22:33:59 +00:00
Joerg Wunsch 044536a3f2 Fix the maxsize comparision in stk500v2_jtagmkII_recv(), it was off
by one.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@644 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 22:29:27 +00:00
Joerg Wunsch 995bd68034 Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
Joerg Wunsch 7846e5b1fa Some more STK500 vs. AVRISP cleanup: don't announce STK500-only
parameters on AVRISPs.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@615 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-19 21:02:45 +00:00
Joerg Wunsch e4bf6e16e4 Minor cosmetic changes: STK500 firmware version numbers are M.NN, so
always display the minor number as two digits.  Examine the response
to the sign-on command to see which programmer hardware we are talking
to, and then restrict the STK500 topcard display to devices detected
as STK500.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@614 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-18 21:23:34 +00:00
Joerg Wunsch 5091836671 Unreverse the argument order for CMD_CHIP_ERASE_HVSP; Atmel says
AVR068 is right, and stk500.exe is wrong.  (This reverts rev 1.19)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@611 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-17 16:01:34 +00:00
Joerg Wunsch a1e7b43de4 Submitted by <eolson@mit.edu>:
* stk500v2.c (stk500v2_open): patch #5273: Emit error message
if user requests usb and no libusb support


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@608 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-14 21:30:04 +00:00
Joerg Wunsch 3bea5f30ee Reverse the argument order for
CMD_CHIP_ERASE_HVSP; AVR068 and stk500.exe differ here.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@600 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-10 15:41:19 +00:00
Joerg Wunsch c9bd1ad7ec stk500v2_program_enable(): Fix a typo (synchloops vs. synchcycles).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@598 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-09 19:56:48 +00:00
Joerg Wunsch dbf083fb4d Implement STK500 (v2) HVSP mode.
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-21 21:53:49 +00:00
Joerg Wunsch e8a63e5174 Add more parameters for PP mode.
Fix the non-paged write operations for old AVRs.

In avrdude.conf.in, use the new PP mode parameters; add PP mode
definitions for AT90S8515.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@591 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-19 21:25:08 +00:00
Joerg Wunsch d28d6853b2 Hide stk500v2_set_sck_period_mk2() behind an #if defined(HAVE_LIBUSB)
as it is only used there (for the AVRISP mkII).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@590 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-19 21:19:42 +00:00