Commit Graph

84 Commits

Author SHA1 Message Date
dhoerl 92b8065a02 Added AVR32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@905 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-11 16:17:46 +00:00
joerg_wunsch 05bf2b8042 Mention the Arduino support that has been added recently.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@899 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-08 20:05:39 +00:00
mludvig 2dbc1647ad * buspirate.c: Replace GNU-only %as with %s in sscanf call.
* ser_win32.c(ser_set_dtr_rts): Fixed typo in parameter name.
	* NEWS: Announce BusPirate.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@865 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-12 06:51:53 +00:00
joerg_wunsch 5b51a2fdcb usbdev_close(): Repair the logic around the
conditional compilation of usb_reset() introduced in r798.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@841 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-08-17 04:15:08 +00:00
joerg_wunsch 58f7e0f2ab AVRDUDE 5.8 is done now.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@840 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-10 23:06:04 +00:00
joerg_wunsch 0d527175b0 AVRDUDE 5.8 is around the corner.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@838 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-10 22:52:02 +00:00
joerg_wunsch fb7a640d75 Post-release 5.7.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@833 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-02 12:01:21 +00:00
joerg_wunsch 4f8176e67f Prepare for releasing version 5.7.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@831 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-02 11:44:26 +00:00
joerg_wunsch 735371e9ba bug #26412: avrdude segfaults when called with a programmer that does not
support it

Do not call pgm->perform_osccal() unless it is != 0.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@822 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-01 16:08:49 +00:00
joerg_wunsch 366db1ab6e Contributed by Zoltan Laday:
patch #6825: xmega problems with JTAGICEmkII
* jtagmkII.c: Many fixes for Xmega devices.
* jtagmkII_private.h: Add various new constants required for
Xmega devices.
* avrdude.conf.in: New devices: ATXMEGA64A1, ATXMEGA192A1,
ATXMEGA256A1, ATXMEGA64A3, ATXMEGA128A3, ATXMEGA192A3,
ATXMEGA256A3, ATXMEGA256A3B, ATXMEGA16A4, ATXMEGA32A4,
ATXMEGA64A4, ATXMEGA128A4
* avr.c (avr_read, avr_write): Add more names for (Xmega)
memory areas that require paged operation.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@821 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-06-24 21:32:12 +00:00
joerg_wunsch 8d5144558b AVRDUDE 5.6 is history now.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@813 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-27 10:34:24 +00:00
joerg_wunsch 7588085eee Prepare for releasing version 5.6.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@811 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-27 10:31:33 +00:00
joerg_wunsch e248e5fab8 Submitted by Mikael Hermansson:
* avrdude.conf.in (ATxmega256A3): new device.
* stk500v2 (stk500v2_initialize): Enable the AVRISPmkII as a
PDI-capable device for ATxmega parts.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@809 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-26 19:43:55 +00:00
joerg_wunsch e41d85664d Submitted by Lars Immisch:
patch #6750: Arduino support - new programmer-id
* arduino.c: New file, inherits stk500.c.
* arduino.h: New file.
* Makefile.am: Add arduino.c and arduino.h.
* config_gram.y: Add arduino keyword.
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)
* avrdude.1: Document the new programmer type.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@808 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-25 09:39:04 +00:00
joerg_wunsch d694c1ff5d Add support for the ATmega1284P.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@805 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-25 07:51:04 +00:00
joerg_wunsch 3815878ed1 Submitted by Andrew O. Shadoura:
bug #25156: add direct SPI transfer mode
* bitbang.c: Implement direct SPI transfers.
* bitbang.h: (Ditto.)
* par.c: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* term.c: Add the "spi" and "pgm" commands.
* avrdude.1: Document the changes.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@797 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 15:31:27 +00:00
joerg_wunsch 82ae3b3eda Submitted by Limor ("Lady Ada"):
bug #24749: add support for '328p
* avrdude.conf.in (ATmega328P): new device support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@796 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 14:17:53 +00:00
joerg_wunsch c4e691500c Submitted by "Womo":
bug #25241: AT90USB162, AT90USB82 device support patch for avrdude-5.5
(also: bug #21745: AT90USBxx2 support)
* avrdude.conf.in (AT90USB162, AT90USB82): new device support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@795 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 13:45:07 +00:00
joerg_wunsch 5dcd1c8d8f Submitted by Evangelos Arkalis:
patch #6069: Atmel AT89ISP Cable
* avrdude.conf.in (89isp): new programmer support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@794 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 12:43:05 +00:00
joerg_wunsch e7618c8372 Submitted by Bob Paddock:
patch #6748: ATTiny88 Config
* avrdude.conf.in (ATtiny88): new device support.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@793 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 13:28:55 +00:00
joerg_wunsch 6850642ff6 Submitted by Mark Litwack:
patch #6261: avrdude won't use dragon/debugwire to write a file
to eeprom
* jtagmkII.c (jtagmkII_paged_write): when in debugWire mode,
implement a paged write to EEPROM as a series of byte writes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@792 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 12:26:44 +00:00
joerg_wunsch b92116d17a Submitted by Janos Sallai:
patch #6542: paged_load fails on the MIB510 programming board
* stk500.c: Add a workaround for the different signon sequence on
MIB510 programmers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@791 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 10:19:46 +00:00
joerg_wunsch 50ef8a71b3 This change actually dates back to July 29: add preliminary support
for Xmega programming using the JTAG ICE mkII in JTAG mode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@780 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:16:46 +00:00
joerg_wunsch a37bbfab57 * main.c: Remember whether the device initialization worked, and
allow to continue with -F if it failed yet do not attempt to
perform anything on the device itself.  That way, -tF could be
specified for programmers like the STK500/STK600 even without a
device connected, just in order to allow changing parameters on
the programmer itself.
* avrdude.1: Document that possible use of the -F option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@779 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-29 21:26:55 +00:00
joerg_wunsch 15fc8af421 First implementation of ATxmega support. By now, only the
PDI mode of the STK600 is supported.  Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 22:53:40 +00:00
joerg_wunsch 361943769e Contributed by Ville Voipio:
patch #6501: New autotools support for avrdude
* Makefile.am: add @WINDOWS_DIRS@ to SUBDIR
* bootstrap: allow for autconf-2.61 and automake-1.10, too
* configure.ac: fix @WINDOWS_DIRS@ recursion, replace
AC_PROG_CC by AM_PROG_CC_C_O, for esoteric reasons


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@774 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-25 21:06:55 +00:00
joerg_wunsch 7f910d3be0 Contributed by Janos Sallai <janos.sallai@vanderbilt.edu>:
patch #6074: added support for crossbow's MIB510 programmer
* avrdude.conf.in: Add entry for mib510.
* stk500.c: Add special hooks to handle the MIB510 programmer.
It mostly talks STK500v1 protocol but has a special hello and
goodbye sequence, and uses a fixed block size of 256 bytes.
* doc/avrdude.texi: Document support for mib510.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@773 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-06-13 21:19:46 +00:00
joerg_wunsch da0f0105bb Add support for the -x devcode option, and document it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@769 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-24 21:22:04 +00:00
joerg_wunsch 8b391a8150 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
joerg_wunsch 0c8bd41a10 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
joerg_wunsch 6a54d14f43 We are post 5.5 now.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@760 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 23:08:37 +00:00
joerg_wunsch 3d024b2a67 Prepare for releasing avrdude 5.5.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@758 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 23:00:12 +00:00
joerg_wunsch 3a69fb7f64 Submitted by Wolfgang Moser:
patch #6121: ISP support for the C2N232I device (serial port
bitbanging)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@755 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 22:37:38 +00:00
joerg_wunsch 967f380da4 The next release will have bug fixes...
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@751 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 21:27:46 +00:00
joerg_wunsch eb27298b5d Submitted by <ladyada@gmail.com>:
Patch #6233: Add support for USBtinyISP programmer
* usbtiny.c: New file.
* usbtiny.h: (Ditto.)
* Makefile.am: Include usbtiny into the build.
* avrdude.conf.in: (Ditto.)
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the usbtiny support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@749 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 18:03:02 +00:00
joerg_wunsch 898ba4bb79 We are post-release.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@744 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-05-16 21:54:21 +00:00
joerg_wunsch fd7f906990 More release preparation.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@742 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-05-16 21:46:30 +00:00
joerg_wunsch 9b19452848 Add entries for AT90PWM2/3B.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@730 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-02-26 19:52:53 +00:00
joerg_wunsch 06235497a7 Implement ATmega256x support for butterfly/avr109.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@727 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-30 15:47:53 +00:00
joerg_wunsch 3f8e4dfe8c Rearrange everything so it is now built into a libavrdude.a library,
and link main.c against that library.

Add AC_PROG_RANLIB to configure.ac as we are building a library now.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@723 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-25 20:51:11 +00:00
joerg_wunsch 2c6b2309d5 ATmega8: Bump the delay values for flash
and EEPROM, based on the current Atmel XML file.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@720 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-13 22:57:14 +00:00
joerg_wunsch 159be5f675 We are post-release (again).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@715 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-22 23:21:53 +00:00
joerg_wunsch 1ad3f961f1 * configure.ac (AC_INIT): Bump version to 5.3.1.
* avrdude.conf.in (frank-stk200): Fix syntax error.
* ser_avrdoper.c: Make #ifdef for Win32/libhid
consistent with the initial check: use the HID driver
only iff found, otherwise use libusb.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@712 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-22 22:52:34 +00:00
joerg_wunsch 857c1ba558 We are now post release 5.3.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@711 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-21 22:48:14 +00:00
joerg_wunsch 2fc6741f06 Cosmetic: mention the current changes are now for 5.3.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@709 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-21 22:40:06 +00:00
joerg_wunsch 26e8bc656a Submitted by Christian Starkjohann:
patch #5507: Support for AVR-Doper USB programmer in HID mode

* configure.ac: Add hooks to detect the Win32 HID library,
as well as the existence of <ddk/hidsdi.h>.
* Makefile.am: Add new files.
* my_ddk_hidsdi.h: (New file.)
* ser_avrdoper.c: (New file.)
* serial.h: Add declaration for avrdoper_serdev.
* stk500v2.c: Add hook to divert to the AVR Doper code.
* avrdude.1: Document the AVR Doper support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@704 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-20 23:43:34 +00:00
joerg_wunsch 098a6c6bea Mention our debugWire support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@689 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-21 11:19:10 +00:00
joerg_wunsch 8f24c5b181 Fix the width of the efuse memory area for a number of AVRs.
Closes bug #18182: Wrong setting of eFuse configuration for
mega640/1280/1281/2560/2561 in avrdude 5.2


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@678 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-02 21:02:41 +00:00
joerg_wunsch c35b4481dc Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
joerg_wunsch 0e4819c0e7 Implement a flags field in struct serdev, and populate it with a flag
that indicates whether the underlying communication can dynamically
change its speed or not.  This flag is set for true serial
communication but clear for USB communication.  Don't try to adjust
the speed when talking over a communication channel that doesn't
support it.  (The Dragon does not even support the respective
parameter.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@676 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-27 08:45:47 +00:00