* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix the non-paged write operations for old AVRs.
In avrdude.conf.in, use the new PP mode parameters; add PP mode
definitions for AT90S8515.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@591 81a1dc3b-b13d-400b-aceb-764788c761c2
as it is only used there (for the AVRISP mkII).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@590 81a1dc3b-b13d-400b-aceb-764788c761c2
Eliminate pagebuf, and use stack-allocated buffers instead. The
pagesize of all current AVRs is at most 256 only anyway, and this is
unlikely to change with the STK500v2 protocol. The previous pagebuf
implementation suffered from some possible buffer overrun.
In stk500pp_write_page(), do always write full pages, rather than
attempting to write a partial last page which did not get written at
all. Fill the remaining bytes with 0xff.
For (paged) write operations, correctly synthesize the mode byte.
This mode byte is very different from the ISP mode byte (sigh).
In stk500pp_read_byte(), when performing read operations on paged
memory, start reading at the previous page boundary rather than the
current address.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@589 81a1dc3b-b13d-400b-aceb-764788c761c2
give the full name of the respective memory area, instead of
the (possibly abbreviated) name the user typed in the -U option.
(Previous attempt in rev 1.110 was obviously not complete.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@588 81a1dc3b-b13d-400b-aceb-764788c761c2
Document ATmega256x support. Also document Solaris port defaults
in avrdude.texi.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@584 81a1dc3b-b13d-400b-aceb-764788c761c2
jtag2 and bitbang programmers are working, stk500v2
still needs to be done.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@581 81a1dc3b-b13d-400b-aceb-764788c761c2
Add the "atisp" programmer entry that makes use of negated signals.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@578 81a1dc3b-b13d-400b-aceb-764788c761c2
The 64 KB devices are actually guessed, as the datasheet and XML
files obviously contain a number of errors there.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@576 81a1dc3b-b13d-400b-aceb-764788c761c2
Contributed by Wim Lewis, add support for checking device
signatures in detail (patch #4924 and #4925)
* avrdude.conf.in: Add signatures
* avrpart.c: Set default signature
* avrpart.h: Variable for signature
* config_gram.y: More signature reading
* lexer.l: Define that signatures exist
* main.c: Read signatures and check them against hardware
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@573 81a1dc3b-b13d-400b-aceb-764788c761c2
Which stops sck from being writtend needlessly
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@568 81a1dc3b-b13d-400b-aceb-764788c761c2
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
ATmega48/88/168; the datasheet is a bit off here as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@560 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4459: Fix for rpm package builds
* avrdude.spec.in: update the RPM spec file:
- Default to enable-doc=yes during configure.
- Move info file to docs package.
- Make building of docs package conditional. Basic
idea copied from avr-gcc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@558 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix bug #15013: Wrong use of PPICLAIM (kernel: ppdev0: claim the
port first)
* par.c: don't claim/release here (thus win_ppdev.h not needed
anymore)
* ppi.c: claim/release here.
* freebsd_ppi.h: ppi_claim/ppi_release now take an fd as parameter.
* solaris_ecpp.h: (Ditto.)
* linux_ppdev.h: (Ditto.) (Also add copyright.)
* win_ppdev.h: Not needed anymore, remove.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@557 81a1dc3b-b13d-400b-aceb-764788c761c2
Beautify Colin's recent entries while being here.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@551 81a1dc3b-b13d-400b-aceb-764788c761c2
*par.c: ppi_claim and ppi_release definitions now in a Windows header file
*ppi.c: Only included if you are building for Windows
*win_ppdev.h: Initial Commit, see par.c
CV: ----------------------------------------------------------------------
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@549 81a1dc3b-b13d-400b-aceb-764788c761c2
The very basic functionality (paged flash read/write, erase, terminal
mode reads, fuse writes) works fine. There are still the following
issues right now:
. paged EEPROM write (i.e. through -U eeprom:w:...) only works on an
erased EEPROM
. byte-access flash and EEPROM writes (i.e. in terminal mode) fail
. documentation needs to be updated still
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@547 81a1dc3b-b13d-400b-aceb-764788c761c2
Joerg Wunsch
Colin O Flynn