This change was made for the shared library, since library functions
should not write to std-streams directly. Instead avrdude_message()
has to be implemented by the library user. For the avrdude application
this function is implemented in main.c.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1305 81a1dc3b-b13d-400b-aceb-764788c761c2
* linuxgpio.c, bitbang.c, buspirate.c, par.c, pgm.h, term.c, serbb_*.c: changed
interface of setpin, getpin, highpulsepin to take pin function as parameter
(not the real number, which can be found by pgm->pinno[function])
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1252 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrftdi.c,buspirate.c,linuxgpio.c,par.c,serbb_*.c: added function call
to fill old pinno entries from new pin definitions.
* pindefs.[hc]: added data struct and helper functions for new pin definitions
* avrdude.conf.in: pins in entries using ftdi_syncbb are now 0-based
* config_gram.y: allow combinations of inverted and non-inverted pins in pin lists
* ft245r.c: reworked to work directly with the new pin definitions,
pins are now 0-based, inverse pins are supported, buff is supported
* pgm.[ch]: added new pin definitions field to programmer structure,
adapted pin display functions
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1160 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #37727 Add support for LM3S811 dev board as a programmer
* lexer.l,config_gram.y: accepting inverted pins at pin lists
syntax: ~num or ~(num,num,...)
* par.c: par_set_many_bits is now usable with inverted pins
* avrftdi.c: fixed wrong index in ftdi_pin_name
* avrdude.conf.in: added programmer lm3s811
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1106 81a1dc3b-b13d-400b-aceb-764788c761c2
* ft245r.[ch]: new programmer type implementation
* configure.ac: add pthread as link library
* avrdude.conf.in: added some new programmers
* Makefile.am: added new source files to compile
* pindefs.h: change PIN_MASK, PIN_INVERSE to highest bit of unsigned int
* pgm.[ch]: added generic function to print pin assignments (taken from par.c)
* par.c: moved pin assigment print function to pgm.c
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1055 81a1dc3b-b13d-400b-aceb-764788c761c2
will update only the table in pgm_type.c.
* config_gram.y, lexer.l: removed programmer type keywords,
use now locate_programmer_type() function
* pgm_type.[ch]: added new files for table of programmer types
* main.c: allow list of programmer types by -c ?type
* avrdude.conf.in: changed all type keywords to quoted strings
* doc/avrdude.texi: changed description of type definition, list
of valid types is now included from generated file
* doc/Makefile.am: generate list of programmer types for doc
* all programmers [hc]: add xxx_desc string for description of programmer
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1051 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #22720: avrdude-5.5 ignores buff settings in avrdude.conf
(Note that the actual bug the subject is about has been fixed
long ago.)
* update.c (do_op): fix a diagnostic message
* pgm.h: add exit_datahigh field
* par.c: set and act upon the exit_datahigh field
* avrdude.1: document the new -E options
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@985 81a1dc3b-b13d-400b-aceb-764788c761c2
* par.c (par_close): use par_setmany() rather than par_setpin()
for PPI_AVR_BUFF.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@888 81a1dc3b-b13d-400b-aceb-764788c761c2
* avr.h: Remove stray semicolon.
* configure.ac: Add check for predefined types uint_t and ulong_t.
* confwin.c: Include "avrdude.h" on top to avoid empty translation
unit warning.
* ppwin.c: (Ditto.)
* ser_win32.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* jtagmkII.c (jtagmkII_recv): remove unreachable "return".
* stk500.c (stk500_initialize): (Ditto.)
* par.c: Test for both, __sun__ and __sun to see whether we are
being compiled on Solaris.
* ppi.c: (Ditto.)
* stk500v2.c: Implement the DEBUG and DEBUGRECV macros in a way
that is compatible with the ISO C99 standard.
* usbtiny.c: Only typedef uint_t and ulong_t if they have not
been found already by the autoconf checks.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@804 81a1dc3b-b13d-400b-aceb-764788c761c2
own (duplicate) copy of it.
other files: Constify char pointers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@725 81a1dc3b-b13d-400b-aceb-764788c761c2
declarations in each file by a central header file "avrdude.h".
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
- declare a dummy "struct timezone" for some Win32 systems (MinGW)
- fix a few printf() argument types
- get rid off the prevailing "all filedescriptors are of type int"
attitude
The last item required a large sweep across the code, in order to
replace all "int fd"s by "struct filedescriptor *fd"s, and pass
pointers (as we cannot pass a union directly). In return, the
code is now supposed to be fully 64-bit safe, rather than relying
on a 64-bit pointer being converted to a (32-bit) int and back
to a pointer as we did previously.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@694 81a1dc3b-b13d-400b-aceb-764788c761c2
avr_read_byte_default() and avr_write_byte_default (resp.) by directly
calling the latter functions from within all programmers that don't
implement their own read_byte()/write_byte() methods. In turn, make the
read_byte() and write_byte() methods mandatory, and the cmd() method
(direct ISP command) optional instead (it's effectively mandatory for
any programmer using avr_read_byte_default()/avr_write_byte_default()
though). Remove all the pointless cmd() method stubs from those programmers
that don't need it.
Eliminate avr_read_byte() as it was now completely identical to
pgm->read_byte().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@684 81a1dc3b-b13d-400b-aceb-764788c761c2
possible to extend them for other programmers than PPI now (serbb,
stk500*).
* pgm.h: Keep the exit specs in an abstract form inside struct
programmer_t. (Should be moved out into some programmer-specific
structure.) Rename the getexitspecs() method into
parseexitspecs().
* main.c: Move the exit specs stuff out to the programmer
implementation.
* par.c: Implement the new exit spec handling. Everything is now
done using the generic abstraction layer.
Closes bug #16443: No disable Resetsignal at the end of
Programming Session
Obviates need for patch #5057: quick and dirty Hack to unset Reset
after Programming
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@629 81a1dc3b-b13d-400b-aceb-764788c761c2
via the patch tracking system.
patch #5096: Allow VCC and BUFF to be any pin in parallel mode
* config_gram.y: Release the restriction to PPIDATA pins.
* par.c: Rework the code to introduce a function par_setmany()
that builds on top of par_setpin(), and use that function for the
PPI_AVR_VCC and PPI_AVR_BUFF pin collections. This also abstracts
the polarity of these signals appropriately.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@628 81a1dc3b-b13d-400b-aceb-764788c761c2
main() into their own bitbang_check_prerequisites().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@626 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4539: Ability to control the bit clock (usleep) delay
for ppi interface
* bitbang.c: Implement bitbang_delay() and its calibration.
* bitbang.h: Declare bitbang_delay().
* main.c: Add the ispdelay option (-i).
* pgm.h (struct programmer_t): Add the ispdelay parameter.
* par.c: Add calls to bitbang_delay() when requested.
* serbb_posix.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* avrdude.1: Document the new -i option.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@610 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix bug #15013: Wrong use of PPICLAIM (kernel: ppdev0: claim the
port first)
* par.c: don't claim/release here (thus win_ppdev.h not needed
anymore)
* ppi.c: claim/release here.
* freebsd_ppi.h: ppi_claim/ppi_release now take an fd as parameter.
* solaris_ecpp.h: (Ditto.)
* linux_ppdev.h: (Ditto.) (Also add copyright.)
* win_ppdev.h: Not needed anymore, remove.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@557 81a1dc3b-b13d-400b-aceb-764788c761c2
*par.c: ppi_claim and ppi_release definitions now in a Windows header file
*ppi.c: Only included if you are building for Windows
*win_ppdev.h: Initial Commit, see par.c
CV: ----------------------------------------------------------------------
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@549 81a1dc3b-b13d-400b-aceb-764788c761c2
* Makefile.am: distclean avrdude.conf.
* avrdude.conf.in: make the parallel-port programmers optional.
* bitbang.c: move the bitbang features out into PROGRAMMER.
* configure.ac: introduce --enable-parport, add Solaris.
* lexer.l: replace str by strng to work around problems in some
versions of flex.
* main.c: move getexitspecs into the respective programmer's
domain; replace rindex by the C-standard strrchr.
* par.c: make parallel port optional.
* par.h: everything but par_initpgm() is private now.
* pgm.h: add setping/getping/highpulsepin/getexitspecs.
* serbb_posix.c: generalize bitbang interface; replace
cfmakeraw() by explicit code.
* serbb_win32.c: generalize bitbang interface.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@539 81a1dc3b-b13d-400b-aceb-764788c761c2
will be available in the upcoming avrdude release.
His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
This change should increase immunity to delays in the
programmer-hardware.
Also did some unrelated cleanup in par_txrx().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@408 81a1dc3b-b13d-400b-aceb-764788c761c2
Move save/restore-functionality into open/close.
* par.c: open/close now saves/restores PPICTRL, too.
* TODO: exitspecs don't work if RESET is in PPICTRL.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@407 81a1dc3b-b13d-400b-aceb-764788c761c2
$HOME/.avrduderc. Entries from .avrduderc take precedence over those
from the system wide config file in ${PREFIX}/etc/avrdude.conf.
Track and display the config file name and line number when we print
out the available parts and programmers. This is useful in case
someone has overridden a definition in their .avrduderc file and is
wondering why the definition in the system wide config file is not
being used.
Remove the default programmer 'stk500' from the distributed config
file.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@222 81a1dc3b-b13d-400b-aceb-764788c761c2
programming mode. Use 'retry_pulse' in the per-part specification
that can currently take values of 'reset' or 'sck', the default being
'sck' which preserves the previous behaviour. Some newer parts
indicate that /RESET should be pulsed, while older parts say to pulse
SCK.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@212 81a1dc3b-b13d-400b-aceb-764788c761c2
* .cvsignore: Ignore autoconf files.
* AUTHORS: New file.
* ChangeLog: New file.
* Makefile: Removed file.
* Makefile.am: New file.
* NEWS: New file.
* README: New file.
* bootstrap: New file.
* configure.ac: New file.
* avr.c: Include ac_cfg.h (generated by autoconf).
* config.c: Include ac_cfg.h.
Include config_gram.h instead of y.tab.h.
* config.h: If HAS_YYSTYPE is not defined, define YYSTYPE.
* config_gram.y: Include ac_cfg.h.
* fileio.c: Include ac_cfg.h.
* lexer.l: Include config_gram.h instead of y.tab.h.
* lists.c: Include ac_cfg.h.
* main.c: Include ac_cfg.h.
* par.c: Include ac_cfg.h.
* pgm.c: Include ac_cfg.h.
* ppi.c: Include ac_cfg.h.
* stk500.c: Include ac_cfg.h.
* term.c: Include ac_cfg.h.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@192 81a1dc3b-b13d-400b-aceb-764788c761c2
its own file par.c, leaving low level parallel port accessor routines
in ppi.c to help with portability. Change the programmer type to
'PAR' now instead of 'PPI' - 'PAR' represents the parallel port
programmer type.
Be more liberal with 'static' function declarations within the
programmer implimentation files - these functions should never be
called directly - always use the programmer function references.
There are still a few places in 'main.c' that directly reference the
parallel programmer explicitly (par_getpinmask). These should be
fixed somehow.
Axe a few unused functions.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@190 81a1dc3b-b13d-400b-aceb-764788c761c2
Axel Wachtler
Joerg Wunsch
Rene Liebscher
Colin O Flynn
Brian S. Dean
Jan-Hinnerk Reichert
Eric Weddington
Theodore A. Roth