ef785a617a
Treat x bits in .conf SPI commands as 0
2022-07-04 12:30:37 +01:00
134509cc6f
adding support for all Linux baud rates v.2
...
If optiboot can work at higher bauds, why not avrdude.
Versoin 2 of #985 .
Linux uses the old-style bitmapped version of the Bxxxx macros.
2022-07-04 12:30:37 +01:00
963a1e54af
Fix JTAG transaction close issue
...
Fixes issue #366
2022-07-04 12:30:37 +01:00
b167e88422
Reduce programmer description string length
...
to less than 80 characters. #941 related
2022-07-04 12:30:37 +01:00
3893a21164
Fix avrftdi support for ATmega2560 et al (load extended address)
2022-07-04 12:30:25 +01:00
a21f3d20af
Merge branch 'avrdudes:main' into issue942
2022-06-28 22:38:47 +01:00
8cd6f357b1
Merge pull request #1013 from MCUdude/jtag3-eeprom-fix
...
JTAG3 UPDI EEPROM fix
2022-06-28 22:36:19 +02:00
7ec51a5185
Merge pull request #996 from dl8dtl/jtag3_retcode
...
Replace internal knowledge in jtag3.c by a public API
Supersedes #982
2022-06-28 22:21:50 +02:00
09c168a186
Merge branch 'avrdudes:main' into issue942
2022-06-28 20:56:49 +01:00
6d1c83e182
Merge pull request #993 from prchal/patch-1
...
adding support for all Linux baud rates
2022-06-26 22:59:49 +02:00
55dddc57cc
Merge pull request #979 from MCUdude/dragon-jtag-fix
...
Dragon JTAG fix: restart firmware after programming
2022-06-26 22:53:32 +02:00
89b0aa72e0
Attempt to fix EEPROM write issue #1009
2022-06-25 11:39:16 +02:00
ae0e3e2f8e
Fix a number of logic errors in the previous commits
...
RSP3_FAIL_CRC_FAILURE is 0x43 rather than 0x47.
jtag3_errcode() must only be applied to a reason code, not
to any general status code.
2022-06-22 23:33:53 +02:00
692c13ed98
Add missing chip erase delay for ATmega48/88/168/328PB
2022-06-19 19:40:31 +02:00
aa211f7580
Add missing efuse write delay for ATmega169/A/P/PA and ATmega328P
2022-06-19 19:23:34 +02:00
3b0a2abc20
Reduce programmer description string length
...
to less than 80 characters. #941 related
2022-06-19 10:53:07 +02:00
3082630430
Replace internal knowledge in jtag3.c by a public API
...
In certain situations (CRC failure, device locked), that JTAG3
read functions need to return an indication to the caller that
it is OK to proceed, and allow erasing the device anyway.
Historically, the JTAG3 code passed the respective protocol
errors directly (and unexplained) up to the caller, leaving
the decision to the caller how to handle the situation.
Replace that by a more common return value API. New code should
prefer this API instead of any hardcoded return values.
2022-06-15 23:32:22 +02:00
3148b31e01
Merge pull request #972 from earies/cmake-libdir-fix
...
Fix src/CMakeLists.txt to honor CMAKE_INSTALL_LIBDIR
2022-06-08 21:53:22 +02:00
fc9d640f0b
Merge pull request #945 from mariusgreuel/pr-micronucleus-macos-usb-issue
...
Fix micronucleus bootloader to check for unresponsive USB devices
2022-06-08 21:46:40 +02:00
bd8c17b35f
adding support for all Linux baud rates v.2
...
If optiboot can work at higher bauds, why not avrdude.
Versoin 2 of #985 .
Linux uses the old-style bitmapped version of the Bxxxx macros.
2022-06-07 11:50:03 +02:00
bdb4128de3
Fix JTAG transaction close issue
...
Fixes issue #366
2022-05-30 19:22:20 +02:00
3b0d7e5d5d
Fix src/CMakeLists.txt to honor CMAKE_INSTALL_LIBDIR
2022-05-21 14:25:27 -06:00
053c2dcdd3
CMake: Include GCC specific options also for MSYS2
2022-05-11 20:57:14 +02:00
8b61c9dd8f
CMake: Move MSVC compatibility shim into library
2022-05-11 20:56:05 +02:00
b9a012cebb
Fix .Dd macro in manpage
...
The correct format for .Dd according to mdoc(7) is -
.Dd month day, year
2022-05-08 20:35:32 +05:30
9bc28d410e
Post-7.0 changes
...
Update version date in configure.ac.
Update template in NEWS
2022-05-07 22:57:49 +02:00
a2e456ca8a
v7.0 release preparation
2022-05-07 22:20:31 +02:00
43ddea9102
Calibration memory of ATtiny43U is only 1 byte
...
Closes issue #921 .
2022-05-05 22:58:45 +02:00
01a9e42d7d
Fix typo in micronucleus message
2022-05-05 22:08:46 +02:00
c64f2030a1
Improve micronucleus bootloader user experience for unresponsive USB devices
2022-05-05 21:42:27 +02:00
3bdf138721
Fix micronucleus bootloader to check for unresponsive USB devices
2022-05-05 20:45:47 +02:00
a4c9fcdcd7
More fixes for PR #915
2022-05-02 22:51:22 +02:00
ca16fc2ce6
Merge pull request #930 from cederom/cederom-programmer-avrftdi-ktlink
...
Added KT-LINK FT2232H interface with IO switching and voltage buffers.
2022-05-01 22:29:46 +02:00
d7c59ca2f9
Merge pull request #931 from MCUdude/linuxspi-baud-fix
...
Fix linuxspi baud to clock period calculation
2022-05-01 22:26:23 +02:00
4bcd0eaa1d
Fix a number of mistakes in avrdude.conf.in
...
Stefan Rueger found a lot of mistakes in this file.
Closes #915
2022-05-01 21:55:50 +02:00
033b2ed796
Treat x bits in .conf SPI commands as 0
2022-04-29 00:37:28 +01:00
580c37fbfe
Describe -A in the man and .texi documentation
2022-04-29 00:14:45 +01:00
f47ec634f8
On verify always verify full input file
2022-04-28 17:53:10 +01:00
52734bafc6
Add option -A to separately disable trailing-0xff removal
2022-04-28 17:29:06 +01:00
52b20f4a28
Provide self-documenting API for disabling trailing-0xff removal
2022-04-28 17:26:09 +01:00
2397984d2b
Disable trailing-0xff removal when invoking arduino programmer
2022-04-27 18:54:13 +01:00
08ad5ea445
Fix broken texinfo
...
@ must be escaped as @@
2022-04-26 23:19:20 +02:00
e18d436f88
Move evaluating 'is flash' from caller to callee avr_mem_hiaddr()
2022-04-15 20:48:46 +01:00
ed38456f83
Piggy-back 'Do not remove trailing 0xff' onto option -D
2022-04-15 20:46:40 +01:00
9d025e6a70
Fix linuxspi baud to clock period calculation
...
#927 related
2022-04-10 23:36:53 +02:00
b99a145b9f
Added KT-LINK FT2232H interface with IO switching and voltage buffers.
...
Example TPI run: https://github.com/avrdudes/avrdude/issues/928
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
2022-04-10 22:28:44 +02:00
1363c7fe76
Fix buffer overflow issue
...
when in terminal fill mode
2022-04-09 20:08:44 +02:00
08bd5fa938
Add string write to terminal example
2022-04-05 19:37:45 +02:00
17b67da03e
Make sure memory can be filled with a string
...
... and not just the last character
2022-04-04 09:38:02 +02:00
795dd91575
Code cleanup + formatting
2022-04-01 22:23:55 +02:00
8f100f5df3
Initial support for string write
2022-04-01 21:57:53 +02:00
f0f9059ade
Tweak nexttok for better string handling
...
Now a string that starts and ends with a quote (") is combined into a single (argc) argument rather than being split where spaces used to be
2022-04-01 16:52:59 +02:00
e069871c8e
Increased timeout passed to hid_read_timeout() - set to 10000 for consistency ( #901 )
2022-03-31 23:26:53 +02:00
f22bc62b06
Mask out unused ATmega32U4 efuse bits ( #909 )
...
Closes #446
2022-03-31 23:13:57 +02:00
d09a4e93a2
Add ATmega16U4 to avrdude.conf ( #910 )
...
Closes #447
2022-03-31 23:12:32 +02:00
aa7ae7bb87
Add MacOS serial/parallel port note ( #908 )
...
Closes #510
2022-03-31 22:32:57 +02:00
1d0cbc2246
Add progressbar for read and write command ( #912 )
2022-03-31 22:21:49 +02:00
8697f6def7
Remove remnants of the old erase-cycle counter from examples
2022-03-21 06:38:28 +01:00
981a6f1f20
Restore the -u option as a dummy.
...
Closes #890
2022-03-20 21:50:45 +01:00
0c722bf288
Merge pull request #903 from dl8dtl/term-docs
...
Terminal mode documentation
2022-03-19 23:04:50 +01:00
28d1442fc8
Merge pull request #902 from MCUdude/terminal-fix
...
Minor terminal write improvements
2022-03-19 23:02:24 +01:00
75e4d06463
Merge pull request #899 from MCUdude/avrdude-conf-fix
...
Fix errors in Avrdude.conf
This also closes #897
2022-03-19 23:01:12 +01:00
99f191a0ca
Merge pull request #898 from dl8dtl/macos-nonstandard-baudrates
...
Macos nonstandard baudrates
closes #266
2022-03-19 22:57:37 +01:00
33bace0cee
Provide an example for the second form of the "write" command
...
In terminal mode, there are two forms of "write", one that
explicitly mentions all data values, and a second one that
instead specifies a total range to write, where the last data
value given is replicated as needed.
2022-03-19 17:30:55 +01:00
0c912a201f
Try making the cindex (concept index) meaningful
...
Rearrange existing @cindex entries, add a lot of new ones.
2022-03-19 00:03:17 +01:00
31feb9ff75
Link the concept index
2022-03-19 00:00:54 +01:00
29a01c1047
Terminal mode: fix documentation of second version of "write"
...
Right after start_addr, the next element is the number of bytes
to be written.
2022-03-18 23:42:32 +01:00
426ea1fa78
Add missing free()'s
2022-03-18 21:20:58 +01:00
6a5988ad64
Print write info message when in verbose mode
2022-03-18 21:19:36 +01:00
dcf771424b
Increase buffer size to prevent potential overflow
2022-03-18 19:17:17 +01:00
67b56d322b
Update texinfo documentation for terminal-mode changes
...
This documents the recent changes that have been implemented in
terminal mode.
2022-03-17 23:13:52 +01:00
27d201acb1
Also tweak smallexample
2022-03-17 07:21:33 +01:00
9bc4a2463d
Attempt to tweak CSS of the generated HTML docs a bit
2022-03-16 23:19:45 +01:00
da1271642e
Remove the pointer to the mailing list
...
It makes more sense to point people to Github issue trackers now,
even for questions.
2022-03-13 22:52:44 +01:00
416c465ec0
Bring the texinfo doc up to date
...
* remove copyright years; they are not meaningful anyway
* reflect the project move from Savannah to Github
2022-03-13 00:13:29 +01:00
41f524c1ba
Use the same device signature on ATmega165 and ATmega165A
2022-03-08 13:17:01 +01:00
5ebb9047be
Fix incorrect ATxmega128D4 flash page size
2022-03-08 12:50:17 +01:00
fde7881611
Fix incorrect ATmega64M1 flash and eeprom size
...
#897 related
2022-03-08 12:34:06 +01:00
1c94c95f1c
Fix target names not following the standard
2022-03-08 12:32:41 +01:00
a4cbd5c6fc
Append a newline to the nonstandard baudrate warning
2022-03-07 23:25:36 +01:00
87b39637ff
Implement nonstandard baudrate handling on MacOS
...
Alas, MacOS doesn't handle nonstandard baud rates like other systems
in regular tcsetattr() calls. Instead, they invented a new ioctl
(IOSSIOSPEED). So, if we notice we are going to configure a
nonstandard rate on MacOS, issue that ioctl after configuring
everything else using tcsetattr().
2022-03-07 23:20:50 +01:00
34168759b0
Fix a one-bit error in ATmega165* signature read command.
2022-03-07 22:52:14 +01:00
0f4b5b223b
Merge pull request #894 from MCUdude/terminal
...
Improve terminal read functionality
2022-03-03 23:14:37 +01:00
0b82b5c573
Merge pull request #896 from MCUdude/terminal-write
...
Fix ugly terminal write bug
2022-03-03 23:12:47 +01:00
9355d67e0f
Merge pull request #893 from MCUdude/userrow-fix
...
Support both userrow and usersig names
2022-03-03 23:09:20 +01:00
d9c52249a9
Restructure "write mode" code
2022-03-03 19:37:42 +01:00
c7174d7678
Update description
2022-03-02 20:24:51 +01:00
df6e2eea12
Fix terminal write bug
...
Wouldn't write data properly after an integer >= 2 bytes was written
2022-03-02 20:09:59 +01:00
0c8b42524e
For UPDI devices do not add offset when accessing flash.
2022-03-01 14:24:33 +01:00
b688b1f601
Add support for read with ... "operator"
...
This means that you can use ... to read the "rest" of the memory.
$ read eeprom ... will dump the entire memory
$ read eeorm 0x80 ... will dump the memory from address 0x80 to the end address
2022-02-28 23:59:30 +01:00
d89f695c31
Incread default read size to 256 bytes
2022-02-28 23:59:30 +01:00
1f2b570216
Support both userrow and usersig names
2022-02-28 19:46:47 +01:00
07ea8f5e09
Add userrow and usersig aliases
2022-02-21 22:36:06 +01:00
0269817217
Add a missing @end table
...
Has been slipped when adding some -x documentation before.
2022-02-21 22:01:05 +01:00
008f95f6ff
Merge pull request #880 from MCUdude/terminal-write
...
Avrdude terminal write improvements
2022-02-21 21:53:38 +01:00
a73567893b
Properly handle negative number sizes
2022-02-21 13:43:38 +01:00
fa706f0d01
Handle data size warning better
...
Now it only outputs a warning when the size of the data the user input is actually ambiguous
2022-02-20 23:03:31 +01:00
3532c567ac
Add suffix for 8-bit data
...
use [val]HH or [val]hh to force 8-bit writes to memory
2022-02-20 22:23:15 +01:00
bb99a36a14
Formatting
...
Use enums for write mode, and change datatypes from int/long/char to int32_t/uint8_t where possible
2022-02-20 19:08:30 +01:00
a9b756e5c7
Add struct initialization list
2022-02-20 12:46:53 +01:00
Stefan Rueger
prchal
MCUdude
Stefan Rueger
Jörg Wunsch
Marius Greuel
Ebben Aries
Subhaditya Nath
Tomasz 'CeDeROM' CEDRO
Nav
Jan Egil Ruud