Commit Graph

119 Commits

Author SHA1 Message Date
joerg_wunsch c1469e5135 bug #44717: avrdude creates empty flash dump
When about to write an empty flash dump file, warn about this to avoid
surprises.

Document the truncation of trailing 0xFF bytes for flash memory areas.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1355 81a1dc3b-b13d-400b-aceb-764788c761c2
2015-04-09 19:50:30 +00:00
joerg_wunsch 4860f8c6e2 patch #8437: [PATCH] Serial-over-ethernet for Win32
* configure.ac: Check for ws2_32 library
* ser_win32.c: Add hooks for forwarding serial data over
TCP connections
* avrdude.1: Drop previous restriction of -P net:
* doc/avrdude.conf: (Dito.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1350 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-11-25 20:00:33 +00:00
joerg_wunsch 3f9c9ba793 Allow the -B option argument to be suffixed with Hz, kHz, or MHz, in
order to specify a bitclock frequency rather than period.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1347 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-11-23 21:49:56 +00:00
rliebscher e88899e0a2 patch #8504 buspirate: Also support "cpufreq" extended parameter in binary mode
* buspirate.c: applied patch + switch off at disable (even when
a reset follows) + some general whitespace/tab cleanup

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1339 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-11-13 13:53:47 +00:00
rliebscher 81a6464d53 fix some more spelling errors
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1320 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-06-11 08:45:14 +00:00
joerg_wunsch 38e6a4061f Remove the note that users might edit the system-wide config file.
This file will be overwritten by the next installation, so it's not a
good idea to manually modify it.  Using the -C +file option is a much
better way for user modifications.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1296 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-04-05 07:58:58 +00:00
joerg_wunsch becc8e9eea Add the new Atmel-ICE, in all of JTAG, PDI, dW, and ISP modes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1288 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-02-28 14:36:38 +00:00
joerg_wunsch 0fe50d77de Documentation updates for EDBG.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1285 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-02-27 13:32:58 +00:00
joerg_wunsch b6fd404109 Implement the meat of FLIP version 1 protocol, and document it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1269 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-01-17 16:54:33 +00:00
joerg_wunsch 6818690c26 Submitted by Kirill Levchenko:
patch #7896: DFU FLIPv2 programming support
* pgm_type.c: Add the flip2 programmer type.
* config_gram.y: Allow for the usbid keyword in a device definition.
* avrdude.conf.in: Add usbpid values to those Xmega devices where
applicable.
* avrpart.h: Add usbpid device field.
* dfu.c: (New file.)
* dfu.h: (New file.)
* flip.c: (New file.)
* flip.h: (New file.)
* Makefile.am: Add new files.
* doc/avrdude.texi: Document the changes.
* avrdude.1: (Dito.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1258 81a1dc3b-b13d-400b-aceb-764788c761c2
2014-01-15 13:34:49 +00:00
joerg_wunsch 7e10c77ff3 bug #35474 Feature request: print fuse values in safemode output
* config_gram.y: New configuration token "default_safemode".
* lexer.l: (Dito.)
* avrdude.conf.in: (Dito.)
* config.h: Add variable default_safemode.
* config.c: (Dito.)
* main.c: Handle default_safemode, including -u option.
* avrdude.1: Document all this.
* doc/avrdude.texi: (Dito.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1226 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-09-13 17:22:38 +00:00
joerg_wunsch ba8b2ebb53 Implement and document the "verbose" terminal mode command.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1211 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-09-08 19:31:48 +00:00
joerg_wunsch ad15b61b0b Remove the erase cycle counter (options -y / -Y).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1203 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-09-03 20:13:37 +00:00
joerg_wunsch a305ac0143 Add option -l logfile to redirect diagnostic messages to a logfile rather
than stderr.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1179 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-05-16 09:11:32 +00:00
rliebscher 825c570746 patch #7936 Patch to support BusPirate AVR Extended Commands mode
* buspirate.c: added support for BusPirate AVR Extended Commands mode
	* avrdude.1: added doc for nopagedread parameter
	* doc/avrdude.texi: added doc for nopagedread parameter


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1137 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-30 18:56:31 +00:00
rliebscher f33873b1ba patch #7723 Bus Pirate “raw-wire” mode which can run down to 5 kHz
* buspirate.c: added raw wire mode
	* avrdude.1: added doc for rawfreq parameter
	* doc/avrdude.texi: added doc for rawfreq parameter

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1136 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-30 17:58:48 +00:00
rliebscher 8d6f310736 patch #7165 Add support for bitbanging GPIO lines using the Linux sysf GPIO interface
* doc/avrdude.texi,avrdude.1: added doc for linuxgpio 
	* avrdude.conf.in: added template for linuxgpio programmer
	* config_gram.y: pin numbers restricted to [PIN_MIN, PIN_MAX]
	* pindefs.h: added PIN_MIN, PIN_MAX, removed unused LED_ON/OFF
	* configure.ac: configure option enable-linuxgpio, print of enabled options
	* linuxgpio.[ch]: new source for linuxgpio programmer
	* Makefile.am: added linuxgpio to sources list
	* pgm_type.c: added linuxgpio to programmer types list

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1132 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-09 19:23:30 +00:00
joerg_wunsch 97357595b6 * pgm_type.c: Add "jtagice3_isp" programmer hook
* avrdude.conf.in: Add "jtag3isp" programmer
* jtag3.c: jtag3_setparm() is now public
* jtag3.h: (Dito)
* stk500v2_private.h: Command 0x1D is CMD_SPI_MULTI only
for STK500v2, AVRISPmkII, and JTAGICEmkII; for JTAGICE3,
it's CMD_SET_SCK now; also add CMD_GET_SCK
* avrpart.c (avr_get_output_index): New function
* avrpart.h: (Dito)
* stk500v2.c: Implement the pasthrough programmer glue logic
for JTAGICE3 in ISP mode
* stk500v2.h: (Dito)
* avrdude.1: Document the JTAGICE3 support.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1119 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 15:52:38 +00:00
joerg_wunsch 8fdf4d4071 Replace outdated FSF postal address by a reference to
the GPL info on their website.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1107 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-20 14:03:50 +00:00
rliebscher ae88486420 patch #7184 Support for PICKit2 programmer
* Makefile.am: add pickit2 files
	* pickit2.[ch]: new programmer implementation
	* pgm_type.c: add pickit to list
	* avrdude.1: documentation for pickit2
	* doc/avrdude.texi: documentation for pickit2
	* avrdude.conf.in: add pickit2 programmer entry

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1102 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-08-15 18:34:53 +00:00
joerg_wunsch f5e8183f30 Implement ELF file reading (finally). Requires libelf(3) to be
present on the host system.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1056 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-02-02 16:52:45 +00:00
rliebscher 2f9a27cd3f patch #7437 modifications to Bus Pirate module
patch #7686 Updating buspirate ascii mode to current firmware, use AUX
            as clock generator, and setting of serial receive timeout
  * buspirate.c: added paged_write, changed binary mode setup/detection,
                 added clock output on AUX pin
  * avrdude.1: updated documentation
  * doc/avrdude.texi: updated documentation


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1052 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-01-31 19:01:00 +00:00
rliebscher 12c2affe92 patch #7699 Read additional config files
* main.c: Added reading of additional config files
* avrdude.1: updated man page
* doc/avrdude.texi: updated documentation


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1038 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-01-10 18:07:19 +00:00
rliebscher 0f518dba3d patch #7687: Autogenerating programmers and parts lists for docs
(generating the parts lists, programmers lists follows later)

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1026 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-12-29 12:53:20 +00:00
joerg_wunsch 2f1176438b Document the programmer type restrictions for AT90S1200 devices.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1005 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-30 07:28:21 +00:00
joerg_wunsch a059a059c8 Update the list of supported AVR devices.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@994 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 21:12:33 +00:00
joerg_wunsch 0a1f0ad778 Submitted by Stefan Tomanek:
patch #7542: add default_bitclock to configuration files




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@988 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 20:30:26 +00:00
joerg_wunsch b7c70ab98c Submitted by Brett Hagman:
Add support for the "Wiring" board/bootloader
* wiring.c: New file.
* wiring.h: (Ditto.)
* Makefile.am: Add new files.
* stk500v2_private.h: Reorganize so some functions and struct
pdata are globally known.
* stk500v2.c: (Ditto.)
* stk500v2.h: (Ditto.)
* lexer.l: Add new programmer keywords.
* config_gram.y: (Ditto.)
* avrdude.conf.in: Add "wiring" programmer entry.
* avrdude.1: Document the new programmer.
* doc/avrdude.texi: (Ditto.)
* AUTHORS: Add Brett Hagman.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@987 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 20:22:09 +00:00
joerg_wunsch d39d171985 Submitted by Juergen Weigert:
bug #22720: avrdude-5.5 ignores buff settings in avrdude.conf
(Note that the actual bug the subject is about has been fixed
long ago.)
* update.c (do_op): fix a diagnostic message
* pgm.h: add exit_datahigh field
* par.c: set and act upon the exit_datahigh field
* avrdude.1: document the new -E options
* doc/avrdude.texi: (Ditto.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@985 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 12:35:08 +00:00
joerg_wunsch 43bd052abf Submitted by Doug Springer, based on work by
Wolfgang Moser, Ville Voipio, Hannes Weisbach
patch #7486: Patch to add FT2232C/D, FT2232H, FT4232H,
usbvid, usbpid, usbdev for USB support - Based on #7062
* avrftdi.c: New file.
* avrftdi.h: (Ditto.)
* configure.ac: Add check for libftdi.
* config_gram.y: Add AVRFTDI and per-programmer USB string
keywords.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add avrftdi and 2232HIO programmers.
* pgm.h: Add USB parameters.
* Makefile.am: Add avrftdi.c and avrftdi.h.
* AUTHORS: Mention the new authors.
* avrdude.1: Document the changes.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@979 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-25 16:12:30 +00:00
joerg_wunsch 4ef2350350 Submitted by Grygoriy Fuchedzhy:
bug #31779: Add support for addressing usbtinyisp with -P option
* usbtiny.c (usbtiny_open): Add logic to distinguish multiple USBtinyISP
programmers by their bus:device tuple.
* doc/avrdude.texi: Document the new functionality.
* avrdude.1: (Ditto.)




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@974 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-17 15:24:09 +00:00
joerg_wunsch 46715b4296 Implement TPI mode for AVRISPmkII/STK600.
Add ATtiny4/5/9/10 to avrdude.conf.in.
Document TPI and new device support.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@916 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-15 16:36:13 +00:00
joerg_wunsch 24e0a12960 Submitted by clint fisher:
patch #7038: Adding Atmega32U4 Device to avrdude.conf.in
* avrdude.conf.in (atmega32u4): New device.
* avrdude.1: Document the new device support.
* doc/avrdude.texi: (Dito.)




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@915 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-14 15:26:09 +00:00
joerg_wunsch f94da91610 Submitted by Thomas Pircher:
patch #6927: Documentation patches
* doc/avrdude.texi: Fix various typos, and remove the last
remnants of obsoleted options -i/-o/-m/-f.
* avrdude.1: Merge typo fixes from avrdude.texi where
applicable.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@914 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-14 15:11:47 +00:00
joerg_wunsch 0d8f1889ab * avrdude.1: Update documentation to match the reality (device
support, memory areas).
* doc/avrdude.texi: Update documentation to match the
reality (device support, programmer support, memory areas).
Merge buspirate-specific comments from avrdude.1.
* jtagmkII.c: Add some firmware feature checks.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@913 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-14 13:46:02 +00:00
dhoerl 3e7897371a * fileio.c: ihex2bin did not properly handle files > 64K bytes
* usb_libusb.c: re-enabled usb_reset for Macs (no reset causes lots of failures)
* avrdude.1: spacing issue for ucr2 fixed.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@880 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-11-29 20:19:15 +00:00
mludvig 7d1ea872cd * buspirate.c: Implemented reset= and speed= extended parameters.
* avrdude.1: Document the change.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@879 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-11-09 02:18:40 +00:00
mludvig fd1c9b4910 * avrdude.1: Added info about BusPirate.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@877 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-11-04 03:32:55 +00:00
dhoerl 93245b144f Added AVR32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@864 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 23:47:50 +00:00
joerg_wunsch e41d85664d Submitted by Lars Immisch:
patch #6750: Arduino support - new programmer-id
* arduino.c: New file, inherits stk500.c.
* arduino.h: New file.
* Makefile.am: Add arduino.c and arduino.h.
* config_gram.y: Add arduino keyword.
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)
* avrdude.1: Document the new programmer type.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@808 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-25 09:39:04 +00:00
joerg_wunsch 3815878ed1 Submitted by Andrew O. Shadoura:
bug #25156: add direct SPI transfer mode
* bitbang.c: Implement direct SPI transfers.
* bitbang.h: (Ditto.)
* par.c: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* term.c: Add the "spi" and "pgm" commands.
* avrdude.1: Document the changes.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@797 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 15:31:27 +00:00
joerg_wunsch 13edd1c5b6 Add the ATmega128RFA1, and document this.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@790 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-05 16:20:29 +00:00
joerg_wunsch 6904c732f4 patch #6609: Using PCI parallel port cards on Windows
* ppiwin.c (ppi_open): If the port parameter passed from the
-p option is neither lpt1/2/3, try interpreting it directly as
a base address.
* avrdude.1: Document the change.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@786 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-05 20:53:51 +00:00
joerg_wunsch a37bbfab57 * main.c: Remember whether the device initialization worked, and
allow to continue with -F if it failed yet do not attempt to
perform anything on the device itself.  That way, -tF could be
specified for programmers like the STK500/STK600 even without a
device connected, just in order to allow changing parameters on
the programmer itself.
* avrdude.1: Document that possible use of the -F option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@779 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-29 21:26:55 +00:00
joerg_wunsch 15fc8af421 First implementation of ATxmega support. By now, only the
PDI mode of the STK600 is supported.  Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 22:53:40 +00:00
joerg_wunsch 95200e0522 Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>:
Add check for buffermode feature, and use it if present.  Can be
turned off using -x no_blockmode.
* avr910.c: Implement buffermode test and usage.
* avrdude.1: Document -x no_blockmode.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@771 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-06-07 20:55:04 +00:00
joerg_wunsch da0f0105bb Add support for the -x devcode option, and document it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@769 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-24 21:22:04 +00:00
joerg_wunsch 8b391a8150 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
joerg_wunsch 0c8bd41a10 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
joerg_wunsch eb27298b5d Submitted by <ladyada@gmail.com>:
Patch #6233: Add support for USBtinyISP programmer
* usbtiny.c: New file.
* usbtiny.h: (Ditto.)
* Makefile.am: Include usbtiny into the build.
* avrdude.conf.in: (Ditto.)
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the usbtiny support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@749 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 18:03:02 +00:00