In order to get meaningful const properties for the PROGRAMMER, AVRPART and
AVRMEM arguments, some code needed to be moved around, otherwise a network of
"tainted" assignments risked rendering nothing const:
- Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm,
const AVRPART *p); this allows changes in the PROGRAMMER structure after
the part is known. For example, use TPI, UPDI, PDI functions in that
programmer appropriate to the part. This used to be done later in the
process, eg, in the initialize() function, which "taints" all other
programmer functions wrt const and sometimes requires other finessing with
flags etc. Much clearer with the modified enable() interface.
- Move TPI initpgm-type code from initialize() to enable() --- note that
initpgm() does not have the info at the time when it is called whether or
not TPI is required
- buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate
modification of the flag does not change PROGRAMMER structure)
- Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in
AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and
FLAGS32_WRITE bits
- Move the xbeeResetPin component to private data in stk500.c as this is
needed by xbee when it saddles on the stk500 code (previously, the flags
component of the part was re-dedicated to this)
- Change the way the "chained" private data are used in jtag3.c whilst
keeping the PROGRAMMER structure read-only otherwise
- In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to
stk500v2_enable() so the former keeps the PROGRAMMER structure read-only
(for const assertion).
- In usbasp change the code from changing PROGRAMMER functions late to
dispatching to TPI or regular SPI protocol functions at runtime; reason
being the decision whether to use TPI protocol is done at run-time
depending on the capability of the attached programmer
Also fixes Issue #1071, the treatment of default eecr value.
This commit replaces fixed-string buffers in PROGRAMMER, AVRPART and AVRMEM
that are dealt with by the parser and grammar. Now, string assignments are
always to const char *, ie, these are read-only strings with arbitrary
length.
config_gram.y now only needs to consider one type of string assignment.
This commit also
- Replaces the simple linear-search cache_string() function with faster
hashed cache_string(). Either way, the returned value is likely to be
shared, so should never be free()'d.
- Duplicates hvupdi_support list in pgm_dup() and frees it in pgm_free()
- Adds const qualifier to some function args in avrpart.c and pgm.c
- Hardens some functions against being called with NULL pointers
- Ensures _new() and _dup() functions for parts, programmers and memory
return a suitable memory. Out of memory triggers exit in one of three
functions, cfg_malloc(), cfg_realloc() and cfg_strdup(); there is
rarely anything useful that AVRDUDE or, for that matter, any
application compiled against libavrdude can do once you run out of
memory as AVRDUDE/libavrdude rely heavily on allocation of memory.
This commit deals with default_programmer, default_serial, default_parallel
and default_spi. The long term objective is to remove all fixed-size buffers
from the structures that lexer.l and config_gram.y deal with.
- Replace strdup(s) with cfg_strdup(funname, s) that exits on out of mem
- Replace malloc(n) with cfg_malloc(funname, n) that exits on out of mem
- Change multiline string scanning in lexer.l to avoid core dump
- Remove global variables string_buf and string_bug_ptr
- Ensure reading strings unescapes strings C-Style
- Ensure writing strings escapes strings C-Style again
Commit looks longer than needed as unescape() and auxiliary functions needed
to be moved from term.c (not in libavrdude) to config.c (in libavrdude).
Also changed usbdev, usbsn, usbvendor and usbproduct components from
PROGRAMMER structure to be cached string pointers rather than fixed-size
arrays. These will be initialised by pgm_new() with a pointer to nul;
This commit checks -U update requests for
- Typos in memory names
- Whether the files can be written or read
- Automatic format detection if necessary
before opening the programmer. This to reduce the chances of the
programming failing midway through.
Minor additional changes:
- Give strerror() system info when files are not read/writeable
- Lift the auto detection message from MSG_INFO to MSG_NOTICE
- Provide fileio_fmt_autodetect() in the AVRDUDE library
- Rename fmtstr() in the AVRDUDE library to fileio_fmtstr() to
avoid name clashes when an application links with it
Example:
$ avrdude -U - -U typo:r:.:h -U eeprom:w:testin:r -p ... -c ...
avrdude: can't auto detect file format for stdin/out, specify explicitly
avrdude: unknown memory type typo
avrdude: file . is not writeable (not a regular or character file?)
avrdude: file testin is not readable. No such file or directory
The check for typos in -U memory names against a list of known memory names
now happens after the config files have been read, so newly declared memory
names can be considered. This commit also weakens the check against existence
of a known memory: it is now sufficent for a name to pass when it could be
the initial string of any known memory of any part. Any -U memory that cannot
possibly be matched up with a known memory is considered a typo and leads to
an exit before the programmer is opened.
This to protect users from typos that leave a device partially programmed.
When every -U memory name might be matching one of the known memories, the
programming is attempted. If the part to be programmed turns out not to have
a particular -U memory, AVRDUDE warns the user and skips this -U update.
This to support unifying interfaces that call AVRDUDE with potentially more
memories than the actual part has (eg, efuse on ATmega8).
$ avrdude -qp m8 -c ... -U efuse:w:0xff:m && echo OK
avrdude: AVR device initialized and ready to accept instructions
avrdude: skipping -U efuse:... as memory not defined for part ATmega8
avrdude done. Thank you.
OK
Counting the number of bytes written to a memory and/or verified is not
trivial owing to potential holes in the input file and to potential trailing
0xff bytes in flash memory that are not written per default (but see -A). The
new function memstats(), which is best called just after an input file has
been read into mem->buf/mem->tags, computes the right number of bytes written
and allows easy computation of the number of bytes verified.
This commit also changes the strategy for the default verification after
writing to a chip memory, so that the input file only needs reading once thus
enabling successful verification of stdin input files.
Other, minor changes:
- Improving the grammar of AVRDUDE output, eg, 1 byte written instead of
1 bytes written
- Better description of the input file structure in terms of its sections,
the interval it spans, the number of pages, the number of padding bytes
in pages, and the number of actually cut off trailing 0xff bytes for flash
- Printing <stdin> or <stdout> instead of - in the -U routines
- Option -V no longer needs to be specified before option -U in order to work
As an aside this commit also provides useful helper functions for printing
plural(), inname(), outname() and interval() all of which return strings fit
for printing.
$ avrdude -qp ATmega2560 -c usbtiny -U blink-mega2560+lext-test.hex
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e9801 (probably m2560)
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: input file blink-mega2560+lext-test.hex auto detected as Intel Hex
avrdude: reading input file blink-mega2560+lext-test.hex for flash
with 1346 bytes in 4 sections within [0, 0x3106d]
using 7 pages and 446 pad bytes
avrdude: writing 1346 bytes flash ...
avrdude: 1346 bytes of flash written
avrdude: verifying flash memory against blink-mega2560+lext-test.hex
avrdude: 1346 bytes of flash verified
avrdude done. Thank you.
$ avrdude -qp ATmega328P -c usb-bub-ii -U sketch-ending-in-ff.hex
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: input file sketch-ending-in-ff.hex auto detected as Intel Hex
avrdude: reading input file sketch-ending-in-ff.hex for flash
with 2160 bytes in 1 section within [0, 0x888]
using 17 pages and 16 pad bytes, cutting off 25 trailing 0xff bytes
avrdude: writing 2160 bytes flash ...
avrdude: 2160 bytes of flash written
avrdude: verifying flash memory against sketch-ending-in-ff.hex
avrdude: 2185 bytes of flash verified
avrdude done. Thank you.
$ echo "Hello, world..." | avrdude -qp ATmega328P -c ... -U eeprom:w:-:r
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading input file <stdin> for eeprom
avrdude: writing 16 bytes eeprom ...
avrdude: 16 bytes of eeprom written
avrdude: verifying eeprom memory against <stdin>
avrdude: 16 bytes of eeprom verified
avrdude done. Thank you.
This enables the new quell terminal command to switch on and off progress
reports to the terminal. The code for this was moved from main.c to term.c.
It can be used as library call for other frontends than main.c
-p \*/c check address bits in SPI commands
-p \*/d description of core part features
-p \*/o opcodes for SPI programming parts and memories
-p \*/s show avrdude.conf entries of parts
-p \*/ss show full avrdude.conf entry as tab separated table
-p \*/w wd_... constants for ISP parts
-p \*/\* all of the above except -p \*/s
-p \* same as -p\*/\*
In certain situations (CRC failure, device locked), that JTAG3
read functions need to return an indication to the caller that
it is OK to proceed, and allow erasing the device anyway.
Historically, the JTAG3 code passed the respective protocol
errors directly (and unexplained) up to the caller, leaving
the decision to the caller how to handle the situation.
Replace that by a more common return value API. New code should
prefer this API instead of any hardcoded return values.
This feature has been designed with the sometimes quite flakey direct
(parallel or serial port attached) bitbang programming adapters in
mind that were quite common about two decades ago.
With parallel ports vanishing from modern PCs almost completely, and
the advent of various USB-attached low-cost programming devices,
this class of programmers disappeared almost completely.
Furthermore, the fuse combinations that were covered by the feature
are no longer around on all recent AVR devices, so for an ever
increasing number of devices, safemode already became meaningless and
was turned off anyway.
With the prospective version 7.x release, it's a good point in time to
introduce a major change like this one.
For one, this allows us to use MSG_DEBUG in order to emit debug
messages (requires -v processing).
As another effect, if the -C conffile option was given, there is no
need at all to run through all the process of looking up a system
config file - it's right there already.
Also, move it after the logfile creation if -l logfile was given, so
the respective debug message can go to the logfile.
* Find 'avrdude.conf' based on absolute path to executable
* Update coding style
* Update coding style
* Update 'src/doc/avrdude.texi' to reflect the new search method for 'avrdude.conf'
Stefan Rueger
MCUdude
Stefan Rueger
Joerg Wunsch
Marius Greuel
Yegor Yefremov
Kristof Mulier