Submitted by Lars Immisch:

patch #6750: Arduino support - new programmer-id
* arduino.c: New file, inherits stk500.c.
* arduino.h: New file.
* Makefile.am: Add arduino.c and arduino.h.
* config_gram.y: Add arduino keyword.
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)
* avrdude.1: Document the new programmer type.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@808 81a1dc3b-b13d-400b-aceb-764788c761c2

ChangeLog

@@ -1,3 +1,16 @@
+2009-02-25  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
+
+	Submitted by Lars Immisch:
+	patch #6750: Arduino support - new programmer-id
+	* arduino.c: New file, inherits stk500.c.
+	* arduino.h: New file.
+	* Makefile.am: Add arduino.c and arduino.h.
+	* config_gram.y: Add arduino keyword.
+	* lexer.l: (Ditto.)
+	* avrdude.conf.in: (Ditto.)
+	* avrdude.1: Document the new programmer type.
+	* doc/avrdude.texi: (Ditto.)
+
 2009-02-25  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
 
 	* stk500v2.c: Turn all non-const static data into instance data.

Makefile.am

@@ -77,6 +77,8 @@ dist-hook:
 libavrdude_a_SOURCES = \
 	config_gram.y \
 	lexer.l \
+	arduino.h \
+	arduino.c \
 	avr.c \
 	avr.h \
 	avr910.c \

NEWS

@@ -21,6 +21,7 @@ Current:
   * New programmers supported:
 
       - AT89ISP cable (patch #6069)
+      - Arduino
 
   * Add support for the -x option to pass extended parameters to the
     programmer backend.

arduino.c

@@ -0,0 +1,94 @@
+/*
+ * avrdude - A Downloader/Uploader for AVR device programmers
+ * Copyright (C) 2009 Lars Immisch
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* $Id$ */
+
+/*
+ * avrdude interface for Arduino programmer
+ *
+ * The Arduino programmer is mostly a STK500v1, just the signature bytes
+ * are read differently.
+ */
+
+#include "ac_cfg.h"
+
+#include <stdio.h>
+#include <string.h>
+
+#include "avrdude.h"
+#include "pgm.h"
+#include "stk500_private.h"
+#include "stk500.h"
+#include "serial.h"
+
+/* read signature bytes - arduino version */
+static int arduino_read_sig_bytes(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m)
+{
+  unsigned char buf[32];
+
+  /* Signature byte reads are always 3 bytes. */
+
+  if (m->size < 3) {
+    fprintf(stderr, "%s: memsize too small for sig byte read", progname);
+    return -1;
+  }
+
+  buf[0] = Cmnd_STK_READ_SIGN;
+  buf[1] = Sync_CRC_EOP;
+
+  serial_send(&pgm->fd, buf, 2);
+
+  if (serial_recv(&pgm->fd, buf, 5) < 0)
+    return -1;
+  if (buf[0] == Resp_STK_NOSYNC) {
+    fprintf(stderr, "%s: stk500_cmd(): programmer is out of sync\n",
+			progname);
+	return -1;
+  } else if (buf[0] != Resp_STK_INSYNC) {
+    fprintf(stderr,
+			"\n%s: arduino_read_sig_bytes(): (a) protocol error, "
+			"expect=0x%02x, resp=0x%02x\n",
+			progname, Resp_STK_INSYNC, buf[0]);
+	return -2;
+  }
+  if (buf[4] != Resp_STK_OK) {
+    fprintf(stderr,
+			"\n%s: arduino_read_sig_bytes(): (a) protocol error, "
+			"expect=0x%02x, resp=0x%02x\n",
+			progname, Resp_STK_OK, buf[4]);
+    return -3;
+  }
+
+  m->buf[0] = buf[1];
+  m->buf[1] = buf[2];
+  m->buf[2] = buf[3];
+
+  return 3;
+}
+
+void arduino_initpgm(PROGRAMMER * pgm)
+{
+	/* This is mostly a STK500; just the signature is read
+     differently than on real STK500v1 */
+  stk500_initpgm(pgm);
+
+  strcpy(pgm->type, "Arduino");
+  pgm->read_sig_bytes = arduino_read_sig_bytes;
+
+}

arduino.h

@@ -0,0 +1,29 @@
+/*
+ * avrdude - A Downloader/Uploader for AVR device programmers
+ * Copyright (C) 2009 Lars Immisch
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* $Id$ */
+
+#ifndef arduino_h__
+#define arduino_h__
+
+void arduino_initpgm (PROGRAMMER * pgm);
+
+#endif
+
+

avrdude.1

@@ -107,6 +107,9 @@ Using firmware version 2, high-voltage programming is also supported,
 both parallel and serial
 (programmer types stk500pp and stk500hvsp).
 .Pp
+The Arduino (which is very similar to the STK500 1.x) is supported via
+its own programmer type specification ``arduino''.
+.Pp
 Atmel's STK600 programmer is supported in ISP and high-voltage
 programming modes, and connects through the USB.
 For ATxmega devices, the STK600 is supported in PDI mode.
@@ -203,6 +206,7 @@ m103	ATmega103
 m128	ATmega128
 m1280	ATmega1280
 m1281	ATmega1281
+m1284p	ATmega1284P
 m128rfa1	ATmega128RFA1
 m16	ATmega16
 m161	ATmega161

avrdude.conf.in

@@ -20,7 +20,7 @@
 #                  avr910 | butterfly | usbasp |
 #                  jtagmki | jtagmkii | jtagmkii_isp | jtagmkii_dw |
 #                  dragon_dw | dragon_jtag | dragon_isp | dragon_pp |
-#                  dragon_hvsp; # programmer type
+#                  dragon_hvsp | arduino; # programmer type
 #       baudrate = <num> ;                          # baudrate for avr910-programmer
 #       vcc      = <num1> [, <num2> ... ] ;         # pin number(s)
 #       reset    = <num> ;                          # pin number
@@ -310,6 +310,12 @@ default_serial     = "@DEFAULT_SER_PORT@";
 # PROGRAMMER DEFINITIONS
 #
 
+programmer
+  id    = "arduino";
+  desc  = "Arduino";
+  type  = arduino;
+;
+
 programmer
   id    = "avrisp";
   desc  = "Atmel AVR ISP";

config_gram.y

@@ -37,6 +37,7 @@
 #include "ppi.h"
 #include "pgm.h"
 #include "stk500.h"
+#include "arduino.h"
 #include "stk500v2.h"
 #include "stk500generic.h"
 #include "avr910.h"
@@ -79,6 +80,7 @@ static int parse_cmdbits(OPCODE * op);
 %token K_PAGE_SIZE
 %token K_PAGED
 
+%token K_ARDUINO
 %token K_BAUDRATE
 %token K_BS2
 %token K_BUFF
@@ -417,6 +419,12 @@ prog_parm :
     }
   } |
 
+  K_TYPE TKN_EQUAL K_ARDUINO {
+    { 
+      arduino_initpgm(current_prog);
+    }
+  } |
+
   K_TYPE TKN_EQUAL K_STK600 {
     {
       stk600_initpgm(current_prog);

doc/avrdude.texi

@@ -190,6 +190,9 @@ by AVRDUDE.
 For the JTAG ICE mkII, JTAG, debugWire and ISP mode are supported.
 See below for the limitations of debugWire.
 
+The Arduino (which is very similar to the STK500 1.x) is supported via
+its own programmer type specification ``arduino''.
+
 The AVR Dragon is supported in all modes (ISP, JTAG, HVSP, PP, debugWire).
 When used in JTAG and debugWire mode, the AVR Dragon behaves similar to a
 JTAG ICE mkII, so all device-specific comments for that device
@@ -297,6 +300,7 @@ Currently, the following MCU types are understood:
 @item @code{m128}  @tab ATmega128
 @item @code{m1280} @tab ATmega1280
 @item @code{m1281} @tab ATmega1281
+@item @code{m1284p} @tab ATmega1284P
 @item @code{m128rfa1} @tab ATmega128RFA1
 @item @code{m16}   @tab ATmega16
 @item @code{m161}  @tab ATmega161
@@ -371,6 +375,8 @@ ABCmini Board, aka Dick Smith HOTCHIP
 @item @code{alf}         @tab
 Nightshade ALF-PgmAVR,@*
 @url{http://nightshade.homeip.net/}
+@item @code{arduino}
+Arduino board, protocol similar to STK500 1.x
 @item @code{atisp}       @tab
 AT-ISP V1.1 programming cable for AVR-SDK1 from,@*
 @url{http://micro-research.co.th/}

lexer.l

@@ -117,6 +117,7 @@ SIGN     [+-]
             exit(1); }
 
 allowfullpagebitstream { yylval=NULL; return K_ALLOWFULLPAGEBITSTREAM; }
+arduino          { yylval=NULL; return K_ARDUINO; }
 avr910           { yylval=NULL; return K_AVR910; }
 avr910_devcode   { yylval=NULL; return K_AVR910_DEVCODE; }
 usbasp           { yylval=NULL; return K_USBASP; }