Document the JTAG ICE mkI support.

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@559 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
joerg_wunsch 2005-11-29 22:58:04 +00:00
parent a3fe61cb2a
commit f2cf2650da
4 changed files with 41 additions and 9 deletions

View File

@ -1,3 +1,8 @@
2005-11-29 Joerg Wunsch <j@uriah.heep.sax.de>
* avrdude.1: update for JTAG ICE mkI support.
* doc/avrdude.texi: (Ditto.)
2005-11-29 Joerg Wunsch <j@uriah.heep.sax.de> 2005-11-29 Joerg Wunsch <j@uriah.heep.sax.de>
Submitted by Galen Seitz: Submitted by Galen Seitz:

5
NEWS
View File

@ -13,6 +13,11 @@ Current:
* JTAG mkII support now works with libusb-win32, too * JTAG mkII support now works with libusb-win32, too
* JTAG ICE mkI support has been added
* Solaris support has been added (including ecpp(7D) parallel-port
bit-bang mode)
Version 5.0: Version 5.0:

View File

@ -19,7 +19,7 @@
.\" .\"
.\" $Id$ .\" $Id$
.\" .\"
.Dd DATE September 18, 2005 .Dd DATE November 29, 2005
.Os .Os
.Dt AVRDUDE 1 .Dt AVRDUDE 1
.Sh NAME .Sh NAME
@ -55,7 +55,7 @@ is a program for downloading code and data to Atmel AVR
microcontrollers. microcontrollers.
.Nm Avrdude .Nm Avrdude
supports Atmel's STK500 programmer, supports Atmel's STK500 programmer,
Atmel's JTAG ICE mkII, Atmel's JTAG ICE (both mkI and mkII),
programmers complying to AppNote AVR910 and AVR109 (including the Butterfly), programmers complying to AppNote AVR910 and AVR109 (including the Butterfly),
as well as a simple hard-wired as well as a simple hard-wired
programmer connected directly to a programmer connected directly to a
@ -104,7 +104,7 @@ AVR910, and the bootloader described in Atmel's application note
AVR109 (which is also used by the AVR Butterfly evaluation board), are AVR109 (which is also used by the AVR Butterfly evaluation board), are
supported on a serial port. supported on a serial port.
.Pp .Pp
Atmel's JTAG ICE mkII is supported as well to up- or download memory Atmel's JTAG ICE (both mkI and mkII) is supported as well to up- or download memory
areas from/to an AVR target (no support for on-chip debugging). areas from/to an AVR target (no support for on-chip debugging).
.Pp .Pp
Input files can be provided, and output files can be written in Input files can be provided, and output files can be written in
@ -643,14 +643,19 @@ This man page by
Please report bugs via Please report bugs via
.Dl "http://savannah.nongnu.org/bugs/?group=avrdude" . .Dl "http://savannah.nongnu.org/bugs/?group=avrdude" .
.Pp .Pp
The JTAGICE mkII programmer currently cannot write to the flash ROM The JTAG ICE programmers currently cannot write to the flash ROM
one byte at a time. one byte at a time.
For that reason, updating the flash ROM from terminal mode does not For that reason, updating the flash ROM from terminal mode does not
work. work.
.Pp .Pp
Page-mode programming the EEPROM through JTAG (i.e. through an
.Fl U
option) requires a prior chip erase.
This is an inherent feature of the way JTAG EEPROM programming works.
.Pp
The device IDs used by AVR910 and AVR109 do not match, so the The device IDs used by AVR910 and AVR109 do not match, so the
avr109 (aka. butterfly) programmer might report avr109 (aka. butterfly) programmer might report
.Dl "selected device is not supported by programmer" . .Dl "selected device is not supported by programmer" .
Use the -F option to force Use the -F option to force
.Nm .Nm
to contiue anway. to contiue anyway.

View File

@ -136,7 +136,7 @@ exploring memory contents, modifing individual bytes of eeprom,
programming fuse/lock bits, etc. programming fuse/lock bits, etc.
AVRDUDE supports six basic programmer types: Atmel's STK500, AVRDUDE supports six basic programmer types: Atmel's STK500,
Atmel's JTAG ICE mkII, appnote Atmel's JTAG ICE (both mkI and mkII), appnote
avr910, appnote avr109 (including the AVR Butterfly), avr910, appnote avr109 (including the AVR Butterfly),
serial bit-bang adapters, serial bit-bang adapters,
and the PPI (parallel port interface). PPI represents a class and the PPI (parallel port interface). PPI represents a class
@ -172,7 +172,7 @@ The JTAG ICE also uses a serial communication protocol which is similar
to the STK500 firmware version 2 one. However, as the JTAG ICE is to the STK500 firmware version 2 one. However, as the JTAG ICE is
intented to allow on-chip debugging as well as memory programming, the intented to allow on-chip debugging as well as memory programming, the
protocol is more sophisticated. protocol is more sophisticated.
(This protocol can also be run on top of USB.) (The JTAG ICE mkII protocol can also be run on top of USB.)
Only the memory programming functionality of the JTAG ICE is supported Only the memory programming functionality of the JTAG ICE is supported
by AVRDUDE. by AVRDUDE.
@ -444,6 +444,13 @@ Atmel Butterfly Development Board
@itemx dt006 @itemx dt006
Dontronics DT006 Dontronics DT006
@item jtagmkI
@itemx jtag1
Atmel JTAG ICE mkI, running at 115200 Bd
@itemx jtag1slow
Atmel JTAG ICE mkI, running at 19200 Bd
@item jtagmkII @item jtagmkII
@itemx jtag2slow @itemx jtag2slow
Atmel JTAG ICE mkII (default speed 19200 Bd) Atmel JTAG ICE mkII (default speed 19200 Bd)
@ -1842,11 +1849,21 @@ Use the -F option to force AVRDUDE to continue anyway.
@item @item
Problem: Updating the flash ROM from terminal mode does not work with the Problem: Updating the flash ROM from terminal mode does not work with the
JTAG ICE mkII. JTAG ICEs.
Solution: None at this time. Currently, the JTAG ICE mkII code cannot Solution: None at this time. Currently, the JTAG ICE code cannot
write to the flash ROM one byte at a time. write to the flash ROM one byte at a time.
@item
Problem: Page-mode programming the EEPROM (using the -U option) does
not erase EEPROM cells before writing, and thus cannot overwrite any
previous value != 0xff.
Solution: None. This is an inherent feature of the way JTAG EEPROM
programming works, and is documented that way in the Atmel AVR
datasheets.
In order to successfully program the EEPROM that way, a prior chip
erase (with the EESAVE fuse unprogrammed) is required.
@end itemize @end itemize