avrftdi: Change to new 0-based pin definitions

avrdude.conf.in: Change all programmers' pin definitions to 0-based
avrftdi.c: incorporate new 0-based pindef infrastructure
avrftdi_private.h: Add pin_checklist_t to avrftdi_t for runtime pin
checking in pgm->setpin.

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1164 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
hweisbach 2013-05-06 11:48:15 +00:00
parent c8d3302128
commit ec6278b5a8
4 changed files with 169 additions and 340 deletions

View File

@ -2,8 +2,12 @@
* avrftdi_tpi.c: instead of private set_pin() function pointer use the one
declared in struct PROGRAMMER.
* avrftdi_private.h: remove set_pin function pointer
* avrftdi_private.h: remove set_pin function pointer. Add pin_checklist_t
member to check pgm->setpin calls during runtime.
* avrftdi.c: remove set_pin function pointer init, add pgm->setpin init.
Convert avrftdi to new 0-based pindefs infrastructure.
* avrdude.conf.in: Change all avrftdi-based programmers' pin definitions to
0-based.
2013-05-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de>

View File

@ -384,17 +384,17 @@ programmer
usbdev = "A";
usbsn = "";
#ISP-signals - lower ADBUS-Nibble (default)
reset = 4;
sck = 1;
mosi = 2;
miso = 3;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
#LED SIGNALs - higher ADBUS-Nibble
# errled = 5;
# rdyled = 6;
# pgmled = 7;
# vfyled = 8;
# errled = 4;
# rdyled = 5;
# pgmled = 6;
# vfyled = 7;
#Buffer Signal - ACBUS - Nibble
# buff = 9;
# buff = 8;
;
# This is an implementation of the above with a buffer IC (74AC244) and
# 4 LEDs directly attached, active low. The buff and reset pins are
@ -415,16 +415,16 @@ programmer
usbproduct = "";
usbsn = "";
#ISP-signals
reset = 4;
sck = 1;
mosi = 2;
miso = 3;
buff = 5;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
buff = 4;
#LED SIGNALs
errled = ~ 12;
rdyled = ~ 15;
pgmled = ~ 14;
vfyled = ~ 13;
errled = ~ 11;
rdyled = ~ 14;
pgmled = ~ 13;
vfyled = ~ 12;
;
#The FT4232H can be treated as FT2232H, but it has a different USB
@ -448,11 +448,11 @@ programmer
usbproduct = "";
usbsn = "";
#ISP-signals => 20 - Pin connector on JTAGKey
reset = 4; # TMS 7 violet
sck = 1; # TCK 9 white
mosi = 2; # TDI 5 green
miso = 3; # TDO 13 orange
buff = 5;
reset = 3; # TMS 7 violet
sck = 0; # TCK 9 white
mosi = 1; # TDI 5 green
miso = 2; # TDO 13 orange
buff = 4;
# VTG VREF 1 brown with red tip
# GND GND 20 black
# The colors are on the 20 pin breakout cable
@ -492,10 +492,10 @@ programmer
usbvendor = "";
usbproduct = "";
usbsn = "";
reset = 4; # TMS 7
sck = 1; # TCK 9
mosi = 2; # TDI 5
miso = 3; # TDO 13
reset = 3; # TMS 7
sck = 0; # TCK 9
mosi = 1; # TDI 5
miso = 2; # TDO 13
;
# Only Rev. A boards.
@ -512,12 +512,12 @@ programmer
usbdev = "A";
usbsn = "";
#ISP-signals - lower ACBUS-Nibble (default)
reset = 4;
sck = 1;
mosi = 2;
miso = 3;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
# Enable correct buffers
buff = ~8;
buff = ~7;
;
programmer

434
avrftdi.c
View File

@ -36,6 +36,7 @@
#include "avrdude.h"
#include "avr.h"
#include "pgm.h"
#include "pindefs.h"
#include "avrftdi.h"
#include "avrpart.h"
#include "avrftdi_tpi.h"
@ -47,9 +48,7 @@
#include <libusb-1.0/libusb.h>
#include <libftdi1/ftdi.h>
enum { FTDI_SCK = 1, FTDI_MOSI, FTDI_MISO, FTDI_RESET };
#define FTDI_DEFAULT_MASK ( (1 << (FTDI_SCK - 1)) | (1 << (FTDI_MOSI - 1)) )
enum { FTDI_SCK = 0, FTDI_MOSI, FTDI_MISO, FTDI_RESET };
/* This is for running the code without having a FTDI-device.
* The generated code is useless! For debugging purposes only.
@ -66,12 +65,11 @@ static int write_flush(avrftdi_t *);
* the pin names used in FTDI datasheets.
*/
static char*
ftdi_pin_name(avrftdi_t* pdata, int pin)
ftdi_pin_name(avrftdi_t* pdata, struct pindef_t pin)
{
static char pin_name[16];
static char str[128];
char interface = '@';
char port;
/* INTERFACE_ANY is zero, so @ is used
* INTERFACE_A is one, so '@' + 1 = 'A'
@ -81,17 +79,39 @@ ftdi_pin_name(avrftdi_t* pdata, int pin)
*/
interface += pdata->ftdic->index;
/* This is FTDI's naming scheme.
* probably 'D' is for data and 'C' for control
*/
if(pin <= 8)
port = 'D';
else
port = 'C';
int pinno;
int n = 0;
int mask = pin.mask[0];
snprintf(pin_name, sizeof(pin_name), "%c%cBUS%d", interface, port, pin-1);
const char * fmt;
return pin_name;
str[0] = 0;
for(pinno = 0; mask; mask >>= 1, pinno++) {
if(!(mask & 1))
continue;
int chars = 0;
char port;
/* This is FTDI's naming scheme.
* probably 'D' is for data and 'C' for control
*/
if(pinno < 8)
port = 'D';
else
port = 'C';
if(str[0] == 0)
fmt = "%c%cBUS%d%n";
else
fmt = ", %c%cBUS%d%n";
snprintf(&str[n], sizeof(str) - n, fmt, interface, port, pinno, &chars);
n += chars;
}
return str;
}
/*
@ -191,167 +211,6 @@ static int set_frequency(avrftdi_t* ftdi, uint32_t freq)
return 0;
}
/*
* Adds a single pin to the direction mask and sets the pin state inactive in
* the value mask. the value of 'inactive' is chosen according to the pin
* configuration (high or low active).
*/
static int add_pin(PROGRAMMER *pgm, int pinfunc)
{
int pin, pin_mask, inverted, fail;
avrftdi_t* pdata = to_pdata(pgm);
fail = 0;
pin = pgm->pinno[pinfunc] & PIN_MASK;
inverted = pgm->pinno[pinfunc] & PIN_INVERSE;
pin_mask = (1 << (pin - 1));
/* not configured */
if(!pin)
{
log_warn("Pin %s not configured\n", avr_pin_name(pinfunc));
return 0;
}
/* check that the pin number is in range */
if (pin > pdata->pin_limit)
{
log_warn("Invalid pin definition for pin %s.\n", avr_pin_name(pinfunc));
log_warn("Configured as pin %d, but highest pin is %d.\n",
pin, pdata->pin_limit);
fail = 1;
}
/* check if the pin is still available */
if (pdata->pin_direction & pin_mask)
{
log_warn("Pin %d (%s) is used twice. The second use is %s.\n",
pin, ftdi_pin_name(pdata, pin), avr_pin_name(pinfunc));
fail = 1;
}
/*
* No need to fail for a wrongly configured led.
* MISO, MOSI and SCK are fixed and correctly set during setup.
* Maybe we should fail for wrongly configured VCC or BUFF pins?
*/
if(fail)
{
if(pinfunc == PIN_AVR_RESET)
{
log_err("Aborting, since the reset pin is wrongly configured\n");
return -1;
}
else
{
log_warn("Ignoring wrongly configured pin.\n");
return 0;
}
}
/* all checks passed - do actual work */
log_info("Configure pin %d (%s) as %s (%s active)\n", pin,
ftdi_pin_name(pdata, pin), avr_pin_name(pinfunc),
(inverted) ? "low": "high");
{
/* create mask */
pdata->pin_direction |= pin_mask;
/* and set default value */
if(inverted)
pdata->pin_value |= pin_mask;
else
pdata->pin_value &= ~(pin_mask);
}
if(PIN_LED_ERR == pinfunc ||
PIN_LED_VFY == pinfunc ||
PIN_LED_RDY == pinfunc ||
PIN_LED_PGM == pinfunc) {
pdata->led_mask |= pin_mask;
}
return 0;
}
/*
* Add pins by pin mask
* Check an entire mask for correctness and plausibility. Performed checks are
* the pin number is lower that the total number of pins and the pin is not
* configured yet.
* If at least one test fails, the entire mask is discarded.
* These basic tests could possibly moved to avrdude core, since it does not
* contain any tests (as far as I can tell).
*/
static int add_pins(PROGRAMMER *pgm, int pinfunc)
{
int pin, inverted;
uint32_t pin_mask, pin_bit;
avrftdi_t* pdata = to_pdata(pgm);
pin_mask = (pgm->pinno[pinfunc] & PIN_MASK) >> 1;
/* FIXME: I think you cannot inverse these multi-pin options */
inverted = pgm->pinno[pinfunc] & PIN_INVERSE;
if(!pin_mask)
{
log_warn("Pins for %s not configured.\n", avr_pin_name(pinfunc));
return 0;
}
/* check every configured pin */
for(pin = 0; (1 << pin) & (PIN_MASK); pin++)
{
pin_bit = 1 << pin;
/* skip, if this pin is not in the mask to be configured */
if(!(pin_bit & pin_mask))
continue;
/* 0 is not a valid pin, see above, we use 1 << (pin - 1) to create pin_bit */
if(pin + 1 > pdata->pin_limit)
{
log_warn("Invalid pin definition for pin %s.\n", avr_pin_name(pinfunc));
log_warn("Configured as pin %d, but highest pin is %d.\n", pin + 1,
pdata->pin_limit);
log_warn("Ignoring wrongly configured pins.\n");
}
if(pin_bit & pdata->pin_direction)
{
log_warn("Failure: pin %d (%s) is used twice. The second use is %s.\n",
pin, ftdi_pin_name(pdata, pin), avr_pin_name(pinfunc));
log_warn("Ignoring wrongly configured pins.\n");
}
}
/* conditional output */
for(pin = 0; (1 << pin) & (PIN_MASK); pin++)
{
pin_bit = 1 << pin;
/* skip if pin is not set */
if(!(pin_bit & pin_mask))
continue;
/* remember, we count from 1, not 0 */
log_info("Configured pin %d (%s) as %s (%s active)\n", pin + 1,
ftdi_pin_name(pdata, pin+1), avr_pin_name(pinfunc),
(inverted) ? "low": "high");
}
/* do the work */
pdata->pin_direction |= (uint16_t)pin_mask;
if(inverted)
pdata->pin_value |= pin_mask;
else
pdata->pin_value &= ~pin_mask;
return 0;
}
/*
* This function sets or clears any pin, except SCK, MISO and MOSI. Depending
* on the pin configuration, a non-zero value sets the pin in the 'active'
@ -362,91 +221,25 @@ static int add_pins(PROGRAMMER *pgm, int pinfunc)
*/
static int set_pin(PROGRAMMER * pgm, int pinfunc, int value)
{
int pin, pin_mask;
int inverted;
avrftdi_t* pdata = to_pdata(pgm);
struct pindef_t pin = pgm->pin[pinfunc];
pin = pgm->pinno[pinfunc] & PIN_MASK;
inverted = pgm->pinno[pinfunc] & PIN_INVERSE;
pin_mask = 1 << (pin - 1);
/* make value 0 or 1 and invert, if necessary */
value = (inverted) ? !value : !!value;
if (!pin) {
if (pins_check(pgm, pdata->pin_checklist, N_PINS - 1)) {
/* this error message is really annoying, maybe use a ratelimit? */
/*
avrftdi_print(2, "%s info: Pin is zero, value: %d!\n",
progname, value);
*/
return 1;
}
if (value)
value = pin_mask;
log_debug("Setting pin %s (%s) as %s: %s (%s active)\n",
pinmask_to_str(pin.mask), ftdi_pin_name(pdata, pin),
avr_pin_name(pinfunc),
(value) ? "high" : "low", (pin.inverse[0]) ? "low" : "high");
log_debug("Setting pin %d (%s) as %s: %s (%s active)\n", pin,
ftdi_pin_name(pdata, pin), avr_pin_name(pinfunc),
(value) ? "high" : "low", (inverted) ? "low" : "high");
/* set bits depending on value */
//tval = (pdata->pin_value & (~pin_mask)) | pin_mask;
pdata->pin_value ^= (-value ^ pdata->pin_value) & pin_mask;
//fprintf(stderr, "%x %x\n", tval, pdata->pin_value);
return write_flush(pdata);
}
/*
* This function sets or clears a group of pins - VCC or BUFF.
* the semantics are the same as for single pins, described above.
*/
static int set_pins(PROGRAMMER * pgm, int pinfunc, int value)
{
int pin, pin_mask;
int inverted;
int pin_bit;
avrftdi_t* pdata = to_pdata(pgm);
pin = pgm->pinno[pinfunc] & PIN_MASK;
inverted = pgm->pinno[pinfunc] & PIN_INVERSE;
pin_mask = pin >> 1;
value = (inverted) ? !value : !!value;
if (!pin) {
/* dito above */
return 1;
}
if(value)
value = pin_mask;
/* conditional output */
for(pin = 0; (1 << pin) & (PIN_MASK); pin++)
{
pin_bit = 1 << pin;
/* skip if pin is not set */
if(!(pin_bit & pin_mask))
continue;
/* remember, we count from 1, not 0 */
log_debug("Setting pin %d (%s) as %s: %s (%s active)\n", pin + 1,
ftdi_pin_name(pdata, pin+1), avr_pin_name(pinfunc),
(value) ? "high" : "low", (inverted) ? "low": "high");
}
/* set bits depending on value */
/*pin_value ^= (-value ^ pin_value) & (1 << (pin - 1)); */
pdata->pin_value ^= (-value ^ pdata->pin_value) & pin_mask;
/*pdata->pin_value = (pdata->pin_value & (~pin_mask)) | value;*/
pdata->pin_value = SET_BITS_0(pdata->pin_value, pgm, pinfunc, value);
return write_flush(pdata);
}
@ -656,6 +449,83 @@ static int write_flush(avrftdi_t* pdata)
}
static int avrftdi_pin_setup(PROGRAMMER * pgm)
{
/*************
* pin setup *
*************/
int pin;
avrftdi_t* pdata = to_pdata(pgm);
/* SCK/MOSI/MISO are fixed and not invertable?*/
/* TODO: inverted SCK/MISO/MOSI */
static const struct pindef_t valid_pins_SCK = {{0x01},{0x00}} ;
static const struct pindef_t valid_pins_MOSI = {{0x02},{0x00}} ;
static const struct pindef_t valid_pins_MISO = {{0x04},{0x00}} ;
/* value for 8/12/16 bit wide interface for other pins */
int valid_mask = ((1 << pdata->pin_limit) - 1);
/* mask out SCK/MISO/MOSI */
valid_mask &= ~((1 << FTDI_SCK) | (1 << FTDI_MOSI) | (1 << FTDI_MISO));
log_debug("Using valid mask: 0x%08x\n", valid_mask);
static struct pindef_t valid_pins_others;
valid_pins_others.mask[0] = valid_mask;
valid_pins_others.inverse[0] = valid_mask ;
/* build pin checklist */
for(pin = PPI_AVR_VCC; pin < N_PINS; ++pin) {
/* unfortunately, the pin name enum is one-based */
pdata->pin_checklist[pin - 1].pinname = pin;
pdata->pin_checklist[pin - 1].mandatory = 0;
pdata->pin_checklist[pin - 1].valid_pins = &valid_pins_others;
}
pdata->pin_checklist[PIN_AVR_SCK - 1].mandatory = 1;
pdata->pin_checklist[PIN_AVR_SCK - 1].valid_pins = &valid_pins_SCK;
pdata->pin_checklist[PIN_AVR_MOSI - 1].mandatory = 1;
pdata->pin_checklist[PIN_AVR_MOSI - 1].valid_pins = &valid_pins_MOSI;
pdata->pin_checklist[PIN_AVR_MISO - 1].mandatory = 1;
pdata->pin_checklist[PIN_AVR_MISO - 1].valid_pins = &valid_pins_MISO;
/* everything is an output, except MISO */
for(pin = PPI_AVR_VCC; pin < N_PINS; ++pin) {
pdata->pin_direction |= pgm->pin[pin].mask[0];
pdata->pin_value = SET_BITS_0(pdata->pin_value, pgm, pin, OFF);
}
pdata->pin_direction &= ~pgm->pin[PIN_AVR_MISO].mask[0];
for(pin = PIN_LED_ERR; pin < N_PINS; ++pin) {
pdata->led_mask |= pgm->pin[pin].mask[0];
}
/* assumes all checklists above have same number of entries */
if (pins_check(pgm, pdata->pin_checklist,N_PINS - 1)) {
log_err("Pin configuration for FTDI MPSSE must be:\n");
log_err("%s: 0, %s: 1, %s: 2 (is: %s, %s, %s)\n", avr_pin_name(PIN_AVR_SCK),
avr_pin_name(PIN_AVR_MOSI), avr_pin_name(PIN_AVR_MISO),
pins_to_str(&pgm->pin[PIN_AVR_SCK]),
pins_to_str(&pgm->pin[PIN_AVR_MOSI]),
pins_to_str(&pgm->pin[PIN_AVR_MISO]));
log_err("Please correct your cabling and/or configuration.\n");
log_err("If your hardware is fixed, consider using a bitbang programmer.\n");
return -1;
}
/*
* TODO: No need to fail for a wrongly configured led or something.
* Maybe we should only fail for SCK; MISO, MOSI, RST (and probably
* VCC and BUFF).
*/
log_info("Pin direction mask: %04x\n", pdata->pin_direction);
log_info("Pin value mask: %04x\n", pdata->pin_value);
return 0;
}
static int avrftdi_open(PROGRAMMER * pgm, char *port)
{
@ -743,38 +613,6 @@ static int avrftdi_open(PROGRAMMER * pgm, char *port)
set_frequency(pdata, pgm->baudrate ? pgm->baudrate : 150000);
}
/*************
* pin setup *
*************/
if ( FTDI_SCK != pgm->pinno[PIN_AVR_SCK]
|| FTDI_MOSI != pgm->pinno[PIN_AVR_MOSI]
|| FTDI_MISO != pgm->pinno[PIN_AVR_MISO])
{
log_warn("Pin configuration for FTDI MPSSE must be:\n");
log_warn("%s: 1, %s: 2, %s: 3(is: %d,%d,%d)\n", avr_pin_name(PIN_AVR_SCK),
avr_pin_name(PIN_AVR_MOSI), avr_pin_name(PIN_AVR_MISO),
pgm->pinno[PIN_AVR_SCK], pgm->pinno[PIN_AVR_MOSI],
pgm->pinno[PIN_AVR_MISO]);
log_warn("Setting pins accordingly ...\n");
pgm->pinno[PIN_AVR_SCK] = FTDI_SCK;
pgm->pinno[PIN_AVR_MOSI] = FTDI_MOSI;
pgm->pinno[PIN_AVR_MISO] = FTDI_MISO;
}
log_info("RESET pin value: %x\n", pgm->pinno[PIN_AVR_RESET]-1);
if ( pgm->pinno[PIN_AVR_RESET] < FTDI_RESET
|| pgm->pinno[PIN_AVR_RESET] == 0)
{
log_warn("RESET pin clashes with data pin or is not set.\n");
log_warn("Setting to default-value 4\n");
pgm->pinno[PIN_AVR_RESET] = FTDI_RESET;
}
//pdata->pin_direction = (0x3 | (1 << (pgm->pinno[PIN_AVR_RESET] - 1)));
/* set pin limit depending on chip type */
switch(pdata->ftdic->type) {
case TYPE_AM:
@ -784,44 +622,30 @@ static int avrftdi_open(PROGRAMMER * pgm, char *port)
log_err("cannot work with your chip. Try the 'synbb' programmer.\n");
return -1;
case TYPE_2232C:
pdata->pin_limit = 11;
pdata->pin_limit = 12;
pdata->rx_buffer_size = 384;
break;
case TYPE_2232H:
pdata->pin_limit = 15;
pdata->pin_limit = 16;
pdata->rx_buffer_size = 4096;
break;
case TYPE_232H:
pdata->pin_limit = 15;
pdata->pin_limit = 16;
pdata->rx_buffer_size = 1024;
break;
case TYPE_4232H:
pdata->pin_limit = 7;
pdata->pin_limit = 8;
pdata->rx_buffer_size = 2048;
break;
default:
log_warn("Found unkown device %x. I will do my ", pdata->ftdic->type);
log_warn("best to work with it, but no guarantees ...\n");
pdata->pin_limit = 7;
pdata->pin_limit = 8;
pdata->rx_buffer_size = pdata->ftdic->max_packet_size;
break;
}
/* add SCK, MOSI and RESET as output pins - MISO needs no configuration */
if (add_pin(pgm, PIN_AVR_SCK)) return -1;
if (add_pin(pgm, PIN_AVR_MOSI)) return -1;
if (add_pin(pgm, PIN_AVR_RESET)) return -1;
/* gather the rest of the pins */
if (add_pins(pgm, PPI_AVR_VCC)) return -1;
if (add_pins(pgm, PPI_AVR_BUFF)) return -1;
if (add_pin(pgm, PIN_LED_ERR)) return -1;
if (add_pin(pgm, PIN_LED_RDY)) return -1;
if (add_pin(pgm, PIN_LED_PGM)) return -1;
if (add_pin(pgm, PIN_LED_VFY)) return -1;
log_info("Pin direction mask: %04x\n", pdata->pin_direction);
log_info("Pin value mask: %04x\n", pdata->pin_value);
avrftdi_pin_setup(pgm);
/**********************************************
* set the ready LED and set our direction up *
@ -838,7 +662,7 @@ static void avrftdi_close(PROGRAMMER * pgm)
avrftdi_t* pdata = to_pdata(pgm);
if(pdata->ftdic->usb_dev) {
set_pins(pgm, PPI_AVR_BUFF, ON);
set_pin(pgm, PPI_AVR_BUFF, ON);
set_pin(pgm, PIN_AVR_RESET, ON);
/* Stop driving the pins - except for the LEDs */
@ -868,7 +692,7 @@ static int avrftdi_initialize(PROGRAMMER * pgm, AVRPART * p)
else
{
set_pin(pgm, PIN_AVR_RESET, OFF);
set_pins(pgm, PPI_AVR_BUFF, OFF);
set_pin(pgm, PPI_AVR_BUFF, OFF);
set_pin(pgm, PIN_AVR_SCK, OFF);
/*use speed optimization with CAUTION*/
usleep(20 * 1000);
@ -1298,8 +1122,6 @@ void avrftdi_initpgm(PROGRAMMER * pgm)
strcpy(pgm->type, "avrftdi");
pgm_fill_old_pins(pgm); // TODO to be removed if old pin data no longer needed
/*
* mandatory functions
*/

View File

@ -10,6 +10,7 @@
#include <libftdi1/ftdi.h>
#include "pgm.h"
#include "pindefs.h"
enum { ERR, WARN, INFO, DEBUG, TRACE };
@ -64,6 +65,8 @@ typedef struct avrftdi_s {
int pin_limit;
/* internal RX buffer of the device. needed for INOUT transfers */
int rx_buffer_size;
/* pin checklist. */
struct pin_checklist_t pin_checklist[N_PINS - 1];
} avrftdi_t;
void avrftdi_log(int level, const char * func, int line, const char * fmt, ...);