The STK500 can perform paged read/write operations even on standard

"non-paged" parts.  Take advantage of that and use the faster internal
routines of the STK500 for those parts as well.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@162 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
bsd 2002-12-01 15:05:56 +00:00
parent b3cc1535b6
commit e722fbc587
5 changed files with 124 additions and 89 deletions

34
avr.c
View File

@ -374,12 +374,20 @@ int avr_read(PROGRAMMER * pgm, AVRPART * p, char * memtype, int size,
size = mem->size;
}
if (mem->paged && pgm->paged_load != NULL) {
if ((strcmp(mem->desc, "flash")==0) || (strcmp(mem->desc, "eeprom")==0)) {
if (pgm->paged_load != NULL) {
/*
* the programmer directly supports writing this memory, perhaps
* more efficiently than we can from here
* the programmer supports a paged mode read, perhaps more
* efficiently than we can read it directly, so use its routine
* instead
*/
return pgm->paged_load(pgm, p, mem, size);
if (mem->paged) {
return pgm->paged_load(pgm, p, mem, mem->page_size, size);
}
else {
return pgm->paged_load(pgm, p, mem, pgm->page_size, size);
}
}
}
@ -434,7 +442,7 @@ int avr_write_page(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
* if this memory is word-addressable, adjust the address
* accordingly
*/
if (mem->op[AVR_OP_LOADPAGE_LO])
if ((mem->op[AVR_OP_LOADPAGE_LO]) || (mem->op[AVR_OP_READ_LO]))
addr = addr / 2;
pgm->pgm_led(pgm, ON);
@ -674,12 +682,20 @@ int avr_write(PROGRAMMER * pgm, AVRPART * p, char * memtype, int size,
pgm->err_led(pgm, OFF);
if (m->paged && pgm->paged_write != NULL) {
if ((strcmp(m->desc, "flash")==0) || (strcmp(m->desc, "eeprom")==0)) {
if (pgm->paged_write != NULL) {
/*
* the programmer directly supports writing this memory, perhaps
* more efficiently than we can from here
* the programmer supports a paged mode write, perhaps more
* efficiently than we can read it directly, so use its routine
* instead
*/
return pgm->paged_write(pgm, p, m, size);
if (m->paged) {
return pgm->paged_write(pgm, p, m, m->page_size, size);
}
else {
return pgm->paged_write(pgm, p, m, pgm->page_size, size);
}
}
}
printed = 0;

View File

@ -15,6 +15,7 @@
# programmer
# id = <id1> [, <id2> [, <id3>] ...] ; # <idN> are quoted strings
# desc = <description> ; # quoted string
# type = ppi | stk500 ; # programmer type
# vcc = <num1> [, <num2> ... ] ; # pin number(s)
# reset = <num> ; # pin number
# sck = <num> ; # pin number
@ -29,6 +30,7 @@
# part
# id = <id> ; # quoted string
# desc = <description> ; # quoted string
# devicecode = <num> ; # numeric
# chip_erase_delay = <num> ; # micro-seconds
# pgm_enable = <instruction format> ;
# chip_erase = <instruction format> ;
@ -60,6 +62,8 @@
# complain.
#
# NOTES:
# * 'devicecode' is the device code used by the STK500 (see codes
# listed below)
# * Not all memory types will implement all instructions.
# * AVR Fuse bits and Lock bits are implemented as a type of memory.
# * Example memory types are:
@ -106,6 +110,64 @@
#
# See below for some examples.
#
#
# The following are STK500 part device codes to use for the
# "devicecode" field of the part. These came from Atmel's software
# section avr061.zip which accompanies the application note
# AVR061 available from:
#
# http://www.atmel.com/atmel/acrobat/doc2525.pdf
#
#define ATTINY10 0x10
#define ATTINY11 0x11
#define ATTINY12 0x12
#define ATTINY22 0x20
#define ATTINY26 0x21
#define ATTINY28 0x22
#define AT90S1200 0x33
#define AT90S2313 0x40
#define AT90S2323 0x41
#define AT90S2333 0x42
#define AT90S2343 0x43
#define AT90S4414 0x50
#define AT90S4433 0x51
#define AT90S4434 0x52
#define AT90S8515 0x60
#define AT90S8535 0x61
#define AT90C8534 0x62
#define ATMEGA8515 0x63
#define ATMEGA8535 0x64
#define ATMEGA8 0x70
#define ATMEGA161 0x80
#define ATMEGA163 0x81
#define ATMEGA16 0x82
#define ATMEGA162 0x83
#define ATMEGA169 0x84
#define ATMEGA323 0x90
#define ATMEGA32 0x91
#define ATMEGA103 0xB1
#define ATMEGA128 0xB2
#define AT86RF401 0xD0
#define AT89START 0xE0
#define AT89S51 0xE0
#define AT89S52 0xE1
#
# PROGRAMMER DEFINITIONS
#
programmer
id = "bsd", "default";
@ -165,55 +227,9 @@ programmer
#define ATTINY10 0x10
#define ATTINY11 0x11
#define ATTINY12 0x12
#define ATTINY22 0x20
#define ATTINY26 0x21
#define ATTINY28 0x22
#define AT90S1200 0x33
#define AT90S2313 0x40
#define AT90S2323 0x41
#define AT90S2333 0x42
#define AT90S2343 0x43
#define AT90S4414 0x50
#define AT90S4433 0x51
#define AT90S4434 0x52
#define AT90S8515 0x60
#define AT90S8535 0x61
#define AT90C8534 0x62
#define ATMEGA8515 0x63
#define ATMEGA8535 0x64
#define ATMEGA8 0x70
#define ATMEGA161 0x80
#define ATMEGA163 0x81
#define ATMEGA16 0x82
#define ATMEGA162 0x83
#define ATMEGA169 0x84
#define ATMEGA323 0x90
#define ATMEGA32 0x91
#define ATMEGA103 0xB1
#define ATMEGA128 0xB2
#define AT86RF401 0xD0
#define AT89START 0xE0
#define AT89S51 0xE0
#define AT89S52 0xE1
#
# PART DEFINITIONS
#
part

6
main.c
View File

@ -103,9 +103,10 @@ extern char * lists_version;
extern char * main_version;
extern char * pgm_version;
extern char * ppi_version;
extern char * stk500_version;
extern char * term_version;
#define N_MODULES 8
#define N_MODULES 9
char ** modules[N_MODULES] = {
&avr_version,
@ -115,10 +116,11 @@ char ** modules[N_MODULES] = {
&main_version,
&pgm_version,
&ppi_version,
&stk500_version,
&term_version
};
char * version = "2.1.5";
char * version = "3.0.0";
char * main_version = "$Id$";

5
pgm.h
View File

@ -53,6 +53,7 @@ typedef struct programmer_t {
unsigned int pinno[N_PINS];
int ppidata;
int fd;
int page_size; /* page size if the programmer supports paged write/load */
int (*rdy_led) (struct programmer_t * pgm, int value);
int (*err_led) (struct programmer_t * pgm, int value);
int (*pgm_led) (struct programmer_t * pgm, int value);
@ -72,9 +73,9 @@ typedef struct programmer_t {
void (*open) (struct programmer_t * pgm, char * port);
void (*close) (struct programmer_t * pgm);
int (*paged_write) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
int n_bytes);
int page_size, int n_bytes);
int (*paged_load) (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
int n_bytes);
int page_size, int n_bytes);
} PROGRAMMER;

View File

@ -737,7 +737,8 @@ static int loadaddr(PROGRAMMER * pgm, uint16_t addr)
}
int stk500_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
int stk500_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes)
{
unsigned char buf[16];
int memtype;
@ -747,9 +748,6 @@ int stk500_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
int tries;
unsigned int n;
if (!m->paged)
return -1;
if (strcmp(m->desc, "flash") == 0) {
memtype = 'F';
}
@ -760,7 +758,7 @@ int stk500_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
return -2;
}
if (m->op[AVR_OP_LOADPAGE_LO])
if ((m->op[AVR_OP_LOADPAGE_LO]) || (m->op[AVR_OP_READ_LO]))
a_div = 2;
else
a_div = 1;
@ -770,26 +768,26 @@ int stk500_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
n = m->size;
}
else {
if ((n_bytes % m->page_size) != 0) {
n = n_bytes + m->page_size - (n_bytes % m->page_size);
if ((n_bytes % page_size) != 0) {
n = n_bytes + page_size - (n_bytes % page_size);
}
else {
n = n_bytes;
}
}
for (addr = 0; addr < n; addr += m->page_size) {
for (addr = 0; addr < n; addr += page_size) {
fprintf(stderr, "\r \r%6u", addr);
tries = 0;
retry:
tries++;
loadaddr(pgm, addr/a_div);
buf[0] = Cmnd_STK_PROG_PAGE;
buf[1] = (m->page_size >> 8) & 0xff;
buf[2] = m->page_size & 0xff;
buf[1] = (page_size >> 8) & 0xff;
buf[2] = page_size & 0xff;
buf[3] = memtype;
send(pgm, buf, 4);
for (i=0; i<m->page_size; i++) {
for (i=0; i<page_size; i++) {
buf[0] = m->buf[addr + i];
send(pgm, buf, 1);
}
@ -830,7 +828,8 @@ int stk500_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
}
int stk500_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
int stk500_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes)
{
unsigned char buf[16];
int memtype;
@ -839,9 +838,6 @@ int stk500_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
int tries;
unsigned int n;
if (!m->paged)
return -1;
if (strcmp(m->desc, "flash") == 0) {
memtype = 'F';
}
@ -852,7 +848,7 @@ int stk500_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
return -2;
}
if (m->op[AVR_OP_LOADPAGE_LO])
if ((m->op[AVR_OP_LOADPAGE_LO]) || (m->op[AVR_OP_READ_LO]))
a_div = 2;
else
a_div = 1;
@ -862,23 +858,26 @@ int stk500_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
n = m->size;
}
else {
if ((n_bytes % m->page_size) != 0) {
n = n_bytes + m->page_size - (n_bytes % m->page_size);
if ((n_bytes % page_size) != 0) {
n = n_bytes + page_size - (n_bytes % page_size);
}
else {
n = n_bytes;
}
}
for (addr = 0; addr < n; addr += m->page_size) {
fprintf(stderr, "%s: stk500_paged_load(): n=%d, a_div=%d\n",
progname, n, a_div);
for (addr = 0; addr < n; addr += page_size) {
fprintf(stderr, "\r \r%6u", addr);
tries = 0;
retry:
tries++;
loadaddr(pgm, addr/a_div);
buf[0] = Cmnd_STK_READ_PAGE;
buf[1] = (m->page_size >> 8) & 0xff;
buf[2] = m->page_size & 0xff;
buf[1] = (page_size >> 8) & 0xff;
buf[2] = page_size & 0xff;
buf[3] = memtype;
buf[4] = Sync_CRC_EOP;
send(pgm, buf, 5);
@ -901,7 +900,7 @@ int stk500_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, int n_bytes)
return -4;
}
recv(pgm, &m->buf[addr], m->page_size);
recv(pgm, &m->buf[addr], page_size);
recv(pgm, buf, 1);
if (buf[0] != Resp_STK_OK) {
@ -1020,6 +1019,7 @@ void stk500_initpgm(PROGRAMMER * pgm)
*/
pgm->paged_write = stk500_paged_write;
pgm->paged_load = stk500_paged_load;
pgm->page_size = 256;
}