Annual changelog rotation.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@891 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
parent
67769dcccf
commit
d73178474f
412
ChangeLog
412
ChangeLog
|
@ -54,415 +54,3 @@
|
||||||
|
|
||||||
* jtagmkII.c (jtagmkII_smc_init32): replace sleep() by usleep() for
|
* jtagmkII.c (jtagmkII_smc_init32): replace sleep() by usleep() for
|
||||||
win32 compatibility.
|
win32 compatibility.
|
||||||
|
|
||||||
2009-11-09 David Hoerl <dhoerl@mac.com>
|
|
||||||
|
|
||||||
* fileio.c: ihex2bin did not properly handle files > 64K bytes
|
|
||||||
* usb_libusb.c: re-enabled usb_reset for Macs (no reset causes lots of failures)
|
|
||||||
* avrdude.1: spacing issue for avr32 fixed.
|
|
||||||
|
|
||||||
2009-11-09 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* buspirate.c: Implemented reset= and speed= extended parameters.
|
|
||||||
* avrdude.1: Document the change.
|
|
||||||
|
|
||||||
2009-11-04 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* configure.ac, Makefile.am: Test if GCC accepts -Wno-pointer-sign
|
|
||||||
|
|
||||||
2009-11-04 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* buspirate.c: Implemented 'BinMode' support for
|
|
||||||
firmware 2.7 and higher.
|
|
||||||
* avrdude.1: Added info about BusPirate.
|
|
||||||
|
|
||||||
2009-11-03 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* arduino.c: Add on to bug #26703 / patch #6866 - clear DTR/RTS
|
|
||||||
when closing the port.
|
|
||||||
* Makefile.am: Silent warnings about signedness - they're useless
|
|
||||||
and annoying, especially for 'char' vars.
|
|
||||||
|
|
||||||
2009-10-22 David Hoerl <dhoerl@mac.com>
|
|
||||||
|
|
||||||
* usb_libusb.c: disabled usb_reset for Macs (same as FreeBSD)
|
|
||||||
|
|
||||||
2009-10-12 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* main.c: Re-added default to serial port for BusPirate.
|
|
||||||
|
|
||||||
2009-10-12 David Hoerl <dhoerl@mac.com>
|
|
||||||
|
|
||||||
* main.c: removed some avr32 code that was pushed into jtagmkII.c
|
|
||||||
* jtagmkII.c: consolodated the avr32 reset code and avr32_chipreset
|
|
||||||
* avrpart.h: modified AVRPART flags for avr32
|
|
||||||
* lexer.l: added is_avr32 flag - only way to get yacc code to set flag
|
|
||||||
* avrdude.conf.in: updated avr32 section to include "is_avr32" flag
|
|
||||||
|
|
||||||
2009-10-12 David Hoerl <dhoerl@mac.com>
|
|
||||||
|
|
||||||
* config_gram.y: Restored inadvertantly removed buspirate entry
|
|
||||||
* lexer.l: Restored inadvertantly removed buspirate entry
|
|
||||||
|
|
||||||
2009-10-12 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* buspirate.c: Replace GNU-only %as with %s in sscanf call.
|
|
||||||
* ser_win32.c(ser_set_dtr_rts): Fixed typo in parameter name.
|
|
||||||
* NEWS: Announce BusPirate.
|
|
||||||
|
|
||||||
2009-10-11 David Hoerl <dhoerl@mac.com>
|
|
||||||
|
|
||||||
Support for AVR32
|
|
||||||
|
|
||||||
* AUTHORS: added myself
|
|
||||||
* NEWS: announced AVR32 support
|
|
||||||
* main.c: AVR32 flag tests to avoid several code blocks
|
|
||||||
* fileio.c: mods to ihex read function to handle address offsets and
|
|
||||||
size of avr32
|
|
||||||
* jtagmkI.c: added cast to printf call to remove warning
|
|
||||||
* arduino.c: added header file to bring in prototype for usleep()
|
|
||||||
* config_gram.y: added defines for avr32, new jtag_mkii variant for avr32
|
|
||||||
* jtagmkII_private.h: new jtag_mkii message types defined (used by
|
|
||||||
avr32program)
|
|
||||||
* jtagmkII.h: extern jtagmkII_avr32_initpgm() addition
|
|
||||||
* jtagmkII.c: huge amount of code in support of avr32
|
|
||||||
* avrpart.h: additional flags to AVRPART for avr32
|
|
||||||
* usb_libusb.c: modified verbose test for USB read per-byte messages by
|
|
||||||
by one, so with verbose=3 you get just full messages, 4 gives you bytes
|
|
||||||
too
|
|
||||||
* lexer.l: additions for avr32
|
|
||||||
|
|
||||||
2009-10-10 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
Support for Arduino auto-reset:
|
|
||||||
* serial.h, ser_avrdoper.c, ser_posix.c, ser_win32.c: Added
|
|
||||||
serial_device.set_dtr_rts implementations.
|
|
||||||
* arduino.c, stk500.c, stk500.h: Call serial_set_dtr_rts()
|
|
||||||
to reset Arduino board before program upload.
|
|
||||||
Inspired by patch #6866, resolves bug #26703
|
|
||||||
|
|
||||||
2009-10-08 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* buspirate.c: Optimised buspirate_cmd() - reading 1kB EEPROM now
|
|
||||||
takes only 14 sec instead of almost 2 mins with the original
|
|
||||||
implementation.
|
|
||||||
|
|
||||||
2009-10-08 Michal Ludvig <mludvig@logix.net.nz>
|
|
||||||
|
|
||||||
* buspirate.c, buspirate.h: Support for the BusPirate programmer
|
|
||||||
* config_gram.y, avrdude.conf.in, main.c, lexer.l, Makefile.am:
|
|
||||||
Glue for BusPirate.
|
|
||||||
|
|
||||||
2009-08-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* usb_libusb.c (usbdev_close): Repair the logic around the
|
|
||||||
conditional compilation of usb_reset() introduced in r798.
|
|
||||||
|
|
||||||
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* configure.ac: We are post-5.8 now.
|
|
||||||
|
|
||||||
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* configure.ac: Prepare for releasing version 5.8
|
|
||||||
|
|
||||||
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Roger Wolff:
|
|
||||||
bug #26527: bug in unicode conversion
|
|
||||||
* ser_avrdoper.c (convertUniToAscii): when encountering a UTF-16
|
|
||||||
character that cannot be converted to ASCII, increment the UTF-16
|
|
||||||
pointer anyway when proceeding.
|
|
||||||
|
|
||||||
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* jtagmkI.c (jtagmkI_send): Replace %zd format by %u since not all
|
|
||||||
implementations do understand the C99 formatting options (sigh).
|
|
||||||
* jtagmkII.c (jtagmkII_send): (Ditto.)
|
|
||||||
* stk500v2.c (stk500v2_recv): (Ditto.)
|
|
||||||
|
|
||||||
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #26002: HVPP of EEPROM with AVR Dragon and ATmega8 Fails
|
|
||||||
* avrdude.conf.in (ATmega8): add page size for EEPROM.
|
|
||||||
|
|
||||||
2009-07-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* stk500v2.c: Fix a serious memory corruption problem resulting
|
|
||||||
out of the chaining of both, the stk500v2 and the jtagmkII
|
|
||||||
programmers for some programming hardware (JTAG ICE mkII and AVR
|
|
||||||
Dragon running in ISP, HVSP or PP mode), where both programmers
|
|
||||||
have to maintain their private programmer data.
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* configure.ac: Post-release (is pre-release...)
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* configure.ac: Prepare for releasing version 5.7
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* main.c: Add my name to the copyright output when being verbose.
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Contributed by Shaun Jackman <sjackman@gmail.com>
|
|
||||||
bug #21798: Fix both XSLT scripts
|
|
||||||
* tools/get-dw-params.xsl (format-hex): Add the parameter count.
|
|
||||||
* tools/get-hv-params.xsl (format_cstack): Ditto.
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #21922: ATmega163 still not working in version 5.5
|
|
||||||
* avrdude.conf.in (atmega163): fill in stk500v2 parameters, correct
|
|
||||||
some flash programming parameters as well.
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #22206: avrdude: ser_setspeed(): tcsetattr() failed
|
|
||||||
* ser_posix.c (ser_setspeed): Don't pass TCSAFLUSH to tcsetattr() as
|
|
||||||
it apparently fails to work on Solaris. After reading the
|
|
||||||
documentation again, it seems TCSAFLUSH and TCSANOW are indeed
|
|
||||||
mutually exclusive.
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #22234: WINDOWS version: HOWTO: Specify Serial Ports Larger than COM9
|
|
||||||
* ser_win32.c (ser_open): prepend \\.\ to any COM port name, so it is
|
|
||||||
safe to be used for COM ports above 9.
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #26408: Crash in stk500v2_open()
|
|
||||||
* stk500generic.c: Implement setup and teardown hooks, calling in turn
|
|
||||||
the respective hooks of the stk500v2 implementation.
|
|
||||||
|
|
||||||
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #26130: Avrdude doesn't display it's version.
|
|
||||||
* main.c (usage): add a version number display to the default usage
|
|
||||||
message.
|
|
||||||
|
|
||||||
2009-07-01 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #26412: avrdude segfaults when called with a programmer that does not
|
|
||||||
support it
|
|
||||||
* main.c: do not call pgm->perform_osccal() unless it is != 0.
|
|
||||||
|
|
||||||
2009-06-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Contributed by Zoltan Laday:
|
|
||||||
patch #6825: xmega problems with JTAGICEmkII
|
|
||||||
* jtagmkII.c: Many fixes for Xmega devices.
|
|
||||||
* jtagmkII_private.h: Add various new constants required for
|
|
||||||
Xmega devices.
|
|
||||||
* avrdude.conf.in: New devices: ATXMEGA64A1, ATXMEGA192A1,
|
|
||||||
ATXMEGA256A1, ATXMEGA64A3, ATXMEGA128A3, ATXMEGA192A3,
|
|
||||||
ATXMEGA256A3, ATXMEGA256A3B, ATXMEGA16A4, ATXMEGA32A4,
|
|
||||||
ATXMEGA64A4, ATXMEGA128A4
|
|
||||||
* avr.c (avr_read, avr_write): Add more names for (Xmega)
|
|
||||||
memory areas that require paged operation.
|
|
||||||
|
|
||||||
2009-06-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* stk500v2.c (stk600_xprog_write_byte): Handle writing fuse bytes.
|
|
||||||
|
|
||||||
2009-04-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Carl Hamilton:
|
|
||||||
* update.c (parse_op): correctly \0-terminate buf after filling
|
|
||||||
it, before it is potentially used as the source of a call to
|
|
||||||
strlen or strcpy.
|
|
||||||
|
|
||||||
2009-04-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* doc/avrdude.texi: Merge the -P 0xXXX option description from
|
|
||||||
avrdude.1.
|
|
||||||
|
|
||||||
2009-04-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* configure.ac: declare AM_PROG_CC_C_O to avoid the warning
|
|
||||||
"compiling `config_gram.c' with per-target flags
|
|
||||||
requires `AM_PROG_CC_C_O' in `configure.ac'"
|
|
||||||
|
|
||||||
2009-03-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #25971: "error writing to <stdout>" with multiple -U params.
|
|
||||||
* fileio.c: Do not close the input/output stream when working on an
|
|
||||||
stdio stream.
|
|
||||||
|
|
||||||
2009-02-28 Thomas Fischl <tfischl@gmx.de>
|
|
||||||
|
|
||||||
Based on patch #6484 commited by Jurgis Brigmanis:
|
|
||||||
* usbasp.c: added software control for ISP speed
|
|
||||||
* usbasp.h: (Ditto.)
|
|
||||||
|
|
||||||
2009-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* avr910.c (avr910_read_byte_flash): Eliminate a static variable that
|
|
||||||
hasn't been in use for 5 years.
|
|
||||||
|
|
||||||
2009-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* configure.ac: Post-release 5.6.
|
|
||||||
|
|
||||||
2009-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* configure.ac: Prepare for releasing version 5.6.
|
|
||||||
|
|
||||||
2009-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Ed Okerson:
|
|
||||||
* jtagmkII.c (jtagmkII_read_byte): Fix signature reading of
|
|
||||||
Xmega.
|
|
||||||
|
|
||||||
2009-02-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Mikael Hermansson:
|
|
||||||
* avrdude.conf.in (ATxmega256A3): new device.
|
|
||||||
* stk500v2 (stk500v2_initialize): Enable the AVRISPmkII as a
|
|
||||||
PDI-capable device for ATxmega parts.
|
|
||||||
|
|
||||||
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Lars Immisch:
|
|
||||||
patch #6750: Arduino support - new programmer-id
|
|
||||||
* arduino.c: New file, inherits stk500.c.
|
|
||||||
* arduino.h: New file.
|
|
||||||
* Makefile.am: Add arduino.c and arduino.h.
|
|
||||||
* config_gram.y: Add arduino keyword.
|
|
||||||
* lexer.l: (Ditto.)
|
|
||||||
* avrdude.conf.in: (Ditto.)
|
|
||||||
* avrdude.1: Document the new programmer type.
|
|
||||||
* doc/avrdude.texi: (Ditto.)
|
|
||||||
|
|
||||||
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* stk500v2.c: Turn all non-const static data into instance data.
|
|
||||||
|
|
||||||
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* Makefile.am: Move term.[ch] from the library into the CLI
|
|
||||||
application section, as it is not useful for anything else but
|
|
||||||
the CLI frontend.
|
|
||||||
|
|
||||||
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* avrdude.conf.in (ATmega1284P): new device.
|
|
||||||
|
|
||||||
2009-02-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
More fixes for Solaris, including fixes for the Sunpro compiler:
|
|
||||||
* avr.h: Remove stray semicolon.
|
|
||||||
* configure.ac: Add check for predefined types uint_t and ulong_t.
|
|
||||||
* confwin.c: Include "avrdude.h" on top to avoid empty translation
|
|
||||||
unit warning.
|
|
||||||
* ppwin.c: (Ditto.)
|
|
||||||
* ser_win32.c: (Ditto.)
|
|
||||||
* serbb_win32.c: (Ditto.)
|
|
||||||
* jtagmkII.c (jtagmkII_recv): remove unreachable "return".
|
|
||||||
* stk500.c (stk500_initialize): (Ditto.)
|
|
||||||
* par.c: Test for both, __sun__ and __sun to see whether we are
|
|
||||||
being compiled on Solaris.
|
|
||||||
* ppi.c: (Ditto.)
|
|
||||||
* stk500v2.c: Implement the DEBUG and DEBUGRECV macros in a way
|
|
||||||
that is compatible with the ISO C99 standard.
|
|
||||||
* usbtiny.c: Only typedef uint_t and ulong_t if they have not
|
|
||||||
been found already by the autoconf checks.
|
|
||||||
|
|
||||||
2009-02-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
bug #22204: Solaris10/11 Undefiniertes Symbol gethostbyname socket
|
|
||||||
connect
|
|
||||||
* configure.ac: Add checks for gethostent() and socket().
|
|
||||||
While being here, remove some old cruft left from ancient days.
|
|
||||||
|
|
||||||
2009-02-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* lexer.l: Bump the %p size so AT&T lex will continue to work.
|
|
||||||
|
|
||||||
2009-02-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
(Partially) submitted by John Voltz:
|
|
||||||
bug #20004: AVRDUDE update (-U) operations do not close files
|
|
||||||
* fileio.c (fmt_autodetect, fileio): fclose() files.
|
|
||||||
|
|
||||||
2009-02-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* usbtiny.c: Replace all but one (very unlikely to trigger) exit(1)
|
|
||||||
by return -1.
|
|
||||||
|
|
||||||
2009-02-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Dick Streefland:
|
|
||||||
patch #6749: make reading from the USBtinyISP programmer more robust
|
|
||||||
* usbtiny.c: Add code to retry failed communication attempts.
|
|
||||||
|
|
||||||
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Nick Hibma:
|
|
||||||
bug #22271: usb_reset in usb_libusb.c not necessary in FreeBSD 6.x
|
|
||||||
* usb_libusb.c (usbdev_close): Do not call usb_reset() on FreeBSD.
|
|
||||||
It is not necessary there.
|
|
||||||
|
|
||||||
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Andrew O. Shadoura:
|
|
||||||
bug #25156: add direct SPI transfer mode
|
|
||||||
* bitbang.c: Implement direct SPI transfers.
|
|
||||||
* bitbang.h: (Ditto.)
|
|
||||||
* par.c: (Ditto.)
|
|
||||||
* pgm.c: (Ditto.)
|
|
||||||
* pgm.h: (Ditto.)
|
|
||||||
* term.c: Add the "spi" and "pgm" commands.
|
|
||||||
* avrdude.1: Document the changes.
|
|
||||||
* doc/avrdude.texi: (Ditto.)
|
|
||||||
|
|
||||||
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Limor ("Lady Ada"):
|
|
||||||
bug #24749: add support for '328p
|
|
||||||
* avrdude.conf.in (ATmega328P): new device support.
|
|
||||||
|
|
||||||
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by "Womo":
|
|
||||||
bug #25241: AT90USB162, AT90USB82 device support patch for avrdude-5.5
|
|
||||||
(also: bug #21745: AT90USBxx2 support)
|
|
||||||
* avrdude.conf.in (AT90USB162, AT90USB82): new device support.
|
|
||||||
|
|
||||||
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Evangelos Arkalis:
|
|
||||||
patch #6069: Atmel AT89ISP Cable
|
|
||||||
* avrdude.conf.in (89isp): new programmer support.
|
|
||||||
|
|
||||||
2009-02-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Bob Paddock:
|
|
||||||
patch #6748: ATTiny88 Config
|
|
||||||
* avrdude.conf.in (ATtiny88): new device support.
|
|
||||||
|
|
||||||
2009-02-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Mark Litwack:
|
|
||||||
patch #6261: avrdude won't use dragon/debugwire to write a file
|
|
||||||
to eeprom
|
|
||||||
* jtagmkII.c (jtagmkII_paged_write): when in debugWire mode,
|
|
||||||
implement a paged write to EEPROM as a series of byte writes.
|
|
||||||
|
|
||||||
2009-02-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
Submitted by Janos Sallai:
|
|
||||||
patch #6542: paged_load fails on the MIB510 programming board
|
|
||||||
* stk500.c: Add a workaround for the different signon sequence on
|
|
||||||
MIB510 programmers.
|
|
||||||
|
|
||||||
2009-02-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
||||||
|
|
||||||
* avrdude.conf.in: Add the ATmega128RFA1.
|
|
||||||
* avrdude.1: document the addition of ATmega128RFA1.
|
|
||||||
* doc/avrdude.texi: (Ditto.)
|
|
||||||
|
|
||||||
|
|
|
@ -0,0 +1,411 @@
|
||||||
|
2009-11-09 David Hoerl <dhoerl@mac.com>
|
||||||
|
|
||||||
|
* fileio.c: ihex2bin did not properly handle files > 64K bytes
|
||||||
|
* usb_libusb.c: re-enabled usb_reset for Macs (no reset causes lots of failures)
|
||||||
|
* avrdude.1: spacing issue for avr32 fixed.
|
||||||
|
|
||||||
|
2009-11-09 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* buspirate.c: Implemented reset= and speed= extended parameters.
|
||||||
|
* avrdude.1: Document the change.
|
||||||
|
|
||||||
|
2009-11-04 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* configure.ac, Makefile.am: Test if GCC accepts -Wno-pointer-sign
|
||||||
|
|
||||||
|
2009-11-04 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* buspirate.c: Implemented 'BinMode' support for
|
||||||
|
firmware 2.7 and higher.
|
||||||
|
* avrdude.1: Added info about BusPirate.
|
||||||
|
|
||||||
|
2009-11-03 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* arduino.c: Add on to bug #26703 / patch #6866 - clear DTR/RTS
|
||||||
|
when closing the port.
|
||||||
|
* Makefile.am: Silent warnings about signedness - they're useless
|
||||||
|
and annoying, especially for 'char' vars.
|
||||||
|
|
||||||
|
2009-10-22 David Hoerl <dhoerl@mac.com>
|
||||||
|
|
||||||
|
* usb_libusb.c: disabled usb_reset for Macs (same as FreeBSD)
|
||||||
|
|
||||||
|
2009-10-12 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* main.c: Re-added default to serial port for BusPirate.
|
||||||
|
|
||||||
|
2009-10-12 David Hoerl <dhoerl@mac.com>
|
||||||
|
|
||||||
|
* main.c: removed some avr32 code that was pushed into jtagmkII.c
|
||||||
|
* jtagmkII.c: consolodated the avr32 reset code and avr32_chipreset
|
||||||
|
* avrpart.h: modified AVRPART flags for avr32
|
||||||
|
* lexer.l: added is_avr32 flag - only way to get yacc code to set flag
|
||||||
|
* avrdude.conf.in: updated avr32 section to include "is_avr32" flag
|
||||||
|
|
||||||
|
2009-10-12 David Hoerl <dhoerl@mac.com>
|
||||||
|
|
||||||
|
* config_gram.y: Restored inadvertantly removed buspirate entry
|
||||||
|
* lexer.l: Restored inadvertantly removed buspirate entry
|
||||||
|
|
||||||
|
2009-10-12 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* buspirate.c: Replace GNU-only %as with %s in sscanf call.
|
||||||
|
* ser_win32.c(ser_set_dtr_rts): Fixed typo in parameter name.
|
||||||
|
* NEWS: Announce BusPirate.
|
||||||
|
|
||||||
|
2009-10-11 David Hoerl <dhoerl@mac.com>
|
||||||
|
|
||||||
|
Support for AVR32
|
||||||
|
|
||||||
|
* AUTHORS: added myself
|
||||||
|
* NEWS: announced AVR32 support
|
||||||
|
* main.c: AVR32 flag tests to avoid several code blocks
|
||||||
|
* fileio.c: mods to ihex read function to handle address offsets and
|
||||||
|
size of avr32
|
||||||
|
* jtagmkI.c: added cast to printf call to remove warning
|
||||||
|
* arduino.c: added header file to bring in prototype for usleep()
|
||||||
|
* config_gram.y: added defines for avr32, new jtag_mkii variant for avr32
|
||||||
|
* jtagmkII_private.h: new jtag_mkii message types defined (used by
|
||||||
|
avr32program)
|
||||||
|
* jtagmkII.h: extern jtagmkII_avr32_initpgm() addition
|
||||||
|
* jtagmkII.c: huge amount of code in support of avr32
|
||||||
|
* avrpart.h: additional flags to AVRPART for avr32
|
||||||
|
* usb_libusb.c: modified verbose test for USB read per-byte messages by
|
||||||
|
by one, so with verbose=3 you get just full messages, 4 gives you bytes
|
||||||
|
too
|
||||||
|
* lexer.l: additions for avr32
|
||||||
|
|
||||||
|
2009-10-10 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
Support for Arduino auto-reset:
|
||||||
|
* serial.h, ser_avrdoper.c, ser_posix.c, ser_win32.c: Added
|
||||||
|
serial_device.set_dtr_rts implementations.
|
||||||
|
* arduino.c, stk500.c, stk500.h: Call serial_set_dtr_rts()
|
||||||
|
to reset Arduino board before program upload.
|
||||||
|
Inspired by patch #6866, resolves bug #26703
|
||||||
|
|
||||||
|
2009-10-08 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* buspirate.c: Optimised buspirate_cmd() - reading 1kB EEPROM now
|
||||||
|
takes only 14 sec instead of almost 2 mins with the original
|
||||||
|
implementation.
|
||||||
|
|
||||||
|
2009-10-08 Michal Ludvig <mludvig@logix.net.nz>
|
||||||
|
|
||||||
|
* buspirate.c, buspirate.h: Support for the BusPirate programmer
|
||||||
|
* config_gram.y, avrdude.conf.in, main.c, lexer.l, Makefile.am:
|
||||||
|
Glue for BusPirate.
|
||||||
|
|
||||||
|
2009-08-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* usb_libusb.c (usbdev_close): Repair the logic around the
|
||||||
|
conditional compilation of usb_reset() introduced in r798.
|
||||||
|
|
||||||
|
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* configure.ac: We are post-5.8 now.
|
||||||
|
|
||||||
|
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* configure.ac: Prepare for releasing version 5.8
|
||||||
|
|
||||||
|
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Roger Wolff:
|
||||||
|
bug #26527: bug in unicode conversion
|
||||||
|
* ser_avrdoper.c (convertUniToAscii): when encountering a UTF-16
|
||||||
|
character that cannot be converted to ASCII, increment the UTF-16
|
||||||
|
pointer anyway when proceeding.
|
||||||
|
|
||||||
|
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* jtagmkI.c (jtagmkI_send): Replace %zd format by %u since not all
|
||||||
|
implementations do understand the C99 formatting options (sigh).
|
||||||
|
* jtagmkII.c (jtagmkII_send): (Ditto.)
|
||||||
|
* stk500v2.c (stk500v2_recv): (Ditto.)
|
||||||
|
|
||||||
|
2009-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #26002: HVPP of EEPROM with AVR Dragon and ATmega8 Fails
|
||||||
|
* avrdude.conf.in (ATmega8): add page size for EEPROM.
|
||||||
|
|
||||||
|
2009-07-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* stk500v2.c: Fix a serious memory corruption problem resulting
|
||||||
|
out of the chaining of both, the stk500v2 and the jtagmkII
|
||||||
|
programmers for some programming hardware (JTAG ICE mkII and AVR
|
||||||
|
Dragon running in ISP, HVSP or PP mode), where both programmers
|
||||||
|
have to maintain their private programmer data.
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* configure.ac: Post-release (is pre-release...)
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* configure.ac: Prepare for releasing version 5.7
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* main.c: Add my name to the copyright output when being verbose.
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Contributed by Shaun Jackman <sjackman@gmail.com>
|
||||||
|
bug #21798: Fix both XSLT scripts
|
||||||
|
* tools/get-dw-params.xsl (format-hex): Add the parameter count.
|
||||||
|
* tools/get-hv-params.xsl (format_cstack): Ditto.
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #21922: ATmega163 still not working in version 5.5
|
||||||
|
* avrdude.conf.in (atmega163): fill in stk500v2 parameters, correct
|
||||||
|
some flash programming parameters as well.
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #22206: avrdude: ser_setspeed(): tcsetattr() failed
|
||||||
|
* ser_posix.c (ser_setspeed): Don't pass TCSAFLUSH to tcsetattr() as
|
||||||
|
it apparently fails to work on Solaris. After reading the
|
||||||
|
documentation again, it seems TCSAFLUSH and TCSANOW are indeed
|
||||||
|
mutually exclusive.
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #22234: WINDOWS version: HOWTO: Specify Serial Ports Larger than COM9
|
||||||
|
* ser_win32.c (ser_open): prepend \\.\ to any COM port name, so it is
|
||||||
|
safe to be used for COM ports above 9.
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #26408: Crash in stk500v2_open()
|
||||||
|
* stk500generic.c: Implement setup and teardown hooks, calling in turn
|
||||||
|
the respective hooks of the stk500v2 implementation.
|
||||||
|
|
||||||
|
2009-07-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #26130: Avrdude doesn't display it's version.
|
||||||
|
* main.c (usage): add a version number display to the default usage
|
||||||
|
message.
|
||||||
|
|
||||||
|
2009-07-01 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #26412: avrdude segfaults when called with a programmer that does not
|
||||||
|
support it
|
||||||
|
* main.c: do not call pgm->perform_osccal() unless it is != 0.
|
||||||
|
|
||||||
|
2009-06-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Contributed by Zoltan Laday:
|
||||||
|
patch #6825: xmega problems with JTAGICEmkII
|
||||||
|
* jtagmkII.c: Many fixes for Xmega devices.
|
||||||
|
* jtagmkII_private.h: Add various new constants required for
|
||||||
|
Xmega devices.
|
||||||
|
* avrdude.conf.in: New devices: ATXMEGA64A1, ATXMEGA192A1,
|
||||||
|
ATXMEGA256A1, ATXMEGA64A3, ATXMEGA128A3, ATXMEGA192A3,
|
||||||
|
ATXMEGA256A3, ATXMEGA256A3B, ATXMEGA16A4, ATXMEGA32A4,
|
||||||
|
ATXMEGA64A4, ATXMEGA128A4
|
||||||
|
* avr.c (avr_read, avr_write): Add more names for (Xmega)
|
||||||
|
memory areas that require paged operation.
|
||||||
|
|
||||||
|
2009-06-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* stk500v2.c (stk600_xprog_write_byte): Handle writing fuse bytes.
|
||||||
|
|
||||||
|
2009-04-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Carl Hamilton:
|
||||||
|
* update.c (parse_op): correctly \0-terminate buf after filling
|
||||||
|
it, before it is potentially used as the source of a call to
|
||||||
|
strlen or strcpy.
|
||||||
|
|
||||||
|
2009-04-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* doc/avrdude.texi: Merge the -P 0xXXX option description from
|
||||||
|
avrdude.1.
|
||||||
|
|
||||||
|
2009-04-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* configure.ac: declare AM_PROG_CC_C_O to avoid the warning
|
||||||
|
"compiling `config_gram.c' with per-target flags
|
||||||
|
requires `AM_PROG_CC_C_O' in `configure.ac'"
|
||||||
|
|
||||||
|
2009-03-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #25971: "error writing to <stdout>" with multiple -U params.
|
||||||
|
* fileio.c: Do not close the input/output stream when working on an
|
||||||
|
stdio stream.
|
||||||
|
|
||||||
|
2009-02-28 Thomas Fischl <tfischl@gmx.de>
|
||||||
|
|
||||||
|
Based on patch #6484 commited by Jurgis Brigmanis:
|
||||||
|
* usbasp.c: added software control for ISP speed
|
||||||
|
* usbasp.h: (Ditto.)
|
||||||
|
|
||||||
|
2009-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* avr910.c (avr910_read_byte_flash): Eliminate a static variable that
|
||||||
|
hasn't been in use for 5 years.
|
||||||
|
|
||||||
|
2009-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* configure.ac: Post-release 5.6.
|
||||||
|
|
||||||
|
2009-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* configure.ac: Prepare for releasing version 5.6.
|
||||||
|
|
||||||
|
2009-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Ed Okerson:
|
||||||
|
* jtagmkII.c (jtagmkII_read_byte): Fix signature reading of
|
||||||
|
Xmega.
|
||||||
|
|
||||||
|
2009-02-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Mikael Hermansson:
|
||||||
|
* avrdude.conf.in (ATxmega256A3): new device.
|
||||||
|
* stk500v2 (stk500v2_initialize): Enable the AVRISPmkII as a
|
||||||
|
PDI-capable device for ATxmega parts.
|
||||||
|
|
||||||
|
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Lars Immisch:
|
||||||
|
patch #6750: Arduino support - new programmer-id
|
||||||
|
* arduino.c: New file, inherits stk500.c.
|
||||||
|
* arduino.h: New file.
|
||||||
|
* Makefile.am: Add arduino.c and arduino.h.
|
||||||
|
* config_gram.y: Add arduino keyword.
|
||||||
|
* lexer.l: (Ditto.)
|
||||||
|
* avrdude.conf.in: (Ditto.)
|
||||||
|
* avrdude.1: Document the new programmer type.
|
||||||
|
* doc/avrdude.texi: (Ditto.)
|
||||||
|
|
||||||
|
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* stk500v2.c: Turn all non-const static data into instance data.
|
||||||
|
|
||||||
|
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* Makefile.am: Move term.[ch] from the library into the CLI
|
||||||
|
application section, as it is not useful for anything else but
|
||||||
|
the CLI frontend.
|
||||||
|
|
||||||
|
2009-02-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* avrdude.conf.in (ATmega1284P): new device.
|
||||||
|
|
||||||
|
2009-02-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
More fixes for Solaris, including fixes for the Sunpro compiler:
|
||||||
|
* avr.h: Remove stray semicolon.
|
||||||
|
* configure.ac: Add check for predefined types uint_t and ulong_t.
|
||||||
|
* confwin.c: Include "avrdude.h" on top to avoid empty translation
|
||||||
|
unit warning.
|
||||||
|
* ppwin.c: (Ditto.)
|
||||||
|
* ser_win32.c: (Ditto.)
|
||||||
|
* serbb_win32.c: (Ditto.)
|
||||||
|
* jtagmkII.c (jtagmkII_recv): remove unreachable "return".
|
||||||
|
* stk500.c (stk500_initialize): (Ditto.)
|
||||||
|
* par.c: Test for both, __sun__ and __sun to see whether we are
|
||||||
|
being compiled on Solaris.
|
||||||
|
* ppi.c: (Ditto.)
|
||||||
|
* stk500v2.c: Implement the DEBUG and DEBUGRECV macros in a way
|
||||||
|
that is compatible with the ISO C99 standard.
|
||||||
|
* usbtiny.c: Only typedef uint_t and ulong_t if they have not
|
||||||
|
been found already by the autoconf checks.
|
||||||
|
|
||||||
|
2009-02-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
bug #22204: Solaris10/11 Undefiniertes Symbol gethostbyname socket
|
||||||
|
connect
|
||||||
|
* configure.ac: Add checks for gethostent() and socket().
|
||||||
|
While being here, remove some old cruft left from ancient days.
|
||||||
|
|
||||||
|
2009-02-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* lexer.l: Bump the %p size so AT&T lex will continue to work.
|
||||||
|
|
||||||
|
2009-02-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
(Partially) submitted by John Voltz:
|
||||||
|
bug #20004: AVRDUDE update (-U) operations do not close files
|
||||||
|
* fileio.c (fmt_autodetect, fileio): fclose() files.
|
||||||
|
|
||||||
|
2009-02-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* usbtiny.c: Replace all but one (very unlikely to trigger) exit(1)
|
||||||
|
by return -1.
|
||||||
|
|
||||||
|
2009-02-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Dick Streefland:
|
||||||
|
patch #6749: make reading from the USBtinyISP programmer more robust
|
||||||
|
* usbtiny.c: Add code to retry failed communication attempts.
|
||||||
|
|
||||||
|
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Nick Hibma:
|
||||||
|
bug #22271: usb_reset in usb_libusb.c not necessary in FreeBSD 6.x
|
||||||
|
* usb_libusb.c (usbdev_close): Do not call usb_reset() on FreeBSD.
|
||||||
|
It is not necessary there.
|
||||||
|
|
||||||
|
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Andrew O. Shadoura:
|
||||||
|
bug #25156: add direct SPI transfer mode
|
||||||
|
* bitbang.c: Implement direct SPI transfers.
|
||||||
|
* bitbang.h: (Ditto.)
|
||||||
|
* par.c: (Ditto.)
|
||||||
|
* pgm.c: (Ditto.)
|
||||||
|
* pgm.h: (Ditto.)
|
||||||
|
* term.c: Add the "spi" and "pgm" commands.
|
||||||
|
* avrdude.1: Document the changes.
|
||||||
|
* doc/avrdude.texi: (Ditto.)
|
||||||
|
|
||||||
|
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Limor ("Lady Ada"):
|
||||||
|
bug #24749: add support for '328p
|
||||||
|
* avrdude.conf.in (ATmega328P): new device support.
|
||||||
|
|
||||||
|
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by "Womo":
|
||||||
|
bug #25241: AT90USB162, AT90USB82 device support patch for avrdude-5.5
|
||||||
|
(also: bug #21745: AT90USBxx2 support)
|
||||||
|
* avrdude.conf.in (AT90USB162, AT90USB82): new device support.
|
||||||
|
|
||||||
|
2009-02-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Evangelos Arkalis:
|
||||||
|
patch #6069: Atmel AT89ISP Cable
|
||||||
|
* avrdude.conf.in (89isp): new programmer support.
|
||||||
|
|
||||||
|
2009-02-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Bob Paddock:
|
||||||
|
patch #6748: ATTiny88 Config
|
||||||
|
* avrdude.conf.in (ATtiny88): new device support.
|
||||||
|
|
||||||
|
2009-02-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Mark Litwack:
|
||||||
|
patch #6261: avrdude won't use dragon/debugwire to write a file
|
||||||
|
to eeprom
|
||||||
|
* jtagmkII.c (jtagmkII_paged_write): when in debugWire mode,
|
||||||
|
implement a paged write to EEPROM as a series of byte writes.
|
||||||
|
|
||||||
|
2009-02-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
Submitted by Janos Sallai:
|
||||||
|
patch #6542: paged_load fails on the MIB510 programming board
|
||||||
|
* stk500.c: Add a workaround for the different signon sequence on
|
||||||
|
MIB510 programmers.
|
||||||
|
|
||||||
|
2009-02-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
||||||
|
|
||||||
|
* avrdude.conf.in: Add the ATmega128RFA1.
|
||||||
|
* avrdude.1: document the addition of ATmega128RFA1.
|
||||||
|
* doc/avrdude.texi: (Ditto.)
|
||||||
|
|
Loading…
Reference in New Issue