Bring up to date.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@111 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Brian S. Dean
parent
bb4a4a889d
commit
d0bfd4ab05
50
avrdude.1
50
avrdude.1
|
|
@ -89,10 +89,21 @@ as a standalone assembler, or
|
||||||
.Xr avr-objcopy 1
|
.Xr avr-objcopy 1
|
||||||
for the final stage of the GNU toolchain for the AVR microcontroller.
|
for the final stage of the GNU toolchain for the AVR microcontroller.
|
||||||
.Pp
|
.Pp
|
||||||
Both, EEPROM cells and the flash ROM can be programmed (separately).
|
.Nm Avrprog
|
||||||
It is also possible to read the chip (provided it has not been
|
can program the EEPROM and flash ROM memory cells of supported AVR
|
||||||
code-protected previously, of course) and store the data in a file.
|
parts. Where supported by the serial instruction set, fuse bits and
|
||||||
Finally, a ``terminal'' mode is available that allows one to
|
lock bits can be programmed as well. These are implemented within
|
||||||
|
.Nm
|
||||||
|
as seperate memory types and can be programmed using data from a file
|
||||||
|
(see the
|
||||||
|
.Fl m
|
||||||
|
option) or from terminal mode (see the
|
||||||
|
.Ar dump
|
||||||
|
and
|
||||||
|
.Ar write
|
||||||
|
commands). It is also possible to read the chip (provided it has not
|
||||||
|
been code-protected previously, of course) and store the data in a
|
||||||
|
file. Finally, a ``terminal'' mode is available that allows one to
|
||||||
interactively communicate with the MCU, and to display or program
|
interactively communicate with the MCU, and to display or program
|
||||||
individual memory cells.
|
individual memory cells.
|
||||||
.Ss Options
|
.Ss Options
|
||||||
|
|
@ -120,7 +131,10 @@ ll.
|
||||||
4434 AT90S4434
|
4434 AT90S4434
|
||||||
8515 AT90S8515
|
8515 AT90S8515
|
||||||
8535 AT90S8535
|
8535 AT90S8535
|
||||||
103 ATMEGA103
|
m163 ATMEGA163
|
||||||
|
m103 ATMEGA103
|
||||||
|
m16 ATMEGA16
|
||||||
|
m8 ATMEGA8
|
||||||
.TE
|
.TE
|
||||||
.It Fl c Ar programmer-id
|
.It Fl c Ar programmer-id
|
||||||
Use the pin configuration specified by the argument. Pin
|
Use the pin configuration specified by the argument. Pin
|
||||||
|
|
@ -242,11 +256,17 @@ to use
|
||||||
as the input.
|
as the input.
|
||||||
.It Fl m Ar memtype
|
.It Fl m Ar memtype
|
||||||
Specifies which program area of the MCU to read or write; allowable
|
Specifies which program area of the MCU to read or write; allowable
|
||||||
values are
|
values depend on the MCU being programmed, but most support at least
|
||||||
.Em eeprom
|
.Em eeprom
|
||||||
for the EEPROM, or
|
for the EEPROM, and
|
||||||
.Em flash
|
.Em flash
|
||||||
for the flash ROM, which is also the default.
|
for the flash ROM. Use the
|
||||||
|
.Fl v
|
||||||
|
option on the command line or the
|
||||||
|
.Ar part
|
||||||
|
command from terminal mode to display all the memory types supported
|
||||||
|
by a particular device. The default is
|
||||||
|
.Em flash .
|
||||||
.It Fl n
|
.It Fl n
|
||||||
No-write - disables actually writing data to the MCU (useful for debugging
|
No-write - disables actually writing data to the MCU (useful for debugging
|
||||||
.Nm avrprog
|
.Nm avrprog
|
||||||
|
|
@ -281,7 +301,7 @@ a command history using
|
||||||
so previously entered command lines can be recalled and edited. The
|
so previously entered command lines can be recalled and edited. The
|
||||||
following commands are currently implemented:
|
following commands are currently implemented:
|
||||||
.Bl -tag -offset indent -width indent
|
.Bl -tag -offset indent -width indent
|
||||||
.It Ar dump eeprom\&|flash addr nbytes
|
.It Ar dump memtype addr nbytes
|
||||||
Read
|
Read
|
||||||
.Ar nbytes
|
.Ar nbytes
|
||||||
bytes from the specified memory area, and display them in the usual
|
bytes from the specified memory area, and display them in the usual
|
||||||
|
|
@ -292,7 +312,7 @@ Continue dumping the memory contents for another
|
||||||
where the previous
|
where the previous
|
||||||
.Ar dump
|
.Ar dump
|
||||||
command left off.
|
command left off.
|
||||||
.It Ar write eeprom\&|flash addr byte1 ... byteN
|
.It Ar write memtype addr byte1 ... byteN
|
||||||
Manually program the respective memory cells, starting at address
|
Manually program the respective memory cells, starting at address
|
||||||
.Ar addr ,
|
.Ar addr ,
|
||||||
using the values
|
using the values
|
||||||
|
|
@ -300,9 +320,16 @@ using the values
|
||||||
through
|
through
|
||||||
.Ar byteN .
|
.Ar byteN .
|
||||||
This feature is not implemented for bank-addressed memories such as
|
This feature is not implemented for bank-addressed memories such as
|
||||||
flash memory of ATMega devices.
|
the flash memory of ATMega devices.
|
||||||
.It Ar erase
|
.It Ar erase
|
||||||
Perform a chip erase.
|
Perform a chip erase.
|
||||||
|
.It Ar send b1 b2 b3 b4
|
||||||
|
Send raw instruction codes to the AVR device. If you need access to a
|
||||||
|
feature of an AVR part that is not directly supported by
|
||||||
|
.Nm ,
|
||||||
|
this command allows you to use it, even though
|
||||||
|
.Nm
|
||||||
|
does not implement the command.
|
||||||
.It Ar sig
|
.It Ar sig
|
||||||
Display the device signature bytes.
|
Display the device signature bytes.
|
||||||
.It Ar part
|
.It Ar part
|
||||||
|
|
@ -347,7 +374,6 @@ Schematic of programming hardware
|
||||||
.\" .Sh EXAMPLES
|
.\" .Sh EXAMPLES
|
||||||
.\" .Sh DIAGNOSTICS
|
.\" .Sh DIAGNOSTICS
|
||||||
.Sh SEE ALSO
|
.Sh SEE ALSO
|
||||||
.Xr asl 1 ,
|
|
||||||
.Xr avr-objcopy 1 ,
|
.Xr avr-objcopy 1 ,
|
||||||
.Xr ppi 4 ,
|
.Xr ppi 4 ,
|
||||||
.Xr readline 3
|
.Xr readline 3
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue