Xmega page erase implementation for JTAGICEmkII

* jtagmkII.c: Handle flash pages sizes > 256 bytes, implement
page_erase() method
* avrdude.conf.in: Change flash pagesize for all Xmega devices
to 512 bytes
* avr.c: Implement auto_erase, using page_erase if available
* avr.h: Remove unused parameters from avr_read(), replace
unused parameter in avr_write)() by auto_erase
* stk500v2.c: Handle flash page sizes > 256 bytes
* update.c (do_op): Handle new updateflags parameter
* main.c: Implement auto_erase as page_erase if possible
* update.h (enum updateflags): New enum
* pgm.h (struct programmer_t): Add page_erase method



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1089 81a1dc3b-b13d-400b-aceb-764788c761c2

ChangeLog

@@ -1,3 +1,19 @@
+2012-05-04  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
+
+	Xmega page erase implementation for JTAGICEmkII
+	* jtagmkII.c: Handle flash pages sizes > 256 bytes, implement
+	page_erase() method
+	* avrdude.conf.in: Change flash pagesize for all Xmega devices
+	to 512 bytes
+	* avr.c: Implement auto_erase, using page_erase if available
+	* avr.h: Remove unused parameters from avr_read(), replace
+	unused parameter in avr_write)() by auto_erase
+	* stk500v2.c: Handle flash page sizes > 256 bytes
+	* update.c (do_op): Handle new updateflags parameter
+	* main.c: Implement auto_erase as page_erase if possible
+	* update.h (enum updateflags): New enum
+	* pgm.h (struct programmer_t): Add page_erase method
+
 2012-04-26  Joerg Wunsch <j.gnu@uriah.heep.sax.de>
 
 	* jtagmkII.c (jtagmkII_paged_load, jtagmkII_paged_write): fix bug

NEWS

@@ -86,6 +86,9 @@ Current:
     Xmega devices, and "flash" for everything else.  This ensures
     the bootloader is not touched.
 
+  * For programmers that support it, the default erase method is a
+    page erase now, rather than a chip erase (Xmega only).
+
   * Programmers and parts lists
 
     They are now sorted at output with '-c ?'/'-p ?'. (patch #7671:

avr.c

@@ -213,7 +213,7 @@ int avr_mem_hiaddr(AVRMEM * mem)
  * Return the number of bytes read, or < 0 if an error occurs.  
  */
 int avr_read(PROGRAMMER * pgm, AVRPART * p, char * memtype,
-             AVRPART * v, int verb)
+             AVRPART * v)
 {
   unsigned long    i, lastaddr;
   unsigned char    cmd[4];
@@ -718,7 +718,7 @@ int avr_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
  * Return the number of bytes written, or -1 if an error occurs.
  */
 int avr_write(PROGRAMMER * pgm, AVRPART * p, char * memtype, int size, 
-              int verb)
+              int auto_erase)
 {
   int              rc;
   int              newpage, page_tainted, flush_page, do_write;
@@ -813,6 +813,10 @@ int avr_write(PROGRAMMER * pgm, AVRPART * p, char * memtype, int size,
           break;
         }
       if (need_write) {
+        rc = 0;
+        if (auto_erase)
+          rc = pgm->page_erase(pgm, p, m, pageaddr);
+        if (rc >= 0)
           rc = pgm->paged_write(pgm, p, m, m->page_size, pageaddr, m->page_size);
         if (rc < 0)
           /* paged write failed, fall back to byte-at-a-time write below */
@@ -925,7 +929,7 @@ int avr_signature(PROGRAMMER * pgm, AVRPART * p)
   int rc;
 
   report_progress (0,1,"Reading");
-  rc = avr_read(pgm, p, "signature", 0, 0);
+  rc = avr_read(pgm, p, "signature", 0);
   if (rc < 0) {
     fprintf(stderr,
             "%s: error reading signature data for part \"%s\", rc=%d\n",

avr.h

@@ -41,8 +41,7 @@ int avr_tpi_poll_nvmbsy(PROGRAMMER *pgm);
 int avr_read_byte_default(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
 			  unsigned long addr, unsigned char * value);
 
-int avr_read(PROGRAMMER * pgm, AVRPART * p, char * memtype, AVRPART * v,
+int avr_read(PROGRAMMER * pgm, AVRPART * p, char * memtype, AVRPART * v);
-             int verbose);
 
 int avr_write_page(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
                    unsigned long addr);
@@ -54,7 +53,7 @@ int avr_write_byte_default(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
 			   unsigned long addr, unsigned char data);
 
 int avr_write(PROGRAMMER * pgm, AVRPART * p, char * memtype, int size,
-              int verbose);
+              int auto_erase);
 
 int avr_signature(PROGRAMMER * pgm, AVRPART * p);
 

avrdude.conf.in

@@ -12291,14 +12291,14 @@ part
     memory "prodsig"
         size		= 0x200;
         offset		= 0x8e0200;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "usersig"
         size		= 0x200;
         offset		= 0x8e0400;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12358,28 +12358,28 @@ part parent ".xmega"
     memory "application"
         size		= 0x00010000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00001000;
         offset		= 0x0080f000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "boot"
         size		= 0x00001000;
         offset		= 0x00810000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00011000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12408,28 +12408,28 @@ part parent ".xmega"
     memory "application"
         size		= 0x00020000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00002000;
         offset		= 0x0081e000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "boot"
         size		= 0x00002000;
         offset		= 0x00820000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00022000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12468,28 +12468,28 @@ part parent ".xmega"
     memory "application"
         size		= 0x00030000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00002000;
         offset		= 0x0082e000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "boot"
         size		= 0x00002000;
         offset		= 0x00830000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00032000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12518,28 +12518,28 @@ part parent ".xmega"
     memory "application"
         size		= 0x00040000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00002000;
         offset		= 0x0083e000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "boot"
         size		= 0x00002000;
         offset		= 0x00840000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00042000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12618,14 +12618,14 @@ part parent ".xmega"
     memory "application"
         size		= 0x00004000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00001000;
         offset		= 0x00803000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12639,7 +12639,7 @@ part parent ".xmega"
     memory "flash"
         size		= 0x00005000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12668,28 +12668,28 @@ part parent ".xmega"
     memory "application"
         size		= 0x00008000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00001000;
         offset		= 0x00807000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "boot"
         size		= 0x00001000;
         offset		= 0x00808000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00009000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12738,28 +12738,28 @@ part parent ".xmega"
     memory "application"
         size		= 0x00004000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00001000;
         offset		= 0x00803000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "boot"
         size		= 0x00001000;
         offset		= 0x00804000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00005000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 ;
@@ -12784,28 +12784,28 @@ part parent ".xmega"
     memory "application"
         size		= 0x00008000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "apptable"
         size		= 0x00001000;
         offset		= 0x00807000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "boot"
         size		= 0x00001000;
         offset		= 0x00808000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00009000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 ;
@@ -12830,7 +12830,7 @@ part parent ".xmega"
     memory "application"
         size		= 0x00010000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12844,14 +12844,14 @@ part parent ".xmega"
     memory "boot"
         size		= 0x00001000;
         offset		= 0x00810000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
     memory "flash"
         size		= 0x00011000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 ;
@@ -12876,7 +12876,7 @@ part parent ".xmega"
     memory "application"
         size		= 0x00020000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12886,7 +12886,7 @@ part parent ".xmega"
         # XML file also says it's 8 KiB, use this.
         size		= 0x00002000;
         offset		= 0x0081e000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 
@@ -12900,7 +12900,7 @@ part parent ".xmega"
     memory "flash"
         size		= 0x00022000;
         offset		= 0x0800000;
-        page_size	= 0x100;
+        page_size	= 0x200;
         readsize	= 0x100;
     ;
 ;

jtagmkII.c

@@ -993,10 +993,13 @@ static void jtagmkII_set_devdescr(PROGRAMMER * pgm, AVRPART * p)
   for (ln = lfirst(p->mem); ln; ln = lnext(ln)) {
     m = ldata(ln);
     if (strcmp(m->desc, "flash") == 0) {
-      PDATA(pgm)->flash_pagesize = m->page_size;
+      if (m->page_size > 256)
+        PDATA(pgm)->flash_pagesize = 256;
+      else
+        PDATA(pgm)->flash_pagesize = m->page_size;
       u32_to_b4(sendbuf.dd.ulFlashSize, m->size);
-      u16_to_b2(sendbuf.dd.uiFlashPageSize, PDATA(pgm)->flash_pagesize);
+      u16_to_b2(sendbuf.dd.uiFlashPageSize, m->page_size);
-      u16_to_b2(sendbuf.dd.uiFlashpages, m->size / PDATA(pgm)->flash_pagesize);
+      u16_to_b2(sendbuf.dd.uiFlashpages, m->size / m->page_size);
       if (p->flags & AVRPART_HAS_DW) {
 	memcpy(sendbuf.dd.ucFlashInst, p->flash_instr, FLASH_INSTR_SIZE);
 	memcpy(sendbuf.dd.ucEepromInst, p->eeprom_instr, EEPROM_INSTR_SIZE);
@@ -1061,8 +1064,11 @@ static void jtagmkII_set_xmega_params(PROGRAMMER * pgm, AVRPART * p)
   for (ln = lfirst(p->mem); ln; ln = lnext(ln)) {
     m = ldata(ln);
     if (strcmp(m->desc, "flash") == 0) {
-      PDATA(pgm)->flash_pagesize = m->page_size;
+      if (m->page_size > 256)
-      u16_to_b2(sendbuf.dd.flash_page_size, m->page_size * 2);
+        PDATA(pgm)->flash_pagesize = 256;
+      else
+        PDATA(pgm)->flash_pagesize = m->page_size;
+      u16_to_b2(sendbuf.dd.flash_page_size, m->page_size);
     } else if (strcmp(m->desc, "eeprom") == 0) {
       sendbuf.dd.eeprom_page_size = m->page_size;
       u16_to_b2(sendbuf.dd.eeprom_size, m->size);
@@ -1366,6 +1372,15 @@ static int jtagmkII_initialize(PROGRAMMER * pgm, AVRPART * p)
     return -1;
   }
 
+  /*
+   * If this is an ATxmega device in JTAG mode, change the emulator
+   * mode from JTAG to JTAG_XMEGA.
+   */
+  if ((pgm->flag & PGM_FL_IS_JTAG) &&
+      (p->flags & AVRPART_HAS_PDI)) {
+    if (jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG_XMEGA) < 0)
+      return -1;
+  }
   /*
    * Must set the device descriptor before entering programming mode.
    */
@@ -1381,8 +1396,6 @@ static int jtagmkII_initialize(PROGRAMMER * pgm, AVRPART * p)
    */
   if ((pgm->flag & PGM_FL_IS_JTAG) &&
       (p->flags & AVRPART_HAS_PDI)) {
-    if (jtagmkII_getsync(pgm, EMULATOR_MODE_JTAG_XMEGA) < 0)
-      return -1;
     /*
      * Find out where the border between application and boot area
      * is.
@@ -1394,6 +1407,16 @@ static int jtagmkII_initialize(PROGRAMMER * pgm, AVRPART * p)
               "%s: jtagmkII_initialize(): Cannot locate \"flash\" and \"boot\" memories in description\n",
               progname);
     } else {
+      if (PDATA(pgm)->fwver < 0x700) {
+        /* V7+ firmware does not need this anymore */
+        unsigned char par[4];
+
+        u32_to_b4(par, flashmem->offset);
+        (void) jtagmkII_setparm(pgm, PAR_PDI_OFFSET_START, par);
+        u32_to_b4(par, bootmem->offset);
+        (void) jtagmkII_setparm(pgm, PAR_PDI_OFFSET_END, par);
+      }
+
       PDATA(pgm)->boot_start = bootmem->offset - flashmem->offset;
     }
   }
@@ -1856,6 +1879,107 @@ void jtagmkII_close(PROGRAMMER * pgm)
   pgm->fd.ifd = -1;
 }
 
+static int jtagmkII_page_erase(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
+                               unsigned int addr)
+{
+  unsigned char cmd[6];
+  unsigned char *resp;
+  int status, tries;
+  long otimeout = serial_recv_timeout;
+
+  if (verbose >= 2)
+    fprintf(stderr, "%s: jtagmkII_page_erase(.., %s, 0x%x)\n",
+	    progname, m->desc, addr);
+
+  if (!(p->flags & AVRPART_HAS_PDI)) {
+    fprintf(stderr, "%s: jtagmkII_page_erase: not an Xmega device\n",
+	    progname);
+    return -1;
+  }
+  if ((pgm->flag & PGM_FL_IS_DW)) {
+    fprintf(stderr, "%s: jtagmkII_page_erase: not applicable to debugWIRE\n",
+	    progname);
+    return -1;
+  }
+
+  if (jtagmkII_program_enable(pgm) < 0)
+    return -1;
+
+  cmd[0] = CMND_XMEGA_ERASE;
+  if (strcmp(m->desc, "flash") == 0) {
+    if (jtagmkII_memtype(pgm, p, addr) == MTYPE_FLASH)
+      cmd[1] = XMEGA_ERASE_APP_PAGE;
+    else
+      cmd[1] = XMEGA_ERASE_BOOT_PAGE;
+  } else if (strcmp(m->desc, "eeprom") == 0) {
+    cmd[1] = XMEGA_ERASE_EEPROM_PAGE;
+  } else if ( ( strcmp(m->desc, "usersig") == 0 ) ) {
+    cmd[1] = XMEGA_ERASE_USERSIG;
+  } else if ( ( strcmp(m->desc, "boot") == 0 ) ) {
+    cmd[1] = XMEGA_ERASE_BOOT_PAGE;
+  } else {
+    cmd[1] = XMEGA_ERASE_APP_PAGE;
+  }
+  serial_recv_timeout = 100;
+
+  /*
+   * Don't use jtagmkII_memaddr() here.  While with all other
+   * commands, firmware 7+ doesn't require the NVM offsets being
+   * applied, the erase page commands make an exception, and do
+   * require the NVM offsets as part of the (page) address.
+   */
+  u32_to_b4(cmd + 2, addr + m->offset);
+
+  tries = 0;
+
+  retry:
+  if (verbose >= 2)
+    fprintf(stderr, "%s: jtagmkII_page_erase(): "
+            "Sending xmega erase command: ",
+            progname);
+  jtagmkII_send(pgm, cmd, sizeof cmd);
+
+  status = jtagmkII_recv(pgm, &resp);
+  if (status <= 0) {
+    if (verbose >= 2)
+      putc('\n', stderr);
+    if (verbose >= 1)
+      fprintf(stderr,
+              "%s: jtagmkII_page_erase(): "
+              "timeout/error communicating with programmer (status %d)\n",
+              progname, status);
+    if (tries++ < 4) {
+      serial_recv_timeout *= 2;
+      goto retry;
+    }
+    fprintf(stderr,
+            "%s: jtagmkII_page_erase(): fatal timeout/"
+            "error communicating with programmer (status %d)\n",
+            progname, status);
+    serial_recv_timeout = otimeout;
+    return -1;
+  }
+  if (verbose >= 3) {
+    putc('\n', stderr);
+    jtagmkII_prmsg(pgm, resp, status);
+  } else if (verbose == 2)
+    fprintf(stderr, "0x%02x (%d bytes msg)\n", resp[0], status);
+  if (resp[0] != RSP_OK) {
+    fprintf(stderr,
+            "%s: jtagmkII_page_erase(): "
+            "bad response to xmega erase command: %s\n",
+            progname, jtagmkII_get_rc(resp[0]));
+    free(resp);
+    serial_recv_timeout = otimeout;
+    return -1;
+  }
+  free(resp);
+
+  serial_recv_timeout = otimeout;
+
+  return 0;
+}
+
 static int jtagmkII_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
                                 unsigned int page_size,
                                 unsigned int addr, unsigned int n_bytes)
@@ -1864,7 +1988,6 @@ static int jtagmkII_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
   unsigned int maxaddr = addr + n_bytes;
   unsigned char *cmd;
   unsigned char *resp;
-  unsigned char par[4];
   int status, tries, dynamic_memtype = 0;
   long otimeout = serial_recv_timeout;
 
@@ -1876,24 +1999,17 @@ static int jtagmkII_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
     return -1;
 
   if (page_size == 0) page_size = 256;
+  else if (page_size > 256) page_size = 256;
 
   if ((cmd = malloc(page_size + 10)) == NULL) {
     fprintf(stderr, "%s: jtagmkII_paged_write(): Out of memory\n",
 	    progname);
     return -1;
   }
-  if ( p->flags & AVRPART_HAS_PDI )
-  {
-   u32_to_b4( par, m->offset );
-   (void) jtagmkII_setparm( pgm, PAR_PDI_OFFSET_START, par );
-   u32_to_b4( par, m->offset + m->size );
-   (void) jtagmkII_setparm( pgm, PAR_PDI_OFFSET_END, par );
-  }
 
   cmd[0] = CMND_WRITE_MEMORY;
   if (strcmp(m->desc, "flash") == 0) {
     PDATA(pgm)->flash_pageaddr = (unsigned long)-1L;
-    page_size = PDATA(pgm)->flash_pagesize;
     cmd[1] = jtagmkII_memtype(pgm, p, addr);
     if (p->flags & AVRPART_HAS_PDI)
       /* dynamically decide between flash/boot memtype */
@@ -1916,7 +2032,6 @@ static int jtagmkII_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
     }
     cmd[1] = ( p->flags & AVRPART_HAS_PDI ) ? MTYPE_EEPROM : MTYPE_EEPROM_PAGE;
     PDATA(pgm)->eeprom_pageaddr = (unsigned long)-1L;
-    page_size = PDATA(pgm)->eeprom_pagesize;
   } else if ( ( strcmp(m->desc, "usersig") == 0 ) ) {
     cmd[1] = MTYPE_USERSIG;
   } else if ( ( strcmp(m->desc, "boot") == 0 ) ) {
@@ -2136,8 +2251,11 @@ static int jtagmkII_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
 
   addr += mem->offset;
   cmd[1] = ( p->flags & AVRPART_HAS_PDI ) ? MTYPE_FLASH : MTYPE_FLASH_PAGE;
-  if (strcmp(mem->desc, "flash") == 0) {
+  if (strcmp(mem->desc, "flash") == 0 ||
-    pagesize = mem->page_size;
+      strcmp(mem->desc, "application") == 0 ||
+      strcmp(mem->desc, "apptable") == 0 ||
+      strcmp(mem->desc, "boot") == 0) {
+    pagesize = PDATA(pgm)->flash_pagesize;
     paddr = addr & ~(pagesize - 1);
     paddr_ptr = &PDATA(pgm)->flash_pageaddr;
     cache_ptr = PDATA(pgm)->flash_pagecache;
@@ -3771,6 +3889,7 @@ void jtagmkII_initpgm(PROGRAMMER * pgm)
    */
   pgm->paged_write    = jtagmkII_paged_write;
   pgm->paged_load     = jtagmkII_paged_load;
+  pgm->page_erase     = jtagmkII_page_erase;
   pgm->print_parms    = jtagmkII_print_parms;
   pgm->set_sck_period = jtagmkII_set_sck_period;
   pgm->parseextparams = jtagmkII_parseextparms;
@@ -3837,6 +3956,7 @@ void jtagmkII_pdi_initpgm(PROGRAMMER * pgm)
    */
   pgm->paged_write    = jtagmkII_paged_write;
   pgm->paged_load     = jtagmkII_paged_load;
+  pgm->page_erase     = jtagmkII_page_erase;
   pgm->print_parms    = jtagmkII_print_parms;
   pgm->setup          = jtagmkII_setup;
   pgm->teardown       = jtagmkII_teardown;
@@ -3869,6 +3989,7 @@ void jtagmkII_dragon_initpgm(PROGRAMMER * pgm)
    */
   pgm->paged_write    = jtagmkII_paged_write;
   pgm->paged_load     = jtagmkII_paged_load;
+  pgm->page_erase     = jtagmkII_page_erase;
   pgm->print_parms    = jtagmkII_print_parms;
   pgm->set_sck_period = jtagmkII_set_sck_period;
   pgm->parseextparams = jtagmkII_parseextparms;
@@ -3969,6 +4090,7 @@ void jtagmkII_dragon_pdi_initpgm(PROGRAMMER * pgm)
    */
   pgm->paged_write    = jtagmkII_paged_write;
   pgm->paged_load     = jtagmkII_paged_load;
+  pgm->page_erase     = jtagmkII_page_erase;
   pgm->print_parms    = jtagmkII_print_parms;
   pgm->setup          = jtagmkII_setup;
   pgm->teardown       = jtagmkII_teardown;

main.c

@@ -315,11 +315,8 @@ int main(int argc, char * argv [])
   /* options / operating mode variables */
   int     erase;       /* 1=erase chip, 0=don't */
   int     calibrate;   /* 1=calibrate RC oscillator, 0=don't */
-  int     auto_erase;  /* 0=never erase unless explicity told to do
-                          so, 1=erase if we are going to program flash */
   char  * port;        /* device port (/dev/xxx) */
   int     terminal;    /* 1=enter terminal mode, 0=don't */
-  int     nowrite;     /* don't actually write anything to the chip */
   int     verify;      /* perform a verify operation */
   char  * exitspecs;   /* exit specs string from command line */
   char  * programmer;  /* programmer id */
@@ -336,6 +333,7 @@ int main(int argc, char * argv [])
   int     silentsafe;  /* Don't ask about fuses, 1=silent, 0=normal */
   int     init_ok;     /* Device initialization worked well */
   int     is_open;     /* Device open succeeded */
+  enum updateflags uflags = UF_AUTO_ERASE; /* Flags for do_op() */
   unsigned char safemode_lfuse = 0xff;
   unsigned char safemode_hfuse = 0xff;
   unsigned char safemode_efuse = 0xff;
@@ -397,11 +395,9 @@ int main(int argc, char * argv [])
   port          = NULL;
   erase         = 0;
   calibrate     = 0;
-  auto_erase    = 1;
   p             = NULL;
   ovsigck       = 0;
   terminal      = 0;
-  nowrite       = 0;
   verify        = 1;        /* on by default */
   quell_progress = 0;
   exitspecs     = NULL;
@@ -508,11 +504,12 @@ int main(int argc, char * argv [])
         break;
 
       case 'D': /* disable auto erase */
-        auto_erase = 0;
+        uflags &= ~UF_AUTO_ERASE;
         break;
 
       case 'e': /* perform a chip erase */
         erase = 1;
+        uflags &= ~UF_AUTO_ERASE;
         break;
 
       case 'E':
@@ -524,7 +521,7 @@ int main(int argc, char * argv [])
         break;
 
       case 'n':
-        nowrite = 1;
+        uflags |= UF_NOWRITE;
         break;
 
       case 'O': /* perform RC oscillator calibration */
@@ -844,7 +841,6 @@ int main(int argc, char * argv [])
 
   if(p->flags & AVRPART_AVR32) {
     safemode = 0;
-    auto_erase = 0;
   }
 
   if(p->flags & (AVRPART_HAS_PDI | AVRPART_HAS_TPI)) {
@@ -1131,23 +1127,36 @@ int main(int argc, char * argv [])
     }
   }
 
-  if ((erase == 0) && (auto_erase == 1)) {
+  if (uflags & UF_AUTO_ERASE) {
-    AVRMEM * m;
+    if ((p->flags & AVRPART_HAS_PDI) && pgm->page_erase != NULL &&
-    for (ln=lfirst(updates); ln; ln=lnext(ln)) {
+        lsize(updates) > 0) {
-      upd = ldata(ln);
+      if (quell_progress < 2) {
-      m = avr_locate_mem(p, upd->memtype);
+        fprintf(stderr,
-      if (m == NULL)
+                "%s: NOTE: Programmer supports page erase for Xmega devices.\n"
-        continue;
+                "%sEach page will be erased before programming it, but no chip erase is performed.\n"
-      if ((strcasecmp(m->desc, "flash") == 0) && (upd->op == DEVICE_WRITE)) {
+                "%sTo disable page erases, specify the -D option; for a chip-erase, use the -e option.\n",
-        erase = 1;
+                progname, progbuf, progbuf);
-        if (quell_progress < 2) {
+      }
-          fprintf(stderr,
+    } else {
-                "%s: NOTE: FLASH memory has been specified, an erase cycle "
+      AVRMEM * m;
-                "will be performed\n"
+      const char *memname = (p->flags & AVRPART_HAS_PDI)? "application": "flash";
-                "%sTo disable this feature, specify the -D option.\n",
+      for (ln=lfirst(updates); ln; ln=lnext(ln)) {
-                progname, progbuf);
+        upd = ldata(ln);
+        m = avr_locate_mem(p, upd->memtype);
+        if (m == NULL)
+          continue;
+        if ((strcasecmp(m->desc, memname) == 0) && (upd->op == DEVICE_WRITE)) {
+          erase = 1;
+          uflags &= ~UF_AUTO_ERASE;
+          if (quell_progress < 2) {
+            fprintf(stderr,
+                    "%s: NOTE: \"%s\" memory has been specified, an erase cycle "
+                    "will be performed\n"
+                    "%sTo disable this feature, specify the -D option.\n",
+                    progname, memname, progbuf);
+          }
+          break;
         }
-        break;
       }
     }
   }
@@ -1199,7 +1208,7 @@ int main(int argc, char * argv [])
      * erase the chip's flash and eeprom memories, this is required
      * before the chip can accept new programming
      */
-    if (nowrite) {
+    if (uflags & UF_NOWRITE) {
       fprintf(stderr,
 	      "%s: conflicting -e and -n options specified, NOT erasing chip\n",
 	      progname);
@@ -1230,7 +1239,7 @@ int main(int argc, char * argv [])
 
   for (ln=lfirst(updates); ln; ln=lnext(ln)) {
     upd = ldata(ln);
-    rc = do_op(pgm, p, upd, nowrite);
+    rc = do_op(pgm, p, upd, uflags);
     if (rc) {
       exitrc = 1;
       break;

pgm.h

@@ -109,6 +109,8 @@ typedef struct programmer_t {
   int  (*paged_load)     (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
                           unsigned int page_size, unsigned int baseaddr,
                           unsigned int n_bytes);
+  int  (*page_erase)     (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
+                          unsigned int baseaddr);
   void (*write_setup)    (struct programmer_t * pgm, AVRPART * p, AVRMEM * m);
   int  (*write_byte)     (struct programmer_t * pgm, AVRPART * p, AVRMEM * m,
                           unsigned long addr, unsigned char value);

stk500v2.c

@@ -1171,8 +1171,12 @@ static int stk500hv_initialize(PROGRAMMER * pgm, AVRPART * p, enum hvmode mode)
   for (ln = lfirst(p->mem); ln; ln = lnext(ln)) {
     m = ldata(ln);
     if (strcmp(m->desc, "flash") == 0) {
-      if (m->page_size > 0)
+      if (m->page_size > 0) {
-	PDATA(pgm)->flash_pagesize = m->page_size;
+        if (m->page_size > 256)
+          PDATA(pgm)->flash_pagesize = 256;
+        else
+          PDATA(pgm)->flash_pagesize = m->page_size;
+      }
     } else if (strcmp(m->desc, "eeprom") == 0) {
       if (m->page_size > 0)
 	PDATA(pgm)->eeprom_pagesize = m->page_size;
@@ -1456,9 +1460,7 @@ static int stk500hv_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
   if (strcmp(mem->desc, "flash") == 0) {
     buf[0] = mode == PPMODE? CMD_READ_FLASH_PP: CMD_READ_FLASH_HVSP;
     cmdlen = 3;
-    pagesize = mem->page_size;
+    pagesize = PDATA(pgm)->flash_pagesize;
-    if (pagesize == 0)
-      pagesize = 2;
     paddr = addr & ~(pagesize - 1);
     paddr_ptr = &PDATA(pgm)->flash_pageaddr;
     cache_ptr = PDATA(pgm)->flash_pagecache;
@@ -1587,9 +1589,7 @@ static int stk500hv_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
 
   if (strcmp(mem->desc, "flash") == 0) {
     buf[0] = mode == PPMODE? CMD_PROGRAM_FLASH_PP: CMD_PROGRAM_FLASH_HVSP;
-    pagesize = mem->page_size;
+    pagesize = PDATA(pgm)->flash_pagesize;
-    if (pagesize == 0)
-      pagesize = 2;
     paddr = addr & ~(pagesize - 1);
     paddr_ptr = &PDATA(pgm)->flash_pageaddr;
     cache_ptr = PDATA(pgm)->flash_pagecache;

update.c

@@ -216,7 +216,7 @@ void free_update(UPDATE * u)
 }
 
 
-int do_op(PROGRAMMER * pgm, struct avrpart * p, UPDATE * upd, int nowrite)
+int do_op(PROGRAMMER * pgm, struct avrpart * p, UPDATE * upd, enum updateflags flags)
 {
   struct avrpart * v;
   AVRMEM * mem;
@@ -239,7 +239,7 @@ int do_op(PROGRAMMER * pgm, struct avrpart * p, UPDATE * upd, int nowrite)
             progname, mem->desc);
 	  }
     report_progress(0,1,"Reading");
-    rc = avr_read(pgm, p, upd->memtype, 0, 1);
+    rc = avr_read(pgm, p, upd->memtype, 0);
     if (rc < 0) {
       fprintf(stderr, "%s: failed to read all of %s memory, rc=%d\n",
               progname, mem->desc, rc);
@@ -288,9 +288,9 @@ int do_op(PROGRAMMER * pgm, struct avrpart * p, UPDATE * upd, int nowrite)
             progname, mem->desc, size);
 	  }
 
-    if (!nowrite) {
+    if (!(flags & UF_NOWRITE)) {
       report_progress(0,1,"Writing");
-      rc = avr_write(pgm, p, upd->memtype, size, 1);
+      rc = avr_write(pgm, p, upd->memtype, size, (flags & UF_AUTO_ERASE) != 0);
       report_progress(1,1,NULL);
     }
     else {
@@ -346,7 +346,7 @@ int do_op(PROGRAMMER * pgm, struct avrpart * p, UPDATE * upd, int nowrite)
     }
 
     report_progress (0,1,"Reading");
-    rc = avr_read(pgm, p, upd->memtype, v, 1);
+    rc = avr_read(pgm, p, upd->memtype, v);
     if (rc < 0) {
       fprintf(stderr, "%s: failed to read all of %s memory, rc=%d\n",
               progname, mem->desc, rc);

update.h

@@ -29,6 +29,12 @@ enum {
   DEVICE_VERIFY
 };
 
+enum updateflags {
+  UF_NONE = 0,
+  UF_NOWRITE = 1,
+  UF_AUTO_ERASE = 2,
+};
+
 
 typedef struct update_t {
   char * memtype;
@@ -47,7 +53,7 @@ extern UPDATE * new_update(int op, char * memtype, int filefmt,
 			   char * filename);
 extern void free_update(UPDATE * upd);
 extern int do_op(PROGRAMMER * pgm, struct avrpart * p, UPDATE * upd,
-		 int nowrite);
+		 enum updateflags flags);
 
 #ifdef __cplusplus
 }