Prefix pin config entries in the config file with a "c:". Later, I

might make part descriptions read in this way and we can use a
different letter for those (p).  This will make the parsing easier to
distinguish between the entry types.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@69 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
bsd 2001-09-20 03:19:31 +00:00
parent 2962b3785b
commit b82abdaf2c
3 changed files with 96 additions and 16 deletions

View File

@ -125,8 +125,11 @@ Atmel AVR serial program method.
.It Fl C Ar Config-File
Use the specified config file to locate the desired pin configuration.
Pin configurations are specified in the config file using a colon
seperated field format. The configuration name is the first field,
the remaining fields are of the form:
seperated field format. The configuration entry type is the first
field and currently must be
.Ar c:
The configuration name is the second field, and the remaining fields
are of the form:
.Ar PIN=VALUE ,
where
.Ar PIN
@ -135,8 +138,11 @@ can be
The value is the pin number of the PC parallel port assigned to that
function. The
.Ar VCC
pin can take multible values seperated by a comma. It's value(s) must
come from pins 2 through 9. The default configuration file is
pin can take on multiple values seperated by a comma (which are or'd
together to create a bit mask).
.Ar VCC
pin numbers must come from pins 2 through 9. The default
configuration file is
.Pa /usr/local/etc/avrprog.conf .
.It Fl e
Causes a chip erase to be executed. This will reset the contents of the
@ -304,7 +310,10 @@ Give a short on-line summary of the available commands.
Leave terminal mode and thus
.Nm avrprog .
.El
.Ss Parallel port pin connections
.Ss Default Parallel port pin connections
(these can be changed, see the
.Fl c
option)
.TS
ll.
\fBPin number\fP \fBFunction\fP
@ -325,6 +334,8 @@ ll.
.It Pa /dev/ppi0
default device to be used for communication with the programming
hardware
.It Pa /usr/local/etc/avrprog.conf.sample
sample pin configuration file
.It Pa /usr/local/etc/avrprog.conf
default pin configuration file
.It Pa ~/.inputrc

View File

@ -3,25 +3,25 @@
# Programmer Pin Configurations
#
# The format of these entries is as follows:
# name:[desc=<description>:][[<pin>=<value>:]...]
# c:<name>:[desc=<description>:][[<pin>=<value>:]...]
#
# Example: for a programmer called PGM-1 that uses pin 2 and 3 for
# power, pins 4, 5, and 6 for RESET, SCK, and MOSI, and pin 10 for
# MISO, we could use the following entry:
#
# pgm-1 : desc=Programmer 1:vcc=2,3:reset=4:sck=5:mosi=6:miso=10
# c:pgm-1 : desc=Programmer 1:vcc=2,3:reset=4:sck=5:mosi=6:miso=10
#
# Continuation lines are supported, use a backslash (\) as the last
# character of the line and the next line will included as part of the
# configuration data.
#
bsd : desc=Brian Dean's programmer:vcc=2,3,4,5:reset=7:sck=8:\
c:bsd : desc=Brian Dean's programmer:vcc=2,3,4,5:reset=7:sck=8:\
mosi=9:miso=10
dt006 : desc=Dontronics DT006:reset=4:sck=5:mosi=2:miso=11
c:dt006 : desc=Dontronics DT006:reset=4:sck=5:mosi=2:miso=11
alf : desc=Tony Freibel's programmer:vcc=2,3,4,5:buff=6:\
c:alf : desc=Tony Freibel's programmer:vcc=2,3,4,5:buff=6:\
reset=7:sck=8:mosi=9:miso=10:errled=1:rdyled=14:pgmled=16:\
vfyled=17

75
main.c
View File

@ -264,7 +264,6 @@ int print_module_versions ( FILE * outf, char * timestamp )
}
#define MAX_LINE_LEN 1024
#define MAX_PIN_NAME 64
@ -457,6 +456,7 @@ int read_config(char * infile, char * config, unsigned int * pinno,
lineno = 0;
buf[0] = 0;
cont = 0;
while (fgets(line, MAX_LINE_LEN, f) != NULL) {
lineno++;
@ -464,6 +464,9 @@ int read_config(char * infile, char * config, unsigned int * pinno,
while (isspace(*p))
p++;
/*
* skip empty lines and lines that start with '#'
*/
if ((*p == '#')||(*p == '\n')||(*p == 0))
continue;
@ -473,6 +476,37 @@ int read_config(char * infile, char * config, unsigned int * pinno,
len--;
}
/*
* we're only interested in pin configuration data which begin
* with "c:"
*/
if (((len < 3) || (p[0] != 'c')) && !cont)
continue;
/*
* skip over the "c:"
*/
if (!cont) {
p++;
while (*p && isspace(*p))
p++;
if (*p != ':') {
fprintf(stderr, "line %d:\n%s\n",
lineno, line);
for (i=0; i<(p-line); i++) {
fprintf(stderr, "-");
}
fprintf(stderr, "^\n");
fprintf(stderr, "error at column %d, line %d of %s: expecting ':'\n",
p-line+1, lineno, infile);
return -1;
}
p++;
len = strlen(p);
}
cont = 0;
if (p[len-1] == '\\') {
@ -547,12 +581,47 @@ int read_config(char * infile, char * config, unsigned int * pinno,
static char vccpins_buf[64];
char * vccpins_str(unsigned int pmask)
{
unsigned int mask;
int pin;
char b2[8];
char * b;
b = vccpins_buf;
b[0] = 0;
for (pin = 2, mask = 1; mask < 0x80; mask = mask << 1, pin++) {
if (pmask & mask) {
sprintf(b2, "%d", pin);
if (b[0] != 0)
strcat(b, ",");
strcat(b, b2);
}
}
return b;
}
void pinconfig_display(char * p, char * config, char * desc)
{
char vccpins[64];
if (pinno[PPI_AVR_VCC]) {
snprintf(vccpins, sizeof(vccpins), " = pins %s",
vccpins_str(pinno[PPI_AVR_VCC]));
}
else {
vccpins[0] = 0;
}
fprintf(stderr, "%sProgrammer Pin Configuration: %s (%s)\n", p,
config ? config : "DEFAULT", desc);
fprintf(stderr,
"%s VCC = 0x%02x\n"
"%s VCC = 0x%02x %s\n"
"%s BUFF = %d\n"
"%s RESET = %d\n"
"%s SCK = %d\n"
@ -562,7 +631,7 @@ void pinconfig_display(char * p, char * config, char * desc)
"%s RDY LED = %d\n"
"%s PGM LED = %d\n"
"%s VFY LED = %d\n",
p, pinno[PPI_AVR_VCC],
p, pinno[PPI_AVR_VCC], vccpins,
p, pinno[PIN_AVR_BUFF],
p, pinno[PIN_AVR_RESET],
p, pinno[PIN_AVR_SCK],