From b5909a4070e6b00107aafe990504b3a637a61752 Mon Sep 17 00:00:00 2001
From: bdean <bdean@81a1dc3b-b13d-400b-aceb-764788c761c2>
Date: Wed, 22 Dec 2004 01:24:39 +0000
Subject: [PATCH] Add support for the AT90CAN128. Not sure if all the
instruction encoding is correct, specifically the address bits don't exactly
match those of the preliminary datasheet that I have, but I don't see how
they could be right. Tested with STK500 and it works there. Instruction
encodings have not been tested due to lack of a parallel port on my Mac.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@436 81a1dc3b-b13d-400b-aceb-764788c761c2
---
avrdude.conf.in | 123 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/avrdude.conf.in b/avrdude.conf.in
index 8938c4c2..13843b99 100644
--- a/avrdude.conf.in
+++ b/avrdude.conf.in
@@ -1658,6 +1658,129 @@ part
;
;
+#------------------------------------------------------------
+# AT90CAN128
+#------------------------------------------------------------
+
+part
+ id = "c128";
+ desc = "AT90CAN128";
+ stk500_devcode = 0xB3;
+# avr910_devcode = 0x43;
+ chip_erase_delay = 9000;
+ pagel = 0xD7;
+ bs2 = 0xA0;
+ reset = dedicated;
+ pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
+ "x x x x x x x x x x x x x x x x";
+
+ chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
+ "x x x x x x x x x x x x x x x x";
+
+ memory "eeprom"
+ paged = no; /* leave this "no" */
+ page_size = 8; /* for parallel programming */
+ size = 4096;
+ min_write_delay = 9000;
+ max_write_delay = 9000;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read = " 1 0 1 0 0 0 0 0",
+ " 0 0 0 x a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ write = " 1 1 0 0 0 0 0 0",
+ " 0 0 0 x a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+ ;
+
+ memory "flash"
+ paged = yes;
+ size = 131072;
+ page_size = 256;
+ num_pages = 512;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read_lo = " 0 0 1 0 0 0 0 0",
+ "a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ read_hi = " 0 0 1 0 1 0 0 0",
+ "a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ loadpage_lo = " 0 1 0 0 0 0 0 0",
+ " 0 0 0 x x x x x",
+ " x a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_hi = " 0 1 0 0 1 0 0 0",
+ " 0 0 0 x x x x x",
+ " x a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 0 1 0 0 1 1 0 0",
+ "a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 x x x x x x x",
+ " x x x x x x x x";
+ ;
+
+ memory "lfuse"
+ size = 1;
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
+ "x x x x x x x x i i i i i i i i";
+
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+ ;
+
+ memory "hfuse"
+ size = 1;
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
+ "x x x x x x x x i i i i i i i i";
+
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+ ;
+
+ memory "efuse"
+ size = 1;
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
+ "x x x x x x x x x x x x i i i i";
+
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+ ;
+
+ memory "lock"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x x x o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
+ "x x x x x x x x 1 1 i i i i i i";
+ ;
+
+ memory "calibration"
+ size = 1;
+ read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+ ;
+
+ memory "signature"
+ size = 3;
+ read = "0 0 1 1 0 0 0 0 x x x x x x x x",
+ "x x x x x x a1 a0 o o o o o o o o";
+ ;
+ ;
+
+
#------------------------------------------------------------
# ATmega16
#------------------------------------------------------------