Document the pwroff_after_write flag.

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk@125 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Brian S. Dean 2002-02-14 02:59:39 +00:00
parent 6f3f17ff0c
commit ad097bee72
1 changed files with 10 additions and 0 deletions

View File

@ -41,6 +41,7 @@
# max_write_delay = <num> ; # micro-seconds # max_write_delay = <num> ; # micro-seconds
# readback_p1 = <num> ; # byte value # readback_p1 = <num> ; # byte value
# readback_p2 = <num> ; # byte value # readback_p2 = <num> ; # byte value
# pwroff_after_write = <yes/no> ; # yes / no
# read = <instruction format> ; # read = <instruction format> ;
# write = <instruction format> ; # write = <instruction format> ;
# read_lo = <instruction format> ; # read_lo = <instruction format> ;
@ -66,6 +67,15 @@
# fuse), "signature", "calibration", "lock" # fuse), "signature", "calibration", "lock"
# * The memory type specified on the avrprog command line must match # * The memory type specified on the avrprog command line must match
# one of the memory types defined for the specified chip. # one of the memory types defined for the specified chip.
# * The pwroff_after_write flag causes avrprog to attempt to
# power the device off and back on after an unsuccessful write to
# the affected memory area if VCC programmer pins are defined. If
# VCC pins are not defined for the programmer, a message
# indicating that the device needs a power-cycle is printed out.
# This flag was added to work around a problem with the
# at90s4433/2333's; see the at90s4433 errata at:
#
# http://www.atmel.com/atmel/acrobat/doc1280.pdf
# #
# INSTRUCTION FORMATS # INSTRUCTION FORMATS
# #