* main.c: revert to rev 1159 (doing pgm_display after pgm_open)

* avrpart.[ch]: moved avr_pin_name to pindefs.[ch]
* pgm.c: moved pins_to_str to pindefs.[ch], added initialization of 
          new pin definitions in pgm_new()
* pindefs.[ch]: added moved functions from other files, added a lot of 
          documentation, reformatted files using astyle to have consistent spacing,
          added a new generic check function for pins
* ft245r.c: used new generic pin check function

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1161 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Rene Liebscher 2013-05-05 13:35:35 +00:00
parent 2d8c584c8c
commit a816d19d02
8 changed files with 410 additions and 147 deletions

View File

@ -1,3 +1,14 @@
2013-05-05 Rene Liebscher <R.Liebscher@gmx.de>
* main.c: revert to rev 1159 (doing pgm_display after pgm_open)
* avrpart.[ch]: moved avr_pin_name to pindefs.[ch]
* pgm.c: moved pins_to_str to pindefs.[ch], added initialization of
new pin definitions in pgm_new()
* pindefs.[ch]: added moved functions from other files, added a lot of
documentation, reformatted files using astyle to have consistent spacing,
added a new generic check function for pins
* ft245r.c: used new generic pin check function
2013-05-03 Rene Liebscher <R.Liebscher@gmx.de>
Create new pin definition data structures to support 0-based pin numbers,

View File

@ -595,24 +595,6 @@ static char * reset_disp_str(int r)
}
const char * avr_pin_name(int pinno)
{
switch (pinno) {
case PPI_AVR_VCC : return "VCC";
case PPI_AVR_BUFF : return "BUFF";
case PIN_AVR_RESET : return "RESET";
case PIN_AVR_SCK : return "SCK";
case PIN_AVR_MOSI : return "MOSI";
case PIN_AVR_MISO : return "MISO";
case PIN_LED_ERR : return "ERRLED";
case PIN_LED_RDY : return "RDYLED";
case PIN_LED_PGM : return "PGMLED";
case PIN_LED_VFY : return "VFYLED";
default : return "<unknown>";
}
}
void avr_display(FILE * f, AVRPART * p, const char * prefix, int verbose)
{
int i;

View File

@ -222,7 +222,6 @@ void avr_free_part(AVRPART * d);
AVRPART * locate_part(LISTID parts, char * partdesc);
AVRPART * locate_part_by_avr910_devcode(LISTID parts, int devcode);
void avr_display(FILE * f, AVRPART * p, const char * prefix, int verbose);
const char * avr_pin_name(int);
typedef void (*walk_avrparts_cb)(const char *name, const char *desc,
const char *cfgname, int cfglineno,

View File

@ -328,34 +328,6 @@ static int ft245r_read_sig_bytes(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m) {
return 3;
}
static int ft245r_check_pins(PROGRAMMER * pgm){
static const int pinlist[] = {PIN_AVR_SCK,PIN_AVR_MOSI,PIN_AVR_MISO,PIN_AVR_RESET,PPI_AVR_BUFF};
static const pinmask_t valid_pins[PIN_FIELD_SIZE] = { 0x000000ff }; // only lower 8 pins are allowed
pinmask_t already_used[PIN_FIELD_SIZE] = {0};
int i,j;
for( i=0; i<sizeof(pinlist)/sizeof(pinlist[0]); i++){
for( j=0; j<PIN_FIELD_SIZE; j++){
// check if it does not use any non valid pins
if(pgm->pin[pinlist[i]].mask[j] & ~valid_pins[j]){
fprintf(stderr,
"%s: at least one pin is not a valid pin number\n",
progname);
exit(1);
}
// check if it does not use same pins as other function
if(pgm->pin[pinlist[i]].mask[j] & already_used[j]){
fprintf(stderr,
"%s: at least one pin is set for multiple functions.\n",
progname);
exit(1);
}
already_used[j] |= pgm->pin[pinlist[i]].mask[j];
}
}
return 0;
}
/*
* initialize the AVR device and prepare it to accept commands
*/
@ -456,12 +428,26 @@ static int ft245r_cmd(PROGRAMMER * pgm, unsigned char cmd[4],
return 0;
}
/* lower 8 pins are accepted, they might be also inverted */
static const struct pindef_t valid_pins = {{0xff},{0xff}} ;
static const struct pin_checklist_t pin_checklist[] = {
{ PIN_AVR_SCK, 1, &valid_pins},
{ PIN_AVR_MOSI, 1, &valid_pins},
{ PIN_AVR_MISO, 1, &valid_pins},
{ PIN_AVR_RESET,1, &valid_pins},
{ PPI_AVR_BUFF, 0, &valid_pins},
};
static int ft245r_open(PROGRAMMER * pgm, char * port) {
int rv;
int devnum = -1;
ft245r_check_pins(pgm);
rv = pins_check(pgm,pin_checklist,sizeof(pin_checklist)/sizeof(pin_checklist[0]));
if(rv) {
pgm->display(pgm, progbuf);
return rv;
}
strcpy(pgm->port, port);
@ -556,6 +542,7 @@ static int ft245r_open(PROGRAMMER * pgm, char * port) {
static void ft245r_close(PROGRAMMER * pgm) {
if (handle) {
// I think the switch to BB mode and back flushes the buffer.
ftdi_set_bitmode(handle, 0, BITMODE_SYNCBB); // set Synchronous BitBang, all in puts
ftdi_set_bitmode(handle, 0, BITMODE_RESET); // disable Synchronous BitBang
@ -564,6 +551,8 @@ static void ft245r_close(PROGRAMMER * pgm) {
ftdi_usb_close(handle);
ftdi_deinit (handle);
free(handle);
handle = NULL;
}
}
static void ft245r_display(PROGRAMMER * pgm, const char * p) {
@ -849,6 +838,8 @@ void ft245r_initpgm(PROGRAMMER * pgm) {
pgm->paged_load = ft245r_paged_load;
pgm->read_sig_bytes = ft245r_read_sig_bytes;
handle = NULL;
}
#else

12
main.c
View File

@ -921,12 +921,6 @@ int main(int argc, char * argv [])
pgm->ispdelay = ispdelay;
}
if (verbose) {
avr_display(stderr, p, progbuf, verbose);
fprintf(stderr, "\n");
programmer_display(pgm, progbuf);
}
rc = pgm->open(pgm, port);
if (rc < 0) {
exitrc = 1;
@ -957,6 +951,12 @@ int main(int argc, char * argv [])
goto main_exit;
}
if (verbose) {
avr_display(stderr, p, progbuf, verbose);
fprintf(stderr, "\n");
programmer_display(pgm, progbuf);
}
if (quell_progress < 2) {
fprintf(stderr, "\n");
}

32
pgm.c
View File

@ -83,8 +83,10 @@ PROGRAMMER * pgm_new(void)
pgm->baudrate = 0;
pgm->initpgm = NULL;
for (i=0; i<N_PINS; i++)
for (i=0; i<N_PINS; i++) {
pgm->pinno[i] = 0;
pin_clear_all(&(pgm->pin[i]));
}
/*
* mandatory functions - these are called without checking to see
@ -211,34 +213,6 @@ void programmer_display(PROGRAMMER * pgm, const char * p)
pgm->display(pgm, p);
}
static char * pins_to_str(const struct pindef_t * const pindef)
{
static char buf[(PIN_MAX+1)*5]; // should be enough for PIN_MAX=255
char *p = buf;
int n;
int pin;
const char * fmt;
buf[0] = 0;
for (pin = PIN_MIN; pin <= PIN_MAX; pin++) {
int index = pin/PIN_FIELD_ELEMENT_SIZE;
int bit = pin%PIN_FIELD_ELEMENT_SIZE;
if (pindef->mask[index] & (1 << bit)) {
if (pindef->inverse[index] & (1 << bit)) {
fmt = (buf[0]==0)?"~%d":",~%d";
} else {
fmt = (buf[0]==0)?" %d":",%d";
}
n = sprintf(p, fmt, pin);
p += n;
}
}
if (buf[0] == 0)
return " (not used)";
return buf;
}
void pgm_display_generic_mask(PROGRAMMER * pgm, const char * p, unsigned int show)
{

236
pindefs.c
View File

@ -21,6 +21,7 @@
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include "avrdude.h"
#include "pindefs.h"
#include "pgm.h"
@ -34,11 +35,12 @@
void pin_set_value(struct pindef_t * const pindef, const int pin, const bool inverse) {
pindef->mask[pin / PIN_FIELD_ELEMENT_SIZE] |= 1 << (pin % PIN_FIELD_ELEMENT_SIZE);
if (inverse)
if(inverse) {
pindef->inverse[pin / PIN_FIELD_ELEMENT_SIZE] |= (1 << (pin % PIN_FIELD_ELEMENT_SIZE));
else
} else {
pindef->inverse[pin / PIN_FIELD_ELEMENT_SIZE] &= ~(1 << (pin % PIN_FIELD_ELEMENT_SIZE));
}
}
/**
* Clear all defined pins in pindef.
@ -124,3 +126,233 @@ void pgm_fill_old_pins(struct programmer_t * const pgm) {
pin_fill_old_pinno(&(pgm->pin[PIN_LED_VFY]), &(pgm->pinno[PIN_LED_VFY]));
}
/**
* This function returns a string representation of pins in the mask eg. 1,3,5-7,9,12
* Another execution of this function will overwrite the previous result in the static buffer.
* Consecutive pin number are representated as start-end.
*
* @param[in] pinmask the pin mask for which we want the string representation
* @returns pointer to a static string.
*/
const char * pinmask_to_str(const pinmask_t * const pinmask) {
static char buf[(PIN_MAX + 1) * 5]; // should be enough for PIN_MAX=255
char *p = buf;
int n;
int pin;
const char * fmt;
int start = -1;
int end = -1;
buf[0] = 0;
for(pin = PIN_MIN; pin <= PIN_MAX; pin++) {
int index = pin / PIN_FIELD_ELEMENT_SIZE;
int bit = pin % PIN_FIELD_ELEMENT_SIZE;
if(pinmask[index] & (1 << bit)) {
bool output = false;
if(start == -1) {
output = true;
start = pin;
end = start;
} else if(pin == end + 1) {
end = pin;
} else {
if(start != end) {
n = sprintf(p, "-%d", end);
p += n;
}
output = true;
start = pin;
end = start;
}
if(output) {
fmt = (buf[0] == 0) ? "%d" : ",%d";
n = sprintf(p, fmt, pin);
p += n;
}
}
}
if(start != end) {
n = sprintf(p, "-%d", end);
p += n;
}
if(buf[0] == 0)
return "(no pins)";
return buf;
}
/**
* This function checks all pin of pgm against the constraints given in the checklist.
* It checks if
* @li any invalid pins are used
* @li valid pins are used inverted when not allowed
* @li any pins are used by more than one function
* @li any mandatory pin is not set all.
*
* In case of any error it report the wrong function and the pin numbers.
* For verbose >= 2 it also reports the possible correct values.
* For verbose >=3 it shows also which pins were ok.
*
* @param[in] pgm the programmer to check
* @param[in] checklist the constraint for the pins
* @param[in] size the number of entries in checklist
* @returns 0 if all pin definitions are valid, -1 otherwise
*/
int pins_check(const struct programmer_t * const pgm, const struct pin_checklist_t * const checklist, const int size) {
static const struct pindef_t no_valid_pins = {{0}, {0}}; // default value if check list does not contain anything else
int rv = 0; // return value
int pinname; // loop counter through pinnames
pinmask_t already_used_all[PIN_FIELD_SIZE] = {0}; // collect pin definitions of all pin names for check of double use
// loop over all possible pinnames
for(pinname = 0; pinname < N_PINS; pinname++) {
bool used = false;
bool invalid = false;
bool inverse = false;
int index;
int segment;
bool mandatory_used = false;
pinmask_t invalid_used[PIN_FIELD_SIZE] = {0};
pinmask_t inverse_used[PIN_FIELD_SIZE] = {0};
pinmask_t already_used[PIN_FIELD_SIZE] = {0};
const struct pindef_t * valid_pins = &no_valid_pins;
bool is_mandatory = false;
bool is_ok = true;
//find corresponding check pattern
for(index = 0; index < size; index++) {
if(checklist[index].pinname == pinname) {
valid_pins = checklist[index].valid_pins;
is_mandatory = checklist[index].mandatory;
break;
}
}
for(segment = 0; segment < PIN_FIELD_SIZE; segment++) {
// check if for mandatory any pin is defined
invalid_used[segment] = pgm->pin[pinname].mask[segment] & ~valid_pins->mask[segment];
if(is_mandatory && (0 != (pgm->pin[pinname].mask[segment] & valid_pins->mask[segment]))) {
mandatory_used = true;
}
// check if it does not use any non valid pins
invalid_used[segment] = pgm->pin[pinname].mask[segment] & ~valid_pins->mask[segment];
if(invalid_used[segment]) {
invalid = true;
}
// check if it does not use any valid pins as inverse if not allowed
inverse_used[segment] = pgm->pin[pinname].inverse[segment] & valid_pins->mask[segment] & ~valid_pins->inverse[segment];
if(inverse_used[segment]) {
inverse = true;
}
// check if it does not use same pins as other function
already_used[segment] = pgm->pin[pinname].mask[segment] & already_used_all[segment];
if(already_used[segment]) {
used = true;
}
already_used_all[segment] |= pgm->pin[pinname].mask[segment];
}
if(invalid) {
fprintf(stderr,
"%s: %s: Following pins are not valid pins for this function: %s\n",
progname, avr_pin_name(pinname), pinmask_to_str(invalid_used));
if(verbose >= 2) {
fprintf(stderr,
"%s: %s: Valid pins for this function are: %s\n",
progname, avr_pin_name(pinname), pinmask_to_str(valid_pins->mask));
}
is_ok = false;
}
if(inverse) {
fprintf(stderr,
"%s: %s: Following pins are not usable as inverse pins for this function: %s\n",
progname, avr_pin_name(pinname), pinmask_to_str(inverse_used));
if(verbose >= 2) {
fprintf(stderr,
"%s: %s: Valid inverse pins for this function are: %s\n",
progname, avr_pin_name(pinname), pinmask_to_str(valid_pins->inverse));
}
is_ok = false;
}
if(used) {
fprintf(stderr,
"%s: %s: Following pins are set for other functions too: %s\n",
progname, avr_pin_name(pinname), pinmask_to_str(already_used));
is_ok = false;
}
if(!mandatory_used && is_mandatory && !invalid) {
fprintf(stderr,
"%s: %s: Mandatory pin is not defined.\n",
progname, avr_pin_name(pinname));
is_ok = false;
}
if(!is_ok) {
rv = -1;
} else if(verbose >= 3) {
fprintf(stderr,
"%s: %s: Pin is ok.\n",
progname, avr_pin_name(pinname));
}
}
return rv;
}
/**
* This function returns a string representation of defined pins eg. ~1,2,~4,~5,7
* Another execution of this function will overwrite the previous result in the static buffer.
*
* @param[in] pindef the pin definition for which we want the string representation
* @returns pointer to a static string.
*/
const char * pins_to_str(const struct pindef_t * const pindef) {
static char buf[(PIN_MAX + 1) * 5]; // should be enough for PIN_MAX=255
char *p = buf;
int n;
int pin;
const char * fmt;
buf[0] = 0;
for(pin = PIN_MIN; pin <= PIN_MAX; pin++) {
int index = pin / PIN_FIELD_ELEMENT_SIZE;
int bit = pin % PIN_FIELD_ELEMENT_SIZE;
if(pindef->mask[index] & (1 << bit)) {
if(pindef->inverse[index] & (1 << bit)) {
fmt = (buf[0] == 0) ? "~%d" : ",~%d";
} else {
fmt = (buf[0] == 0) ? " %d" : ",%d";
}
n = sprintf(p, fmt, pin);
p += n;
}
}
if(buf[0] == 0)
return " (not used)";
return buf;
}
/**
* Returns the name of the pin as string.
*
* @param pinname the pinname which we want as string.
* @returns a string with the pinname, or <unknown> if pinname is invalid.
*/
const char * avr_pin_name(int pinname) {
switch(pinname) {
case PPI_AVR_VCC : return "VCC";
case PPI_AVR_BUFF : return "BUFF";
case PIN_AVR_RESET : return "RESET";
case PIN_AVR_SCK : return "SCK";
case PIN_AVR_MOSI : return "MOSI";
case PIN_AVR_MISO : return "MISO";
case PIN_LED_ERR : return "ERRLED";
case PIN_LED_RDY : return "RDYLED";
case PIN_LED_PGM : return "PGMLED";
case PIN_LED_VFY : return "VFYLED";
default : return "<unknown>";
}
}

View File

@ -110,12 +110,86 @@ struct pindef_t {
pinmask_t inverse[PIN_FIELD_SIZE]; ///< bitfield of inverse/normal usage of used pins
};
/**
* Data structure to define a checklist of valid pins for each function.
*/
struct pin_checklist_t {
int pinname; ///< logical pinname eg. PIN_AVR_SCK
int mandatory; ///< is this a mandatory pin
const struct pindef_t* valid_pins; ///< mask defines allowed pins, inverse define is they might be used inverted
};
/**
* Adds a pin in the pin definition as normal or inverse pin.
*
* @param[out] pindef pin definition to update
* @param[in] pin number of pin [0..PIN_MAX]
* @param[in] inverse inverse (true) or normal (false) pin
*/
void pin_set_value(struct pindef_t * const pindef, const int pin, const bool inverse);
/**
* Clear all defined pins in pindef.
*
* @param[out] pindef pin definition to clear
*/
void pin_clear_all(struct pindef_t * const pindef);
struct programmer_t; /* forward declaration */
/**
* Convert for given programmer new pin definitions to old pin definitions.
*
* @param[inout] pgm programmer whose pins shall be converted.
*/
void pgm_fill_old_pins(struct programmer_t * const pgm);
/**
* This function checks all pin of pgm against the constraints given in the checklist.
* It checks if
* @li any invalid pins are used
* @li valid pins are used inverted when not allowed
* @li any pins are used by more than one function
* @li any mandatory pin is not set all.
*
* In case of any error it report the wrong function and the pin numbers.
* For verbose >= 2 it also reports the possible correct values.
* For verbose >=3 it shows also which pins were ok.
*
* @param[in] pgm the programmer to check
* @param[in] checklist the constraint for the pins
* @param[in] size the number of entries in checklist
* @returns 0 if all pin definitions are valid, -1 otherwise
*/
int pins_check(const struct programmer_t * const pgm, const struct pin_checklist_t * const checklist, const int size);
/**
* Returns the name of the pin as string.
*
* @param pinname the pinname which we want as string.
* @returns a string with the pinname, or <unknown> if pinname is invalid.
*/
const char * avr_pin_name(int pinname);
/**
* This function returns a string representation of defined pins eg. ~1,2,~4,~5,7
* Another execution of this function will overwrite the previous result in the static buffer.
*
* @param[in] pindef the pin definition for which we want the string representation
* @returns pointer to a static string.
*/
const char * pins_to_str(const struct pindef_t * const pindef);
/**
* This function returns a string representation of pins in the mask eg. 1,3,5-7,9,12
* Another execution of this function will overwrite the previous result in the static buffer.
* Consecutive pin number are representated as start-end.
*
* @param[in] pinmask the pin mask for which we want the string representation
* @returns pointer to a static string.
*/
const char * pinmask_to_str(const pinmask_t * const pinmask);
#endif