diff --git a/ChangeLog b/ChangeLog
index 5a869a33..52b1d0f5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,9 @@
+2006-08-10 Eric B. Weddington <eweddington@cso.atmel.com>
+
+ Contributed by Bob Paddock <graceindustries@gmail.com>
+ * avrdude.conf.in: Patch #4780. Provide support for mega325, mega3250,
+ mega645, mega6450.
+
2006-08-10 Joerg Wunsch <j@uriah.heep.sax.de>
* avrdude.conf.in (ATtiny11): fix the HVSP control stack,
diff --git a/avrdude.conf.in b/avrdude.conf.in
index 2c0d941f..af7133f2 100644
--- a/avrdude.conf.in
+++ b/avrdude.conf.in
@@ -8096,3 +8096,646 @@ part
;
;
+#------------------------------------------------------------
+# ATmega325
+#------------------------------------------------------------
+
+part
+ id = "m325";
+ desc = "ATMEGA325";
+ has_jtag = yes;
+# stk500_devcode = 0x??; # No STK500v1 support?
+# avr910_devcode = 0x??; # Try the ATmega16 one
+ avr910_devcode = 0x74;
+ pagel = 0xd7;
+ bs2 = 0xa0;
+ chip_erase_delay = 9000;
+ pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ timeout = 200;
+ stabdelay = 100;
+ cmdexedelay = 25;
+ synchloops = 32;
+ bytedelay = 0;
+ pollindex = 3;
+ pollvalue = 0x53;
+ predelay = 1;
+ postdelay = 1;
+ pollmethod = 1;
+
+ idr = 0x31;
+ spmcr = 0x57;
+ allowfullpagebitstream = no;
+
+ memory "eeprom"
+ paged = no; /* leave this "no" */
+ page_size = 4; /* for parallel programming */
+ size = 1024;
+ min_write_delay = 9000;
+ max_write_delay = 9000;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read = " 1 0 1 0 0 0 0 0",
+ " 0 0 0 0 0 0 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ write = " 1 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_lo = " 1 1 0 0 0 0 0 1",
+ " 0 0 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 1 1 0 0 0 0 1 0",
+ " 0 0 0 0 0 0 a9 a8",
+ " a7 a6 a5 a4 a3 a2 0 0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 4;
+ readsize = 256;
+ ;
+
+ memory "flash"
+ paged = yes;
+ size = 32768;
+ page_size = 128;
+ num_pages = 256;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read_lo = " 0 0 1 0 0 0 0 0",
+ " 0 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ read_hi = " 0 0 1 0 1 0 0 0",
+ " 0 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ loadpage_lo = " 0 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_hi = " 0 1 0 0 1 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 0 1 0 0 1 1 0 0",
+ " 0 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 128;
+ readsize = 256;
+ ;
+
+ memory "lock"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x x x o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 1 1 i i i i i i";
+ ;
+
+ memory "lfuse"
+ size = 1;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "hfuse"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "efuse"
+ size = 1;
+
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
+ "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i";
+ ;
+
+# ATmega325 has Signature Bytes: 0x1E 0x95 0x05.
+ memory "signature"
+ size = 3;
+ read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 a1 a0 o o o o o o o o";
+ ;
+
+ memory "calibration"
+ size = 1;
+
+ read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+ ;
+ ;
+
+#------------------------------------------------------------
+# ATmega645
+#------------------------------------------------------------
+
+part
+ id = "m645";
+ desc = "ATMEGA645";
+ has_jtag = yes;
+# stk500_devcode = 0x??; # No STK500v1 support?
+# avr910_devcode = 0x??; # Try the ATmega16 one
+ avr910_devcode = 0x74;
+ pagel = 0xd7;
+ bs2 = 0xa0;
+ chip_erase_delay = 9000;
+ pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ timeout = 200;
+ stabdelay = 100;
+ cmdexedelay = 25;
+ synchloops = 32;
+ bytedelay = 0;
+ pollindex = 3;
+ pollvalue = 0x53;
+ predelay = 1;
+ postdelay = 1;
+ pollmethod = 1;
+
+ idr = 0x31;
+ spmcr = 0x57;
+ allowfullpagebitstream = no;
+
+ memory "eeprom"
+ paged = no; /* leave this "no" */
+ page_size = 8; /* for parallel programming */
+ size = 2048;
+ min_write_delay = 9000;
+ max_write_delay = 9000;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read = " 1 0 1 0 0 0 0 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ write = " 1 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_lo = " 1 1 0 0 0 0 0 1",
+ " 0 0 0 0 0 0 0 0",
+ " 0 0 0 0 0 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 1 1 0 0 0 0 1 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 0 0 0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 8;
+ readsize = 256;
+ ;
+
+ memory "flash"
+ paged = yes;
+ size = 65536;
+ page_size = 256;
+ num_pages = 256;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read_lo = " 0 0 1 0 0 0 0 0",
+ " a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ read_hi = " 0 0 1 0 1 0 0 0",
+ " a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ loadpage_lo = " 0 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_hi = " 0 1 0 0 1 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 0 1 0 0 1 1 0 0",
+ " a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " 0 0 0 0 0 0 0 0";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 128;
+ readsize = 256;
+ ;
+
+ memory "lock"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x x x o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 1 1 i i i i i i";
+ ;
+
+ memory "lfuse"
+ size = 1;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "hfuse"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "efuse"
+ size = 1;
+
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
+ "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i";
+ ;
+
+# ATmega645 has Signature Bytes: 0x1E 0x96 0x05.
+ memory "signature"
+ size = 3;
+ read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 a1 a0 o o o o o o o o";
+ ;
+
+ memory "calibration"
+ size = 1;
+
+ read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+ ;
+ ;
+
+#------------------------------------------------------------
+# ATmega3250
+#------------------------------------------------------------
+
+part
+ id = "m3250";
+ desc = "ATMEGA3250";
+ has_jtag = yes;
+# stk500_devcode = 0x??; # No STK500v1 support?
+# avr910_devcode = 0x??; # Try the ATmega16 one
+ avr910_devcode = 0x74;
+ pagel = 0xd7;
+ bs2 = 0xa0;
+ chip_erase_delay = 9000;
+ pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ timeout = 200;
+ stabdelay = 100;
+ cmdexedelay = 25;
+ synchloops = 32;
+ bytedelay = 0;
+ pollindex = 3;
+ pollvalue = 0x53;
+ predelay = 1;
+ postdelay = 1;
+ pollmethod = 1;
+
+ idr = 0x31;
+ spmcr = 0x57;
+ allowfullpagebitstream = no;
+
+ memory "eeprom"
+ paged = no; /* leave this "no" */
+ page_size = 4; /* for parallel programming */
+ size = 1024;
+ min_write_delay = 9000;
+ max_write_delay = 9000;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read = " 1 0 1 0 0 0 0 0",
+ " 0 0 0 0 0 0 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ write = " 1 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_lo = " 1 1 0 0 0 0 0 1",
+ " 0 0 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 1 1 0 0 0 0 1 0",
+ " 0 0 0 0 0 0 a9 a8",
+ " a7 a6 a5 a4 a3 a2 0 0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 4;
+ readsize = 256;
+ ;
+
+ memory "flash"
+ paged = yes;
+ size = 32768;
+ page_size = 128;
+ num_pages = 256;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read_lo = " 0 0 1 0 0 0 0 0",
+ " 0 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ read_hi = " 0 0 1 0 1 0 0 0",
+ " 0 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ loadpage_lo = " 0 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_hi = " 0 1 0 0 1 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 0 1 0 0 1 1 0 0",
+ " 0 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 128;
+ readsize = 256;
+ ;
+
+ memory "lock"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x x x o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 1 1 i i i i i i";
+ ;
+
+ memory "lfuse"
+ size = 1;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "hfuse"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "efuse"
+ size = 1;
+
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
+ "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i";
+ ;
+
+# ATmega3250 has Signature Bytes: 0x1E 0x95 0x06.
+ memory "signature"
+ size = 3;
+ read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 a1 a0 o o o o o o o o";
+ ;
+
+ memory "calibration"
+ size = 1;
+
+ read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+ ;
+ ;
+
+#------------------------------------------------------------
+# ATmega6450
+#------------------------------------------------------------
+
+part
+ id = "m6450";
+ desc = "ATMEGA6450";
+ has_jtag = yes;
+# stk500_devcode = 0x??; # No STK500v1 support?
+# avr910_devcode = 0x??; # Try the ATmega16 one
+ avr910_devcode = 0x74;
+ pagel = 0xd7;
+ bs2 = 0xa0;
+ chip_erase_delay = 9000;
+ pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+ timeout = 200;
+ stabdelay = 100;
+ cmdexedelay = 25;
+ synchloops = 32;
+ bytedelay = 0;
+ pollindex = 3;
+ pollvalue = 0x53;
+ predelay = 1;
+ postdelay = 1;
+ pollmethod = 1;
+
+ idr = 0x31;
+ spmcr = 0x57;
+ allowfullpagebitstream = no;
+
+ memory "eeprom"
+ paged = no; /* leave this "no" */
+ page_size = 8; /* for parallel programming */
+ size = 2048;
+ min_write_delay = 9000;
+ max_write_delay = 9000;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read = " 1 0 1 0 0 0 0 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ write = " 1 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_lo = " 1 1 0 0 0 0 0 1",
+ " 0 0 0 0 0 0 0 0",
+ " 0 0 0 0 0 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 1 1 0 0 0 0 1 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 0 0 0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 4;
+ readsize = 256;
+ ;
+
+ memory "flash"
+ paged = yes;
+ size = 65536;
+ page_size = 256;
+ num_pages = 256;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read_lo = " 0 0 1 0 0 0 0 0",
+ " a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ read_hi = " 0 0 1 0 1 0 0 0",
+ " a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ loadpage_lo = " 0 1 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_hi = " 0 1 0 0 1 0 0 0",
+ " 0 0 0 0 0 0 0 0",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 0 1 0 0 1 1 0 0",
+ " a15 a14 a13 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " 0 0 0 0 0 0 0 0";
+
+ mode = 0x41;
+ delay = 10;
+ blocksize = 128;
+ readsize = 256;
+ ;
+
+ memory "lock"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x x x o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 1 1 i i i i i i";
+ ;
+
+ memory "lfuse"
+ size = 1;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "hfuse"
+ size = 1;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 i i i i i i i i";
+ ;
+
+ memory "efuse"
+ size = 1;
+
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
+ "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i";
+ ;
+
+# ATmega6450 has Signature Bytes: 0x1E 0x96 0x06..
+ memory "signature"
+ size = 3;
+ read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 a1 a0 o o o o o o o o";
+ ;
+
+ memory "calibration"
+ size = 1;
+
+ read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+ ;
+ ;