avr
/
avrdude
mirror of https://github.com/mariusgreuel/avrdude.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity

Submitted by Thomas Pircher: 

patch #6927: Documentation patches
* doc/avrdude.texi: Fix various typos, and remove the last
remnants of obsoleted options -i/-o/-m/-f.
* avrdude.1: Merge typo fixes from avrdude.texi where
applicable.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@914 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch 2010-01-14 15:11:47 +00:00
parent e2abbd7d84
commit 96a8a9142c
3 changed files with 31 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
ChangeLog
View File

@ -1,4 +1,13 @@
2010-01-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
2010-01-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Thomas Pircher:
patch #6927: Documentation patches
* doc/avrdude.texi: Fix various typos, and remove the last
remnants of obsoleted options -i/-o/-m/-f.
* avrdude.1: Merge typo fixes from avrdude.texi where
applicable.
2010-01-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.1: Update documentation to match the reality (device
support, memory areas).

4
avrdude.1
View File

@ -150,7 +150,7 @@ has a firmware version of at least 6.11 (decimal).
The USBasp ISP and USBtinyISP adapters are also supported, provided
.Nm avrdude
has been compiled with libusb support.
They both feature simple firwmare-only USB implementations, running on
They both feature simple firmware-only USB implementations, running on
an ATmega8 (or ATmega88), or ATtiny2313, respectively.
.Pp
Input files can be provided, and output files can be written in
@ -844,7 +844,7 @@ line.
DebugWire mode is initiated by activating the
.Ql DWEN
fuse, and then power-cycling the target.
While this mode is mainly intented for debugging/emulation, it
While this mode is mainly intended for debugging/emulation, it
also offers limited programming capabilities.
Effectively, the only memory areas that can be read or programmed
in this mode are flash ROM and EEPROM.

39
doc/avrdude.texi
View File

@ -139,7 +139,7 @@ all chip memory types (eeprom, flash, fuse bits, lock bits, signature
bytes) or via an interactive (terminal) mode. Using AVRDUDE from the
command line works well for programming the entire memory of the chip
from the contents of a file, while interactive mode is useful for
exploring memory contents, modifing individual bytes of eeprom,
exploring memory contents, modifying individual bytes of eeprom,
programming fuse/lock bits, etc.
AVRDUDE supports the following basic programmer types: Atmel's STK500,
@ -177,12 +177,12 @@ opposed to being an external device.
The fundamental difference between the two types lies in the
protocol used to control the programmer. The avr910 protocol is very
simplistic and can easily be used as the basis for a simple, home made
programer since the firmware is available online. On the other hand,
programmer since the firmware is available online. On the other hand,
the STK500 protocol is more robust and complicated and the firmware is
not openly available.
The JTAG ICE also uses a serial communication protocol which is similar
to the STK500 firmware version 2 one. However, as the JTAG ICE is
intented to allow on-chip debugging as well as memory programming, the
intended to allow on-chip debugging as well as memory programming, the
protocol is more sophisticated.
(The JTAG ICE mkII protocol can also be run on top of USB.)
Only the memory programming functionality of the JTAG ICE is supported
@ -217,7 +217,7 @@ below for details.
The USBasp ISP and USBtinyISP adapters are also supported, provided AVRDUDE
has been compiled with libusb support.
They both feature simple firwmare-only USB implementations, running on
They both feature simple firmware-only USB implementations, running on
an ATmega8 (or ATmega88), or ATtiny2313, respectively.
@ -721,7 +721,7 @@ Disables the default behaviour of reading out the fuses three times before
programming, then verifying at the end of programming that the fuses have not
changed. If you want to change fuses you will need to specify this option,
as avrdude will see the fuses have changed (even though you wanted to) and
will change them back for your "saftey". This option was designed to
will change them back for your "safety". This option was designed to
prevent cases of fuse bits magically changing (usually called @emph{safemode}).
@item -t
@ -730,10 +730,9 @@ or downloading files. See below for a detailed description of the
terminal mode.
@item -U @var{memtype}:@var{op}:@var{filename}[:@var{format}]
Perform a memory operation, equivalent to specifing the @option{-m},
@option{-i} or @option{-o}, and @option{-f} options, except that
multiple @option{-U} optins can be specified in order to operate on
mulitple memories on the same command-line invocation. The
Perform a memory operation.
Multiple @option{-U} options can be specified in order to operate on
multiple memories on the same command-line invocation. The
@var{memtype} field specifies the memory type to operate on. Use
the @option{-v} option on the command line or the @code{part} command from
terminal mode to display all the memory types supported by a particular
@ -808,8 +807,8 @@ raw binary; little-endian byte order, in the case of the flash ROM data
@itemx m
immediate mode; actual byte values specified on the command line,
seperated by commas or spaces in place of the @var{filename} field of
the @option{-i}, @option{-o}, or @option{-U} options. This is useful
separated by commas or spaces in place of the @var{filename} field of
the @option{-U} option. This is useful
for programming fuse bytes without having to create a single-byte file
or enter terminal mode. If the number specified begins with @code{0x},
it is treated as a hex value. If the number otherwise begins with a
@ -1425,15 +1424,15 @@ directory as the executable.
@table @code
@item default_parallel = "@var{default-parallel-device}";
Assign the default parallel port device. Can be overidden using the
Assign the default parallel port device. Can be overridden using the
@option{-P} option.
@item default_serial = "@var{default-serial-device}";
Assign the default serial port device. Can be overidden using the
Assign the default serial port device. Can be overridden using the
@option{-P} option.
@item default_programmer = "@var{default-programmer-id}";
Assign the default programmer id. Can be overidden using the @option{-c}
Assign the default programmer id. Can be overridden using the @option{-c}
option.
@end table
@ -1519,7 +1518,7 @@ part
@subsection Instruction Format
@noindent
Instruction formats are specified as a comma seperated list of string
Instruction formats are specified as a comma separated list of string
values containing information (bit specifiers) about each of the 32 bits
of the instruction. Bit specifiers may be one of the following formats:
@ -1827,7 +1826,7 @@ obtained.
@subsubsection Linux Installation
@noindent
On rpm based linux systems (such as RedHat, SUSE, Mandrake, etc), you
On rpm based Linux systems (such as RedHat, SUSE, Mandrake, etc), you
can build and install the rpm binaries directly from the tarball:
@example
@ -2211,7 +2210,7 @@ Solution: This problem seems to appear with certain versions of Cygwin. Specifyi
@item
Problem: I'm using linux and my AVR910 programmer is really slow.
Problem: I'm using Linux and my AVR910 programmer is really slow.
Solution (short): @code{setserial @var{port} low_latency}
@ -2231,7 +2230,7 @@ your own risk.
@item
Problem: I'm not using linux and my AVR910 programmer is really slow.
Problem: I'm not using Linux and my AVR910 programmer is really slow.
Solutions: The reasons for this are the same as above.
If you know how to work around this on your OS, please let us know.
@ -2279,7 +2278,7 @@ protocol. The ICE needs to be connected to the target using the
JTAG-to-ISP adapter, so the JTAG ICE mkII can be used as a debugWire
initiator as well as an ISP programmer. AVRDUDE will then be activated
using the @var{jtag2isp} programmer type. The initial ISP
communication attempt will fail, but AVRDUDE then tries to iniate a
communication attempt will fail, but AVRDUDE then tries to initiate a
debugWire reset. When successful, this will leave the target AVR in a
state where it can accept standard ISP communication. The ICE is then
signed off (which will make it signing off from the USB as well), so
@ -2316,7 +2315,7 @@ protocol to allow an in-circuit emulation of the smaller AVR devices,
using the @var{/RESET} line.
DebugWire mode is initiated by activating the @var{DWEN}
fuse, and then power-cycling the target.
While this mode is mainly intented for debugging/emulation, it
While this mode is mainly intended for debugging/emulation, it
also offers limited programming capabilities.
Effectively, the only memory areas that can be read or programmed
in this mode are flash ROM and EEPROM.