Merge pull request #1102 from MCUdude/flip2-reset

Add support for Flip 2 reset on exit
This commit is contained in:
Stefan Rueger 2022-10-05 22:02:22 +01:00 committed by GitHub
commit 83232bc7e1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 65 additions and 74 deletions

View File

@ -462,11 +462,17 @@ MCU type, a previous invocation of
.Nm
with this option specified is one of the possible ways to guarantee this
condition.
.Em reset
is supported by the linuxspi and flip2 programmer options, as well as all
parallel port based programmers.
.It Ar noreset
The
.Ql /RESET
line will be deactivated at program exit, thus allowing the MCU target
program to run while the programming hardware remains connected.
.Em noreset
is supported by the linuxspi and flip2 programmer options, as well as all
parallel port based programmers.
.It Ar vcc
This option will leave those parallel port pins active
.Pq \&i. \&e. Em high

View File

@ -556,12 +556,16 @@ Note in particular that the programming algorithm for the AT90S1200
device mandates that the `/RESET' signal is active before powering up
the MCU, so in case an external power supply is used for this MCU type,
a previous invocation of AVRDUDE with this option specified is one of
the possible ways to guarantee this condition.
the possible ways to guarantee this condition. @code{reset} is supported
by the @code{linuxspi} and @code{flip2} programmer options, as well as
all parallel port based programmers.
@item noreset
The `/RESET' line will be deactivated at program exit, thus allowing the
MCU target program to run while the programming hardware remains
connected.
connected. @code{noreset} is supported by the @code{linuxspi} and
@code{flip2} programmer options, as well as all parallel port based
programmers.
@item vcc
This option will leave those parallel port pins active (i. e. high) that

View File

@ -131,6 +131,7 @@ static void flip2_disable(const PROGRAMMER *pgm);
static void flip2_display(const PROGRAMMER *pgm, const char *prefix);
static int flip2_program_enable(const PROGRAMMER *pgm, const AVRPART *part);
static int flip2_chip_erase(const PROGRAMMER *pgm, const AVRPART *part);
static int flip2_start_app(const PROGRAMMER *pgm);
static int flip2_read_byte(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
unsigned long addr, unsigned char *value);
static int flip2_write_byte(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
@ -140,6 +141,7 @@ static int flip2_paged_load(const PROGRAMMER *pgm, const AVRPART *part, const AV
static int flip2_paged_write(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
unsigned int page_size, unsigned int addr, unsigned int n_bytes);
static int flip2_read_sig_bytes(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem);
static int flip2_parseexitspecs(PROGRAMMER* pgm, const char *s);
static void flip2_setup(PROGRAMMER * pgm);
static void flip2_teardown(PROGRAMMER * pgm);
@ -166,10 +168,6 @@ static const char * flip2_status_str(const struct dfu_status *status);
static const char * flip2_mem_unit_str(enum flip2_mem_unit mem_unit);
static enum flip2_mem_unit flip2_mem_unit(const char *name);
#endif /* HAVE_LIBUSB */
/* THE INITPGM FUNCTION DEFINITIONS */
void flip2_initpgm(PROGRAMMER *pgm) {
strcpy(pgm->type, "flip2");
@ -187,11 +185,11 @@ void flip2_initpgm(PROGRAMMER *pgm) {
pgm->read_byte = flip2_read_byte;
pgm->write_byte = flip2_write_byte;
pgm->read_sig_bytes = flip2_read_sig_bytes;
pgm->parseexitspecs = flip2_parseexitspecs;
pgm->setup = flip2_setup;
pgm->teardown = flip2_teardown;
}
#ifdef HAVE_LIBUSB
/* EXPORTED PROGRAMMER FUNCTION DEFINITIONS */
int flip2_open(PROGRAMMER *pgm, const char *port_spec) {
@ -315,6 +313,9 @@ flip2_initialize_fail:
void flip2_close(PROGRAMMER* pgm)
{
if (FLIP2(pgm)->dfu != NULL) {
if (pgm->exit_reset == EXIT_RESET_ENABLED)
flip2_start_app(pgm);
dfu_close(FLIP2(pgm)->dfu);
FLIP2(pgm)->dfu = NULL;
}
@ -375,6 +376,22 @@ int flip2_chip_erase(const PROGRAMMER *pgm, const AVRPART *part) {
return cmd_result;
}
int flip2_start_app(const PROGRAMMER *pgm) {
avrdude_message(MSG_INFO, "%s: Starting application\n", progname);
struct flip2_cmd cmd = {
FLIP2_CMD_GROUP_EXEC, FLIP2_CMD_START_APP, { 0x00, 0, 0, 0 }
};
// queue command
int cmd_result = dfu_dnload(FLIP2(pgm)->dfu, &cmd, sizeof(cmd));
// repeat dnload to actually execute
dfu_dnload(FLIP2(pgm)->dfu, &cmd, sizeof(cmd));
return cmd_result;
}
int flip2_read_byte(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
unsigned long addr, unsigned char *value)
{
@ -489,6 +506,29 @@ int flip2_paged_write(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *
return (result == 0) ? n_bytes : -1;
}
// Parse the -E option flag
int flip2_parseexitspecs(PROGRAMMER *pgm, const char *sp) {
char *cp, *s, *str = cfg_strdup("flip2_parseextitspecs()", sp);
s = str;
while ((cp = strtok(s, ","))) {
s = NULL;
if (!strcmp(cp, "reset")) {
pgm->exit_reset = EXIT_RESET_ENABLED;
continue;
}
if (!strcmp(cp, "noreset")) {
pgm->exit_reset = EXIT_RESET_DISABLED;
continue;
}
free(str);
return -1;
}
free(str);
return 0;
}
int flip2_read_sig_bytes(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem) {
if (FLIP2(pgm)->dfu == NULL)
return -1;
@ -905,76 +945,17 @@ enum flip2_mem_unit flip2_mem_unit(const char *name) {
return FLIP2_MEM_UNIT_UNKNOWN;
}
#else /* HAVE_LIBUSB */
#else /* !HAVE_LIBUSB */
/* EXPORTED PROGRAMMER FUNCTION DEFINITIONS */
int flip2_open(PROGRAMMER *pgm, const char *port_spec) {
fprintf(stderr, "%s: Error: No USB support in this compile of avrdude\n",
progname);
// Give a proper error if we were not compiled with libusb
static int flip2_nousb_open(PROGRAMMER* pgm, const char* name) {
avrdude_message(MSG_INFO, "%s: error, no USB support; please compile with libusb installed\n", progname);
return -1;
}
int flip2_initialize(const PROGRAMMER *pgm, const AVRPART *part) {
return -1;
void flip2_initpgm(PROGRAMMER *pgm) {
strcpy(pgm->type, "flip2");
pgm->open = flip2_nousb_open;
}
void flip2_close(PROGRAMMER* pgm)
{
}
void flip2_enable(PROGRAMMER *pgm, const AVRPART *p) {
}
void flip2_disable(const PROGRAMMER *pgm) {
}
void flip2_display(const PROGRAMMER *pgm, const char *prefix) {
}
int flip2_program_enable(const PROGRAMMER *pgm, const AVRPART *part) {
return -1;
}
int flip2_chip_erase(const PROGRAMMER *pgm, const AVRPART *part) {
return -1;
}
int flip2_read_byte(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
unsigned long addr, unsigned char *value)
{
return -1;
}
int flip2_write_byte(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
unsigned long addr, unsigned char value)
{
return -1;
}
int flip2_paged_load(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
unsigned int page_size, unsigned int addr, unsigned int n_bytes)
{
return -1;
}
int flip2_paged_write(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem,
unsigned int page_size, unsigned int addr, unsigned int n_bytes)
{
return -1;
}
int flip2_read_sig_bytes(const PROGRAMMER *pgm, const AVRPART *part, const AVRMEM *mem) {
return -1;
}
void flip2_setup(PROGRAMMER * pgm)
{
}
void flip2_teardown(PROGRAMMER * pgm)
{
}
#endif /* HAVE_LIBUSB */