From 73cfe88386abb2ada646f9157040b9c7033ed438 Mon Sep 17 00:00:00 2001 From: Joerg Wunsch Date: Wed, 20 Sep 2006 21:32:18 +0000 Subject: [PATCH] * avr910.c: As there is a lot of ambiguity about the AVR910 device codes, allow the user to override the device code verification with the -F option. * main.c: Make ovsigck a global variable. git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@665 81a1dc3b-b13d-400b-aceb-764788c761c2 --- ChangeLog | 7 +++++++ avr910.c | 19 +++++++++++++------ main.c | 2 +- 3 files changed, 21 insertions(+), 7 deletions(-) diff --git a/ChangeLog b/ChangeLog index dd721e80..6e5da182 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,10 @@ +2006-09-20 Joerg Wunsch + + * avr910.c: As there is a lot of ambiguity about the AVR910 + device codes, allow the user to override the device code + verification with the -F option. + * main.c: Make ovsigck a global variable. + 2006-09-20 Joerg Wunsch Add the "stk500generic" programmer that auto-probes for STK500 diff --git a/avr910.c b/avr910.c index c61de2b5..6a6421ff 100644 --- a/avr910.c +++ b/avr910.c @@ -40,6 +40,7 @@ extern char * progname; extern int do_cycles; +extern int ovsigck; static char has_auto_incr_addr; @@ -134,7 +135,7 @@ static int avr910_initialize(PROGRAMMER * pgm, AVRPART * p) char hw[2]; char buf[10]; char type; - char c; + char c, devtype_1st; int dev_supported = 0; AVRPART * part; @@ -173,8 +174,11 @@ static int avr910_initialize(PROGRAMMER * pgm, AVRPART * p) avr910_send(pgm, "t", 1); fprintf(stderr, "\nProgrammer supports the following devices:\n"); + devtype_1st = 0; while (1) { avr910_recv(pgm, &c, 1); + if (devtype_1st == 0) + devtype_1st = c; if (c == 0) break; part = locate_part_by_avr910_devcode(part_list, c); @@ -190,15 +194,18 @@ static int avr910_initialize(PROGRAMMER * pgm, AVRPART * p) if (!dev_supported) { fprintf(stderr, - "%s: error: selected device is not supported by programmer: %s\n", - progname, p->id); - exit(1); + "%s: %s: selected device is not supported by programmer: %s\n", + progname, ovsigck? "warning": "error", p->id); + if (!ovsigck) + exit(1); } - /* Tell the programmer which part we selected. */ + /* Tell the programmer which part we selected. + If the user forced the selection, use the first device + type that is supported by the programmer. */ buf[0] = 'T'; - buf[1] = p->avr910_devcode; + buf[1] = ovsigck? devtype_1st: p->avr910_devcode; avr910_send(pgm, buf, 2); avr910_vfy_cmd_sent(pgm, "select device"); diff --git a/main.c b/main.c index 0388d654..6025122a 100644 --- a/main.c +++ b/main.c @@ -76,6 +76,7 @@ char * version = VERSION; int verbose; /* verbose output */ int quell_progress; /* un-verebose output */ +int ovsigck; /* 1=override sig check, 0=don't */ char * progname; char progbuf[PATH_MAX]; /* temporary buffer of spaces the same length as progname; used for lining up @@ -683,7 +684,6 @@ int main(int argc, char * argv []) int erase; /* 1=erase chip, 0=don't */ int auto_erase; /* 0=never erase unless explicity told to do so, 1=erase if we are going to program flash */ - int ovsigck; /* 1=override sig check, 0=don't */ char * port; /* device port (/dev/xxx) */ int terminal; /* 1=enter terminal mode, 0=don't */ int nowrite; /* don't actually write anything to the chip */