Reformat conditional programmers in avrdude.conf.in using -c*

This commit is contained in:
Stefan Rueger 2022-08-24 10:57:25 +01:00
parent 57ebd36a01
commit 716984dbb1
No known key found for this signature in database
GPG Key ID: B0B4F1FD86B1EC55
3 changed files with 261 additions and 182 deletions

View File

@ -375,13 +375,16 @@ default_spi = "@DEFAULT_SPI_PORT@";
# default_bitclock = 2.5;
@HAVE_PARPORT_BEGIN@
# Parallel port programmers.
# Parallel port programmers
#------------------------------------------------------------
# bsd
#------------------------------------------------------------
programmer
id = "bsd";
desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
type = "par";
connection_type = parallel;
vcc = 2, 3, 4, 5;
reset = 7;
sck = 8;
@ -389,18 +392,25 @@ programmer
miso = 10;
;
#------------------------------------------------------------
# stk200
#------------------------------------------------------------
programmer
id = "stk200";
desc = "STK200";
type = "par";
connection_type = parallel;
buff = 4, 5;
reset = 9;
sck = 6;
mosi = 7;
reset = 9;
miso = 10;
;
#------------------------------------------------------------
# pony-stk200
#------------------------------------------------------------
# The programming dongle used by the popular Ponyprog
# utility. It is almost similar to the STK200 one,
# except that there is a LED indicating that the
@ -409,30 +419,42 @@ programmer
programmer parent "stk200"
id = "pony-stk200";
desc = "Pony Prog STK200";
type = "par";
pgmled = 8;
;
#------------------------------------------------------------
# dt006
#------------------------------------------------------------
programmer
id = "dt006";
desc = "Dontronics DT006";
type = "par";
connection_type = parallel;
reset = 4;
sck = 5;
mosi = 2;
miso = 11;
;
#------------------------------------------------------------
# bascom
#------------------------------------------------------------
programmer parent "dt006"
id = "bascom";
desc = "Bascom SAMPLE programming cable";
type = "par";
;
#------------------------------------------------------------
# alf
#------------------------------------------------------------
programmer
id = "alf";
desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
type = "par";
connection_type = parallel;
vcc = 2, 3, 4, 5;
buff = 6;
reset = 7;
@ -445,51 +467,66 @@ programmer
vfyled = 17;
;
#------------------------------------------------------------
# sp12
#------------------------------------------------------------
programmer
id = "sp12";
desc = "Steve Bolt's Programmer";
type = "par";
connection_type = parallel;
vcc = 4,5,6,7,8;
vcc = 4, 5, 6, 7, 8;
reset = 3;
sck = 2;
mosi = 9;
miso = 11;
;
#------------------------------------------------------------
# picoweb
#------------------------------------------------------------
programmer
id = "picoweb";
desc = "Picoweb Programming Cable, http://www.picoweb.net/";
type = "par";
connection_type = parallel;
reset = 2;
sck = 3;
mosi = 4;
miso = 13;
;
#------------------------------------------------------------
# abcmini
#------------------------------------------------------------
programmer
id = "abcmini";
desc = "ABCmini Board, aka Dick Smith HOTCHIP";
type = "par";
connection_type = parallel;
reset = 4;
sck = 3;
mosi = 2;
miso = 10;
;
#------------------------------------------------------------
# futurlec
#------------------------------------------------------------
programmer
id = "futurlec";
desc = "Futurlec.com programming cable.";
type = "par";
connection_type = parallel;
reset = 3;
sck = 2;
mosi = 1;
miso = 10;
;
#------------------------------------------------------------
# xil
#------------------------------------------------------------
# From the contributor of the "xil" jtag cable:
# The "vcc" definition isn't really vcc (the cable gets its power from
@ -498,25 +535,27 @@ programmer
# avrdude versions before 5.5j).
# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK
# to SCK (plus vcc/gnd of course)
programmer
id = "xil";
desc = "Xilinx JTAG cable";
type = "par";
connection_type = parallel;
mosi = 2;
sck = 3;
reset = 4;
buff = 5;
miso = 13;
vcc = 6;
buff = 5;
reset = 4;
sck = 3;
mosi = 2;
miso = 13;
;
#------------------------------------------------------------
# dapa
#------------------------------------------------------------
programmer
id = "dapa";
desc = "Direct AVR Parallel Access cable";
type = "par";
connection_type = parallel;
vcc = 3;
reset = 16;
sck = 1;
@ -524,65 +563,87 @@ programmer
miso = 11;
;
#------------------------------------------------------------
# atisp
#------------------------------------------------------------
programmer
id = "atisp";
desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
type = "par";
connection_type = parallel;
reset = ~6;
sck = ~8;
mosi = ~7;
miso = ~10;
;
#------------------------------------------------------------
# ere-isp-avr
#------------------------------------------------------------
programmer
id = "ere-isp-avr";
desc = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
type = "par";
connection_type = parallel;
reset = ~4;
sck = 3;
mosi = 2;
miso = 10;
;
#------------------------------------------------------------
# blaster
#------------------------------------------------------------
programmer
id = "blaster";
desc = "Altera ByteBlaster";
type = "par";
connection_type = parallel;
sck = 2;
miso = 11;
reset = 3;
mosi = 8;
buff = 14;
reset = 3;
sck = 2;
mosi = 8;
miso = 11;
;
#------------------------------------------------------------
# frank-stk200
#------------------------------------------------------------
# It is almost same as pony-stk200, except vcc on pin 5 to auto
# disconnect port (download on http://electropol.free.fr/spip/spip.php?article27)
programmer parent "pony-stk200"
id = "frank-stk200";
desc = "Frank STK200";
buff = ; # delete buff pin assignment
type = "par";
vcc = 5;
buff = ; # delete buff pin assignment
;
#------------------------------------------------------------
# 89isp
#------------------------------------------------------------
# The AT98ISP Cable is a simple parallel dongle for AT89 family.
# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
programmer
id = "89isp";
desc = "Atmel at89isp cable";
type = "par";
connection_type = parallel;
reset = 17;
sck = 1;
mosi = 2;
miso = 10;
;
@HAVE_PARPORT_END@
@HAVE_LINUXGPIO_BEGIN@
#------------------------------------------------------------
# linuxgpio
#------------------------------------------------------------
#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface
#
#To enable it set the configuration below to match the GPIO lines connected to the
@ -606,13 +667,17 @@ programmer
#;
@HAVE_LINUXGPIO_END@
@HAVE_LINUXSPI_BEGIN@
#------------------------------------------------------------
# linuxspi
#------------------------------------------------------------
# This programmer uses the built in linux SPI bus devices to program an
# attached AVR. The reset pin must be attached to a GPIO pin that
# is otherwise unused (see gpioinfo(1)); the SPI bus CE pins are not
# suitable since they would release /RESET too early.
#
programmer
id = "linuxspi";
desc = "Use Linux SPI device in /dev/spidev*";
@ -631,8 +696,8 @@ programmer
#------------------------------------------------------------
# http://wiring.org.co/
# Basically STK500v2 protocol, with some glue to trigger the
# bootloader.
# Basically STK500v2 protocol, with some glue to trigger the bootloader
programmer
id = "wiring";
desc = "Wiring";
@ -714,6 +779,7 @@ programmer
# This is an implementation of the above with a buffer IC (74AC244) and
# 4 LEDs directly attached, all active low.
programmer
id = "2232HIO";
desc = "FT2232H based generic programmer";
@ -744,15 +810,12 @@ programmer
#The FT4232H can be treated as FT2232H, but it has a different USB
#device ID of 0x6011.
programmer parent "avrftdi"
id = "4232h";
desc = "FT4232H based generic programmer";
type = "avrftdi";
usbpid = 0x6011;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
;
#------------------------------------------------------------
@ -792,8 +855,8 @@ programmer
usbvid = 0x0403;
usbpid = 0x6014;
usbdev = "A";
reset = 3; # AD3 (TMS)
#ISP-signals
reset = 3; # AD3 (TMS)
sck = 0; # AD0 (TCK)
mosi = 1; # AD1 (TDI)
miso = 2; # AD2 (TDO)
@ -810,15 +873,12 @@ programmer
# Pin J2-6 is GND
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer parent "ft232h"
id = "um232h";
desc = "UM232H module from FTDI";
type = "avrftdi";
usbpid = 0x6014;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
;
#------------------------------------------------------------
@ -832,15 +892,12 @@ programmer parent "ft232h"
# Black (Pin 10) is GND
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer parent "ft232h"
id = "c232hm";
desc = "C232HM cable from FTDI";
type = "avrftdi";
usbpid = 0x6014;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
;
#------------------------------------------------------------
@ -860,6 +917,7 @@ programmer parent "ft232h"
# http://armwerks.com/catalog/o-link-debugger-copy/
# or just have a look at ebay ...
# It is basically the same entry as jtagkey with different usb ids.
programmer parent "jtagkey"
id = "o-link";
desc = "O-Link, OpenJTAG from www.100ask.net";
@ -868,11 +926,6 @@ programmer parent "jtagkey"
usbpid = 0x5118;
usbvendor = "www.100ask.net";
usbproduct = "USB<=>JTAG&RS232";
buff = ~4;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
;
#------------------------------------------------------------
@ -880,6 +933,7 @@ programmer parent "jtagkey"
#------------------------------------------------------------
# http://wiki.openmoko.org/wiki/Debug_Board_v3
programmer
id = "openmoko";
desc = "Openmoko debug board (v3)";
@ -899,6 +953,7 @@ programmer
# Only Rev. A boards.
# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf
programmer
id = "lm3s811";
desc = "Luminary Micro LM3S811 Eval Board (Rev. A)";
@ -923,6 +978,7 @@ programmer
#------------------------------------------------------------
# submitted as bug #46020
programmer
id = "tumpa";
desc = "TIAO USB Multi-Protocol Adapter";
@ -958,6 +1014,7 @@ programmer
# * Connect JTAG connector pin 1 to 5V (i.e. EXT pin 13 or JTAG pin 19).
# * For TPI connection use resistors: TDO --[470R]-- TPIDATA --[470R]-- TDI.
# * Powering target from JTAG pin 19 allows KT-LINK current measurement.
programmer
id = "ktlink";
desc = "KT-LINK FT2232H interface with IO switching and voltage buffers.";
@ -1065,6 +1122,7 @@ programmer
# Attempts to select the correct firmware version
# by probing for it. Better use one of the entries
# below instead.
programmer
id = "stk500";
desc = "Atmel STK500";
@ -1206,6 +1264,7 @@ programmer
#------------------------------------------------------------
# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega
programmer
id = "bwmega";
desc = "BitWizard ftdi_atmega builtin programmer";
@ -1223,6 +1282,7 @@ programmer
# see http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html
# Note: pins are numbered from 1!
programmer
id = "arduino-ft232r";
desc = "Arduino: FT232R connected to ISP";
@ -1243,9 +1303,9 @@ programmer
desc = "Tag-Connect TC2030";
type = "ftdi_syncbb";
connection_type = usb;
# FOR TPI devices:
reset = 3; # CTS = D3 (wire to ~RESET)
sck = 2; # RTS = D2 (wire to SCK)
# FOR TPI devices:
mosi = 0; # TxD = D0 (wire to TPIDATA via 1k resistor)
miso = 1; # RxD = D1 (wire to TPIDATA directly)
;
@ -1255,14 +1315,11 @@ programmer
#------------------------------------------------------------
# website mentioned above uses this id
programmer parent "arduino-ft232r"
id = "diecimila";
desc = "alias for arduino-ft232r";
type = "ftdi_syncbb";
reset = 7;
sck = 5;
mosi = 6;
miso = 3;
;
#------------------------------------------------------------
@ -1275,6 +1332,7 @@ programmer parent "arduino-ft232r"
# Its 4 pairs of pins are shorted to enable ftdi_syncbb.
# http://akizukidenshi.com/catalog/g/gP-07487/
# http://akizukidenshi.com/download/ds/akizuki/k6096_manual_20130816.pdf
programmer
id = "uncompatino";
desc = "uncompatino with all pairs of pins shorted";
@ -1303,6 +1361,7 @@ programmer
# TTL-232R RTS 6 Green -> ICPS MISO (pin 1)
# Except for VCC and GND, you can connect arbitual pairs as long as
# the following table is adjusted.
programmer
id = "ttl232r";
desc = "FTDI TTL232R-5V with ICSP adapter";
@ -1380,6 +1439,7 @@ programmer
# In that case, a resistor of 1 kOhm is needed between MISO and MOSI
# pins of the connector, and MISO (pin 1 of the 6-pin connector)
# connects to TPIDATA.
programmer
id = "usbtiny";
desc = "USBtiny simple USB programmer, https://learn.adafruit.com/usbtinyisp";
@ -1420,6 +1480,7 @@ programmer
#------------------------------------------------------------
# commercial version of USBtiny, using a separate VID/PID
programmer
id = "ehajo-isp";
desc = "avr-isp-programmer from eHaJo, http://www.eHaJo.de";
@ -1435,6 +1496,7 @@ programmer
# commercial version of USBtiny, using a separate VID/PID
# https://github.com/IowaScaledEngineering/ckt-avrprogrammer
programmer
id = "iseavrprog";
desc = "USBtiny-based programmer, https://iascaled.com";
@ -1508,6 +1570,7 @@ programmer
#------------------------------------------------------------
# suggested in http://forum.mikrokopter.de/topic-post48317.html
programmer
id = "mkbutterfly";
desc = "Mikrokopter.de Butterfly";
@ -1541,6 +1604,7 @@ programmer
#------------------------------------------------------------
# easier to type
programmer parent "jtagmkI"
id = "jtag1";
type = "jtagmki";
@ -1551,6 +1615,7 @@ programmer parent "jtagmkI"
#------------------------------------------------------------
# easier to type
programmer parent "jtag1"
id = "jtag1slow";
type = "jtagmki";
@ -1579,6 +1644,7 @@ programmer
#------------------------------------------------------------
# easier to type
programmer parent "jtagmkII"
id = "jtag2slow";
type = "jtagmkii";
@ -1589,6 +1655,7 @@ programmer parent "jtagmkII"
#------------------------------------------------------------
# JTAG ICE mkII @ 115200 Bd
programmer parent "jtag2slow"
id = "jtag2fast";
type = "jtagmkii";
@ -1600,6 +1667,7 @@ programmer parent "jtag2slow"
#------------------------------------------------------------
# make the fast one the default, people will love that
programmer parent "jtag2fast"
id = "jtag2";
type = "jtagmkii";
@ -1610,6 +1678,7 @@ programmer parent "jtag2fast"
#------------------------------------------------------------
# JTAG ICE mkII in ISP mode
programmer
id = "jtag2isp";
desc = "Atmel JTAG ICE mkII in ISP mode";
@ -1623,6 +1692,7 @@ programmer
#------------------------------------------------------------
# JTAG ICE mkII in debugWire mode
programmer
id = "jtag2dw";
desc = "Atmel JTAG ICE mkII in debugWire mode";
@ -1636,6 +1706,7 @@ programmer
#------------------------------------------------------------
# JTAG ICE mkII in AVR32 mode
programmer
id = "jtagmkII_avr32";
desc = "Atmel JTAG ICE mkII im AVR32 mode";
@ -1649,6 +1720,7 @@ programmer
#------------------------------------------------------------
# JTAG ICE mkII in AVR32 mode
programmer
id = "jtag2avr32";
desc = "Atmel JTAG ICE mkII im AVR32 mode";
@ -1662,6 +1734,7 @@ programmer
#------------------------------------------------------------
# JTAG ICE mkII in PDI mode
programmer
id = "jtag2pdi";
desc = "Atmel JTAG ICE mkII PDI mode";
@ -1675,6 +1748,7 @@ programmer
#------------------------------------------------------------
# AVR Dragon in JTAG mode
programmer
id = "dragon_jtag";
desc = "Atmel AVR Dragon in JTAG mode";
@ -1688,6 +1762,7 @@ programmer
#------------------------------------------------------------
# AVR Dragon in ISP mode
programmer
id = "dragon_isp";
desc = "Atmel AVR Dragon in ISP mode";
@ -1701,6 +1776,7 @@ programmer
#------------------------------------------------------------
# AVR Dragon in PP mode
programmer
id = "dragon_pp";
desc = "Atmel AVR Dragon in PP mode";
@ -1714,6 +1790,7 @@ programmer
#------------------------------------------------------------
# AVR Dragon in HVSP mode
programmer
id = "dragon_hvsp";
desc = "Atmel AVR Dragon in HVSP mode";
@ -1727,6 +1804,7 @@ programmer
#------------------------------------------------------------
# AVR Dragon in debugWire mode
programmer
id = "dragon_dw";
desc = "Atmel AVR Dragon in debugWire mode";
@ -1740,6 +1818,7 @@ programmer
#------------------------------------------------------------
# AVR Dragon in PDI mode
programmer
id = "dragon_pdi";
desc = "Atmel AVR Dragon in PDI mode";
@ -2170,10 +2249,6 @@ programmer parent "ponyser"
id = "siprog";
desc = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
type = "serbb";
reset = ~3;
sck = 7;
mosi = 4;
miso = 8;
;
#------------------------------------------------------------

View File

@ -1147,6 +1147,7 @@ static void dev_pgm_strct(const PROGRAMMER *pgm, bool tsv, const PROGRAMMER *bas
}
_if_pgmout_str(strcmp, cfg_escape(pgm->desc), desc);
if(!base || base->initpgm != pgm->initpgm)
_pgmout_fmt("type", "\"%s\"", locate_programmer_type_id(pgm->initpgm));
if(!base || base->conntype != pgm->conntype)
_pgmout_fmt("connection_type", "%s", connstr(pgm->conntype));
@ -1182,10 +1183,13 @@ static void dev_pgm_strct(const PROGRAMMER *pgm, bool tsv, const PROGRAMMER *bas
for(int i=0; i<N_PINS; i++) {
char *str = pins_to_strdup(pgm->pin+i);
if(str && *str)
char *bstr = base? pins_to_strdup(base->pin+i): NULL;
if(!base || strcmp(bstr, str))
_pgmout_fmt(avr_pin_lcname(i), "%s", str);
if(str)
free(str);
if(bstr)
free(bstr);
}
if(pgm->hvupdi_support && lfirst(pgm->hvupdi_support)) {

View File

@ -350,7 +350,7 @@ const char * pins_to_str(const struct pindef_t * const pindef) {
* This function returns a string of defined pins, eg, ~1, 2, ~4, ~5, 7 or ""
*
* @param[in] pindef the pin definition for which we want the string representation
* @returns a pointer to a string, which was created by strdup
* @returns a pointer to a string, which was created by cfg_strdup()
*/
char *pins_to_strdup(const struct pindef_t * const pindef) {
char buf[6*(PIN_MAX+1)], *p = buf;